disable internal delay through gmii_sel register, as this is done in the ar8031 phy.

Signed-off-by: Heiko Schocher hs@denx.de Cc: Tom Rini trini@ti.com ---

board/siemens/pxm2/board.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 64e69dc..559af0e 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -229,7 +229,7 @@ int board_eth_init(bd_t *bis) #endif /* #ifdef CONFIG_FACTORYSET */

/* Set rgmii mode and enable rmii clock to be sourced from chip */ - writel(RGMII_MODE_ENABLE , &cdev->miisel); + writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);

rv = cpsw_register(&cpsw_data); if (rv < 0)