[U-Boot] [PATCH v3] x86: Avoid writing temporary asl files into the source tree
At present the iasl tool (Intel ACPI (Advanced Configuration and Power Interface) Source Language Compiler) is called in such a way that it uses the source directory for its temporary files.
This means we end up with these files when building x86 boards:
board/dfi/dfi-bt700/dsdt.aml board/dfi/dfi-bt700/dsdt.asl.tmp
Update the code to put temporary files in the target directory instead.
The iasl tool is quite confusing since it generates files with different extensions and does not allow these to be individually specified. Add some documentation to help with this.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v3: - Use dsdt.asl.tmp as the temporary file again - Add ASL_TMP for the temporary file - Add some comments to make it clear what iasl does
Changes in v2: - Use dsdt.tmp.c as the temporary filename instead of dsdt.c.tmp - Remove this file with distclean
Makefile | 1 + scripts/Makefile.lib | 17 ++++++++++++++--- 2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile index 704579bec1..6a147badae 100644 --- a/Makefile +++ b/Makefile @@ -1846,6 +1846,7 @@ clean: $(clean-dirs) -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \ + -o -name 'dsdt.hex' \ -o -name '*.efi' -o -name '*.gcno' -o -name '*.so' ) \ -type f -print | xargs rm -f \ bl31.c bl31.elf bl31_*.bin image.map diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index de67677f61..7a3b51d61b 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -395,11 +395,22 @@ $(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_free
# ACPI # --------------------------------------------------------------------------- +# +# This first sends the file (typically dsdt.asl) through the preprocessor +# resolve includes and any CONFIG options used. This produces dsdt.asl.tmp +# which is pure ASL code. The Intel ASL (ACPI (Advanced Configuration and Power +# Interface) Source Language compiler (iasl) then converts this ASL code into a +# C file containing the hex data to build into U_Boot. This file is called +# dsdt.hex (despite us setting the prefix to .../dsdt.asl.tmp) so must be +# renamed to dsdt.c for consumption by the build system. +ASL_TMP = $(patsubst %.c,%.asl.tmp,$@) + quiet_cmd_acpi_c_asl= ASL $< cmd_acpi_c_asl= \ - $(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -P $(UBOOTINCLUDE) -o $<.tmp $<; \ - iasl -p $< -tc $<.tmp $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \ - mv $(patsubst %.asl,%.hex,$<) $@ + $(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -P $(UBOOTINCLUDE) \ + -o $(ASL_TMP) $< && \ + iasl -p $@ -tc $(ASL_TMP) $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \ + mv $(patsubst %.c,%.hex,$@) $@
$(obj)/dsdt.c: $(src)/dsdt.asl $(call cmd,acpi_c_asl)
Hi Simon,
On Mon, Jul 29, 2019 at 4:16 AM Simon Glass sjg@chromium.org wrote:
At present the iasl tool (Intel ACPI (Advanced Configuration and Power Interface) Source Language Compiler) is called in such a way that it uses the source directory for its temporary files.
This means we end up with these files when building x86 boards:
board/dfi/dfi-bt700/dsdt.aml board/dfi/dfi-bt700/dsdt.asl.tmp
Update the code to put temporary files in the target directory instead.
The iasl tool is quite confusing since it generates files with different extensions and does not allow these to be individually specified. Add some documentation to help with this.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3:
- Use dsdt.asl.tmp as the temporary file again
- Add ASL_TMP for the temporary file
- Add some comments to make it clear what iasl does
Changes in v2:
- Use dsdt.tmp.c as the temporary filename instead of dsdt.c.tmp
- Remove this file with distclean
Makefile | 1 + scripts/Makefile.lib | 17 ++++++++++++++--- 2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile index 704579bec1..6a147badae 100644 --- a/Makefile +++ b/Makefile @@ -1846,6 +1846,7 @@ clean: $(clean-dirs) -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
-o -name 'dsdt.hex' \
This is not needed as it is already renamed to dsdt.c by our make rules.
-o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \ -type f -print | xargs rm -f \ bl31.c bl31.elf bl31_*.bin image.mapdiff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index de67677f61..7a3b51d61b 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -395,11 +395,22 @@ $(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_free
# ACPI # --------------------------------------------------------------------------- +# +# This first sends the file (typically dsdt.asl) through the preprocessor +# resolve includes and any CONFIG options used. This produces dsdt.asl.tmp +# which is pure ASL code. The Intel ASL (ACPI (Advanced Configuration and Power +# Interface) Source Language compiler (iasl) then converts this ASL code into a +# C file containing the hex data to build into U_Boot. This file is called
nits: U-Boot
+# dsdt.hex (despite us setting the prefix to .../dsdt.asl.tmp) so must be +# renamed to dsdt.c for consumption by the build system. +ASL_TMP = $(patsubst %.c,%.asl.tmp,$@)
quiet_cmd_acpi_c_asl= ASL $< cmd_acpi_c_asl= \
$(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -P $(UBOOTINCLUDE) -o $<.tmp $<; \iasl -p $< -tc $<.tmp $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \mv $(patsubst %.asl,%.hex,$<) $@
$(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -P $(UBOOTINCLUDE) \-o $(ASL_TMP) $< && \iasl -p $@ -tc $(ASL_TMP) $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \mv $(patsubst %.c,%.hex,$@) $@$(obj)/dsdt.c: $(src)/dsdt.asl $(call cmd,acpi_c_asl) --
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com
I will fix the above issues when applying.
Regards, Bin
On Mon, Jul 29, 2019 at 9:36 AM Bin Meng bmeng.cn@gmail.com wrote:
Hi Simon,
On Mon, Jul 29, 2019 at 4:16 AM Simon Glass sjg@chromium.org wrote:
At present the iasl tool (Intel ACPI (Advanced Configuration and Power Interface) Source Language Compiler) is called in such a way that it uses the source directory for its temporary files.
This means we end up with these files when building x86 boards:
board/dfi/dfi-bt700/dsdt.aml board/dfi/dfi-bt700/dsdt.asl.tmp
Update the code to put temporary files in the target directory instead.
The iasl tool is quite confusing since it generates files with different extensions and does not allow these to be individually specified. Add some documentation to help with this.
Signed-off-by: Simon Glass sjg@chromium.org
Changes in v3:
- Use dsdt.asl.tmp as the temporary file again
- Add ASL_TMP for the temporary file
- Add some comments to make it clear what iasl does
Changes in v2:
- Use dsdt.tmp.c as the temporary filename instead of dsdt.c.tmp
- Remove this file with distclean
Makefile | 1 + scripts/Makefile.lib | 17 ++++++++++++++--- 2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile index 704579bec1..6a147badae 100644 --- a/Makefile +++ b/Makefile @@ -1846,6 +1846,7 @@ clean: $(clean-dirs) -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
-o -name 'dsdt.hex' \This is not needed as it is already renamed to dsdt.c by our make rules.
-o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \ -type f -print | xargs rm -f \ bl31.c bl31.elf bl31_*.bin image.mapdiff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index de67677f61..7a3b51d61b 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -395,11 +395,22 @@ $(obj)/%_efi.so: $(obj)/%.o $(obj)/efi_crt0.o $(obj)/efi_reloc.o $(obj)/efi_free
# ACPI # --------------------------------------------------------------------------- +# +# This first sends the file (typically dsdt.asl) through the preprocessor +# resolve includes and any CONFIG options used. This produces dsdt.asl.tmp +# which is pure ASL code. The Intel ASL (ACPI (Advanced Configuration and Power +# Interface) Source Language compiler (iasl) then converts this ASL code into a +# C file containing the hex data to build into U_Boot. This file is called
nits: U-Boot
+# dsdt.hex (despite us setting the prefix to .../dsdt.asl.tmp) so must be +# renamed to dsdt.c for consumption by the build system. +ASL_TMP = $(patsubst %.c,%.asl.tmp,$@)
quiet_cmd_acpi_c_asl= ASL $< cmd_acpi_c_asl= \
$(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -P $(UBOOTINCLUDE) -o $<.tmp $<; \iasl -p $< -tc $<.tmp $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \mv $(patsubst %.asl,%.hex,$<) $@
$(CPP) -x assembler-with-cpp -D__ASSEMBLY__ -P $(UBOOTINCLUDE) \-o $(ASL_TMP) $< && \iasl -p $@ -tc $(ASL_TMP) $(if $(KBUILD_VERBOSE:1=), >/dev/null) && \mv $(patsubst %.c,%.hex,$@) $@$(obj)/dsdt.c: $(src)/dsdt.asl $(call cmd,acpi_c_asl) --
Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com
I will fix the above issues when applying.
applied to u-boot-x86, thanks!
participants (2)
-
Bin Meng -
Simon Glass