[PATCH] arm64: zynqmp: Add resets property for UART nodes
From: Manikanta Guntupalli manikanta.guntupalli@amd.com
Add resets property for UART0 and UART1 nodes
Signed-off-by: Manikanta Guntupalli manikanta.guntupalli@amd.com Signed-off-by: Michal Simek michal.simek@amd.com ---
arch/arm/dts/zynqmp.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 34f592c1a85f..6a29f6101534 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -1025,6 +1025,7 @@ reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_0>; + resets = <&zynqmp_reset ZYNQMP_RESET_UART0>; };
uart1: serial@ff010000 { @@ -1036,6 +1037,7 @@ reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_UART1>; };
usb0: usb@ff9d0000 {
On 7/15/24 16:23, Michal Simek wrote:
From: Manikanta Guntupalli manikanta.guntupalli@amd.com
Add resets property for UART0 and UART1 nodes
Signed-off-by: Manikanta Guntupalli manikanta.guntupalli@amd.com Signed-off-by: Michal Simek michal.simek@amd.com
arch/arm/dts/zynqmp.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 34f592c1a85f..6a29f6101534 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -1025,6 +1025,7 @@ reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_UART0>;};
uart1: serial@ff010000 {
@@ -1036,6 +1037,7 @@ reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; power-domains = <&zynqmp_firmware PD_UART_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_UART1>;};
usb0: usb@ff9d0000 {
Applied. M
participants (1)
-
Michal Simek