[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address
Add base address header file for Stratix10 SoC
Signed-off-by: Chin Liang See clsee@altera.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Ley Foon Tan lftan@altera.com --- arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100755 arch/arm/mach-socfpga/include/mach/base_addr_s10.h
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h new file mode 100755 index 0000000..411518d --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2016, Intel Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_ +#define _SOCFPGA_S10_BASE_HARDWARE_H_ + +#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_EMAC0_ADDRESS 0xff800000 +#define SOCFPGA_EMAC1_ADDRESS 0xff802000 +#define SOCFPGA_EMAC2_ADDRESS 0xff804000 +#define SOCFPGA_SDMMC_ADDRESS 0xff808000 +#define SOCFPGA_USB0_ADDRESS 0xffb00000 +#define SOCFPGA_USB1_ADDRESS 0xffb40000 +#define SOCFPGA_NANDREGS_ADDRESS 0xffb80000 +#define SOCFPGA_NANDDATA_ADDRESS 0xffb90000 +#define SOCFPGA_UART0_ADDRESS 0xffc02000 +#define SOCFPGA_UART1_ADDRESS 0xffc02100 +#define SOCFPGA_I2C0_ADDRESS 0xffc02800 +#define SOCFPGA_I2C1_ADDRESS 0xffc02900 +#define SOCFPGA_I2C2_ADDRESS 0xffc02a00 +#define SOCFPGA_I2C3_ADDRESS 0xffc02b00 +#define SOCFPGA_I2C4_ADDRESS 0xffc02c00 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_GPIO0_ADDRESS 0xffc03200 +#define SOCFPGA_GPIO1_ADDRESS 0xffc03300 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00500 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_SPIS0_ADDRESS 0xffda2000 +#define SOCFPGA_SPIS1_ADDRESS 0xffda3000 +#define SOCFPGA_SPIM0_ADDRESS 0xffda4000 +#define SOCFPGA_SPIM1_ADDRESS 0xffda5000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000 + +#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */
On 08/03/2016 05:17 PM, Chin Liang See wrote:
Add base address header file for Stratix10 SoC
Signed-off-by: Chin Liang See clsee@altera.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Ley Foon Tan lftan@altera.com
Applied to the 01-arria10 branch , since this patch is useless in mainline as-is .
btw do you ever plan to finish the Arria10 support in mainline ?
arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100755 arch/arm/mach-socfpga/include/mach/base_addr_s10.h
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h new file mode 100755 index 0000000..411518d --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h @@ -0,0 +1,48 @@ +/*
- Copyright (C) 2016, Intel Corporation
- SPDX-License-Identifier: GPL-2.0
- */
+#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_ +#define _SOCFPGA_S10_BASE_HARDWARE_H_
+#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_EMAC0_ADDRESS 0xff800000 +#define SOCFPGA_EMAC1_ADDRESS 0xff802000 +#define SOCFPGA_EMAC2_ADDRESS 0xff804000 +#define SOCFPGA_SDMMC_ADDRESS 0xff808000 +#define SOCFPGA_USB0_ADDRESS 0xffb00000 +#define SOCFPGA_USB1_ADDRESS 0xffb40000 +#define SOCFPGA_NANDREGS_ADDRESS 0xffb80000 +#define SOCFPGA_NANDDATA_ADDRESS 0xffb90000 +#define SOCFPGA_UART0_ADDRESS 0xffc02000 +#define SOCFPGA_UART1_ADDRESS 0xffc02100 +#define SOCFPGA_I2C0_ADDRESS 0xffc02800 +#define SOCFPGA_I2C1_ADDRESS 0xffc02900 +#define SOCFPGA_I2C2_ADDRESS 0xffc02a00 +#define SOCFPGA_I2C3_ADDRESS 0xffc02b00 +#define SOCFPGA_I2C4_ADDRESS 0xffc02c00 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_GPIO0_ADDRESS 0xffc03200 +#define SOCFPGA_GPIO1_ADDRESS 0xffc03300 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00500 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_SPIS0_ADDRESS 0xffda2000 +#define SOCFPGA_SPIS1_ADDRESS 0xffda3000 +#define SOCFPGA_SPIM0_ADDRESS 0xffda4000 +#define SOCFPGA_SPIM1_ADDRESS 0xffda5000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000
+#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */
Hi Marek,
On Thu, 2016-08-04 at 07:34 +0200, Marek Vasut wrote:
On 08/03/2016 05:17 PM, Chin Liang See wrote:
Add base address header file for Stratix10 SoC
Signed-off-by: Chin Liang See clsee@altera.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Ley Foon Tan lftan@altera.com
Applied to the 01-arria10 branch , since this patch is useless in mainline as-is .
Cool and thanks. This is the patch for S10 SOCVP and I am validating my development code now.
Can we split this as another branch? Once its working with S10 SOCVP, this shall be part of mainline.
btw do you ever plan to finish the Arria10 support in mainline ?
Definitely and getting Ley Foon's help for this.
Thanks Chin Liang
arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100755 arch/arm/mach -socfpga/include/mach/base_addr_s10.h
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h new file mode 100755 index 0000000..411518d --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h @@ -0,0 +1,48 @@ +/*
- Copyright (C) 2016, Intel Corporation
- SPDX-License-Identifier: GPL-2.0
- */
+#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_ +#define _SOCFPGA_S10_BASE_HARDWARE_H_
+#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_EMAC0_ADDRESS 0xff800000 +#define SOCFPGA_EMAC1_ADDRESS 0xff802000 +#define SOCFPGA_EMAC2_ADDRESS 0xff804000 +#define SOCFPGA_SDMMC_ADDRESS 0xff808000 +#define SOCFPGA_USB0_ADDRESS 0xffb00000 +#define SOCFPGA_USB1_ADDRESS 0xffb40000 +#define SOCFPGA_NANDREGS_ADDRESS 0xffb80000 +#define SOCFPGA_NANDDATA_ADDRESS 0xffb90000 +#define SOCFPGA_UART0_ADDRESS 0xffc02000 +#define SOCFPGA_UART1_ADDRESS 0xffc02100 +#define SOCFPGA_I2C0_ADDRESS 0xffc02800 +#define SOCFPGA_I2C1_ADDRESS 0xffc02900 +#define SOCFPGA_I2C2_ADDRESS 0xffc02a00 +#define SOCFPGA_I2C3_ADDRESS 0xffc02b00 +#define SOCFPGA_I2C4_ADDRESS 0xffc02c00 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_GPIO0_ADDRESS 0xffc03200 +#define SOCFPGA_GPIO1_ADDRESS 0xffc03300 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00500 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_SPIS0_ADDRESS 0xffda2000 +#define SOCFPGA_SPIS1_ADDRESS 0xffda3000 +#define SOCFPGA_SPIM0_ADDRESS 0xffda4000 +#define SOCFPGA_SPIM1_ADDRESS 0xffda5000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000
+#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */
On 08/04/2016 05:08 PM, Chin Liang See wrote:
Hi Marek,
Hi,
On Thu, 2016-08-04 at 07:34 +0200, Marek Vasut wrote:
On 08/03/2016 05:17 PM, Chin Liang See wrote:
Add base address header file for Stratix10 SoC
Signed-off-by: Chin Liang See clsee@altera.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Ley Foon Tan lftan@altera.com
Applied to the 01-arria10 branch , since this patch is useless in mainline as-is .
Cool and thanks. This is the patch for S10 SOCVP and I am validating my development code now.
Can we split this as another branch? Once its working with S10 SOCVP, this shall be part of mainline.
I can put it into stratix branch, but I don't want to add it into mainline as it's dead code for now.
btw do you ever plan to finish the Arria10 support in mainline ?
Definitely and getting Ley Foon's help for this.
Cool.
btw is anyone from Altera (now part of Intel :)) going to ELCE ?
Thanks Chin Liang
arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100755 arch/arm/mach -socfpga/include/mach/base_addr_s10.h
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h new file mode 100755 index 0000000..411518d --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h @@ -0,0 +1,48 @@ +/*
- Copyright (C) 2016, Intel Corporation
- SPDX-License-Identifier: GPL-2.0
- */
+#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_ +#define _SOCFPGA_S10_BASE_HARDWARE_H_
+#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_EMAC0_ADDRESS 0xff800000 +#define SOCFPGA_EMAC1_ADDRESS 0xff802000 +#define SOCFPGA_EMAC2_ADDRESS 0xff804000 +#define SOCFPGA_SDMMC_ADDRESS 0xff808000 +#define SOCFPGA_USB0_ADDRESS 0xffb00000 +#define SOCFPGA_USB1_ADDRESS 0xffb40000 +#define SOCFPGA_NANDREGS_ADDRESS 0xffb80000 +#define SOCFPGA_NANDDATA_ADDRESS 0xffb90000 +#define SOCFPGA_UART0_ADDRESS 0xffc02000 +#define SOCFPGA_UART1_ADDRESS 0xffc02100 +#define SOCFPGA_I2C0_ADDRESS 0xffc02800 +#define SOCFPGA_I2C1_ADDRESS 0xffc02900 +#define SOCFPGA_I2C2_ADDRESS 0xffc02a00 +#define SOCFPGA_I2C3_ADDRESS 0xffc02b00 +#define SOCFPGA_I2C4_ADDRESS 0xffc02c00 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_GPIO0_ADDRESS 0xffc03200 +#define SOCFPGA_GPIO1_ADDRESS 0xffc03300 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00200 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00300 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00400 +#define SOCFPGA_L4WD0_ADDRESS 0xffd00500 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd10000 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd11000 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd12000 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_SPIS0_ADDRESS 0xffda2000 +#define SOCFPGA_SPIS1_ADDRESS 0xffda3000 +#define SOCFPGA_SPIM0_ADDRESS 0xffda4000 +#define SOCFPGA_SPIM1_ADDRESS 0xffda5000 +#define SOCFPGA_OCRAM_ADDRESS 0xffe00000
+#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */
On Thu, 2016-08-04 at 17:27 +0200, Marek Vasut wrote:
On 08/04/2016 05:08 PM, Chin Liang See wrote:
Hi Marek,
Hi,
On Thu, 2016-08-04 at 07:34 +0200, Marek Vasut wrote:
On 08/03/2016 05:17 PM, Chin Liang See wrote:
Add base address header file for Stratix10 SoC
Signed-off-by: Chin Liang See clsee@altera.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Ley Foon Tan lftan@altera.com
Applied to the 01-arria10 branch , since this patch is useless in mainline as-is .
Cool and thanks. This is the patch for S10 SOCVP and I am validating my development code now.
Can we split this as another branch? Once its working with S10 SOCVP, this shall be part of mainline.
I can put it into stratix branch, but I don't want to add it into mainline as it's dead code for now.
Cool and yah, we shall do it once its running on SOCVP. Let us know if you wish to play with it too.
btw do you ever plan to finish the Arria10 support in mainline ?
Definitely and getting Ley Foon's help for this.
Cool.
btw is anyone from Altera (now part of Intel :)) going to ELCE ?
Haha.. u are familiar with the tagline :) While ELCE, not for me. Maybe for Dinh?
Thanks Chin Liang
Thanks Chin Liang
arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 48 ++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100755 arch/arm/mach -socfpga/include/mach/base_addr_s10.h
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_s10.h b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h new file mode 100755 index 0000000..411518d --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/base_addr_s10.h @@ -0,0 +1,48 @@ +/*
- Copyright (C) 2016, Intel Corporation
- SPDX-License-Identifier: GPL-2.0
- */
+#ifndef _SOCFPGA_S10_BASE_HARDWARE_H_ +#define _SOCFPGA_S10_BASE_HARDWARE_H_
+#define SOCFPGA_SMMU_ADDRESS 0xfa000000 +#define SOCFPGA_EMAC0_ADDRESS 0xff80000 0 +#define SOCFPGA_EMAC1_ADDRESS 0xff80200 0 +#define SOCFPGA_EMAC2_ADDRESS 0xff80400 0 +#define SOCFPGA_SDMMC_ADDRESS 0xff80800 0 +#define SOCFPGA_USB0_ADDRESS 0xffb00000 +#define SOCFPGA_USB1_ADDRESS 0xffb40000 +#define SOCFPGA_NANDREGS_ADDRESS 0xffb80000 +#define SOCFPGA_NANDDATA_ADDRESS 0xffb90000 +#define SOCFPGA_UART0_ADDRESS 0xffc0200 0 +#define SOCFPGA_UART1_ADDRESS 0xffc0210 0 +#define SOCFPGA_I2C0_ADDRESS 0xffc02800 +#define SOCFPGA_I2C1_ADDRESS 0xffc02900 +#define SOCFPGA_I2C2_ADDRESS 0xffc02a00 +#define SOCFPGA_I2C3_ADDRESS 0xffc02b00 +#define SOCFPGA_I2C4_ADDRESS 0xffc02c00 +#define SOCFPGA_SPTIMER0_ADDRESS 0xffc03000 +#define SOCFPGA_SPTIMER1_ADDRESS 0xffc03100 +#define SOCFPGA_GPIO0_ADDRESS 0xffc0320 0 +#define SOCFPGA_GPIO1_ADDRESS 0xffc0330 0 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00000 +#define SOCFPGA_SYSTIMER0_ADDRESS 0xffd00100 +#define SOCFPGA_L4WD0_ADDRESS 0xffd0020 0 +#define SOCFPGA_L4WD0_ADDRESS 0xffd0030 0 +#define SOCFPGA_L4WD0_ADDRESS 0xffd0040 0 +#define SOCFPGA_L4WD0_ADDRESS 0xffd0050 0 +#define SOCFPGA_CLKMGR_ADDRESS 0xffd100 00 +#define SOCFPGA_RSTMGR_ADDRESS 0xffd110 00 +#define SOCFPGA_SYSMGR_ADDRESS 0xffd120 00 +#define SOCFPGA_PINMUX_DEDICATED_IO_ADDRESS 0xffd13000 +#define SOCFPGA_DMANONSECURE_ADDRESS 0xffda0000 +#define SOCFPGA_DMASECURE_ADDRESS 0xffda1000 +#define SOCFPGA_SPIS0_ADDRESS 0xffda200 0 +#define SOCFPGA_SPIS1_ADDRESS 0xffda300 0 +#define SOCFPGA_SPIM0_ADDRESS 0xffda400 0 +#define SOCFPGA_SPIM1_ADDRESS 0xffda500 0 +#define SOCFPGA_OCRAM_ADDRESS 0xffe0000 0
+#endif /* _SOCFPGA_S10_BASE_HARDWARE_H_ */
On 08/04/2016 05:32 PM, Chin Liang See wrote:
On Thu, 2016-08-04 at 17:27 +0200, Marek Vasut wrote:
On 08/04/2016 05:08 PM, Chin Liang See wrote:
Hi Marek,
Hi,
On Thu, 2016-08-04 at 07:34 +0200, Marek Vasut wrote:
On 08/03/2016 05:17 PM, Chin Liang See wrote:
Add base address header file for Stratix10 SoC
Signed-off-by: Chin Liang See clsee@altera.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Ley Foon Tan lftan@altera.com
Applied to the 01-arria10 branch , since this patch is useless in mainline as-is .
Cool and thanks. This is the patch for S10 SOCVP and I am validating my development code now.
Can we split this as another branch? Once its working with S10 SOCVP, this shall be part of mainline.
I can put it into stratix branch, but I don't want to add it into mainline as it's dead code for now.
Cool and yah, we shall do it once its running on SOCVP. Let us know if you wish to play with it too.
I have enough stuff to play with for now, is the SoCVP documented somewhere already in case I got bored ?
btw do you ever plan to finish the Arria10 support in mainline ?
Definitely and getting Ley Foon's help for this.
Cool.
btw is anyone from Altera (now part of Intel :)) going to ELCE ?
Haha.. u are familiar with the tagline :) While ELCE, not for me.
That sucks. What about Ley ?
Maybe for Dinh?
I hope so :)
On Thu, 2016-08-04 at 17:50 +0200, Marek Vasut wrote:
On 08/04/2016 05:32 PM, Chin Liang See wrote:
On Thu, 2016-08-04 at 17:27 +0200, Marek Vasut wrote:
On 08/04/2016 05:08 PM, Chin Liang See wrote:
Hi Marek,
Hi,
On Thu, 2016-08-04 at 07:34 +0200, Marek Vasut wrote:
On 08/03/2016 05:17 PM, Chin Liang See wrote:
Add base address header file for Stratix10 SoC
Signed-off-by: Chin Liang See clsee@altera.com Cc: Marek Vasut marex@denx.de Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Ley Foon Tan lftan@altera.com
Applied to the 01-arria10 branch , since this patch is useless in mainline as-is .
Cool and thanks. This is the patch for S10 SOCVP and I am validating my development code now.
Can we split this as another branch? Once its working with S10 SOCVP, this shall be part of mainline.
I can put it into stratix branch, but I don't want to add it into mainline as it's dead code for now.
Cool and yah, we shall do it once its running on SOCVP. Let us know if you wish to play with it too.
I have enough stuff to play with for now, is the SoCVP documented somewhere already in case I got bored ?
A good source of reference is located at https://www.altera.com/en_US/pdfs/literature/ug/ug-s10-vp.pdf
Have fun :) Chin Liang
On 08/07/2016 03:59 PM, Chin Liang See wrote:
On Thu, 2016-08-04 at 17:50 +0200, Marek Vasut wrote:
On 08/04/2016 05:32 PM, Chin Liang See wrote:
On Thu, 2016-08-04 at 17:27 +0200, Marek Vasut wrote:
On 08/04/2016 05:08 PM, Chin Liang See wrote:
Hi Marek,
Hi,
On Thu, 2016-08-04 at 07:34 +0200, Marek Vasut wrote:
On 08/03/2016 05:17 PM, Chin Liang See wrote: > Add base address header file for Stratix10 SoC > > Signed-off-by: Chin Liang See clsee@altera.com > Cc: Marek Vasut marex@denx.de > Cc: Dinh Nguyen dinguyen@opensource.altera.com > Cc: Ley Foon Tan lftan@altera.com
Applied to the 01-arria10 branch , since this patch is useless in mainline as-is .
Cool and thanks. This is the patch for S10 SOCVP and I am validating my development code now.
Can we split this as another branch? Once its working with S10 SOCVP, this shall be part of mainline.
I can put it into stratix branch, but I don't want to add it into mainline as it's dead code for now.
Cool and yah, we shall do it once its running on SOCVP. Let us know if you wish to play with it too.
I have enough stuff to play with for now, is the SoCVP documented somewhere already in case I got bored ?
A good source of reference is located at https://www.altera.com/en_US/pdfs/literature/ug/ug-s10-vp.pdf
Thanks. The whole text looks like it requires windows (?) to run the executables (.exe) files and also shell (to run the .sh files). Oh dear. It seems the software is also pretty up to date, 2014 was a good year :)
participants (2)
-
Chin Liang See -
Marek Vasut