Hi,

I've build u_boot 1.1.1 for the at91rm9200dk board and it runs well. Verify that TEXT_ADDR in board/at91rm9200dk/config.mk is compliant with your load address in sdram.

Hamid

-----Original Message----- From: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of Kögler Peter Sent: jeudi 1 juillet 2004 12:01 To: 'u-boot-users@lists.sourceforge.net' Subject: [U-Boot-Users] u-boot 1.1.1 does NOT work on at91rm9200

hi, i try to run u-boot 1.1.1 on our custom-board, but it does not start at all.

Our board runs already with u-boot 0.4.0. We use an urloader to do basic initialization and then unpack u-boot to ram. after u-boot we start linux. every thing works.

I transfered our board specific settings from the 0.4 u-boot to the 1.1 u-boot. But u-boot does not start at all.

does anybody had the same problem?

wbr peter

-------------------------------------------------------------- Peter Kögler EL-ME AG Gewerbering 1 D-84072 Au i. d. Hallertau

Tel.: +49 / 8752 / 864 - 527 Fax.: +49 / 8752 / 864 - 100 mailto.: p.koegler@el-me.de Web: www.el-me.de

------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users