[U-Boot-Users] RAM version of U-Boot
Hi All,
I am pretty new to U-boot and the embedded world too. I have a kit with an ARM 926EJ-S based processor and Micromonitor as the boot loader. But we are facing some problems with Micromonitor. So we would like to change it. U-boot seems be a very good option. But I would like to test out my applications on U-boot before I burn it on to the flash. So can U-boot be made as an application ?? So that I can load it into RAM and then run my application without loosing Micromonitor??
Thanks a lot, Midhun Agnihotram.
In message 4dde4acb0705281018g4224a1at1b88e045b77cc33c@mail.gmail.com you wrote:
I am pretty new to U-boot and the embedded world too. I have a kit with an ARM 926EJ-S based processor and Micromonitor as the boot loader. But we are facing some problems with Micromonitor. So we would like to change it. U-boot seems be a very good option. But I would like to test out my applications on U-boot before I burn it on to the flash. So can U-boot be made as an application ?? So that I can load it into RAM and then run my application without loosing Micromonitor??
You may want to start by reading the documentation, especially the FAQ. See especially http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStarted...
------=_Part_158329_1352075.1180372687037 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
And never post HTML on this list.
Wolfgang Denk
participants (2)
-
Midhun Agnihotram -
Wolfgang Denk