[U-Boot-Users] CUSTODIANS: List of open issues / not applied patches
Hello everybody,
this is a heads-up especially for all custodians...
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
If possible, please apply and send pull requests ASAP! Thanks.
[It would be helpful to me if you could include my private message ID (the number in column 1) when referring to one of these postings; thanks.]
9799 09/18 urwithsughosh@gma Re: [U-Boot-Users] [PATCH]: Reset issue fix on mpc85xx 9804 09/18 Jason Jin [PATCH] fsl_pci_init Fix command register initialization issue. 9952 09/24 Anatolij Gustschi [U-Boot-Users] [PATCH] Add Fujitsu CoralP/Lime video driver 9967 09/24 Troy Kisky Re: [U-Boot-Users] PATCH - Fix oob data copied into supplied buffer 9969 09/25 Shinya Kuribayash Re: [U-Boot-Users] [MIPS] Make mips_io_port_base more generic 10068 09/28 Vasiliy Leoenenko [PATCH] M18 flash (Sibley) support (attempt 2) 10078 09/28 Dan Wilson [U-Boot-Users] [PATCH] tsec.c patch for receiver reset 10081 09/29 Shinya Kuribayash [MIPS] Make mips_io_port_base more generic 10159 10/04 Vlad Lungu [U-Boot-Users] [PATCH] Target support for qemu -M mips 10281 10/10 Vlad Lungu [PATCH] Fixed pcnet io_base 10282 10/10 Vlad Lungu [PATCH] Added Am79C970A chip id to pcnet 10397 10/12 Tony Li [U-Boot-Users] [PATCH] mpc83xx: Add ATM makefile entry for MPC8360EM 10676 10/22 Anton Vorontsov [U-Boot-Users] [PATCH] MPC8568E-MDS: reset UCCs to use them reliably 10686 10/23 Shinya Kuribayash Re: [U-Boot-Users] [PATCH 1/1] Fix mips_io_port_base multiple declar 10690 10/22 Anton Vorontsov [U-Boot-Users] [PATCH] MPC8568E-MDS: set up QE pario for UART1 10810 10/25 Johannes Stezenba [U-Boot-Users] [patch 0/3] KB9202 CodeSourcery ARM EABI toolchain bu 11193 11/07 llandre [U-Boot-Users] [PATCH] ARM optimized memcpy/memmove routines 11230 11/09 "Martin Krause" RE: [U-Boot-Users] [PATCH] TQM5200B: update MTD partition layout 11473 11/19 Matthias Fuchs Re: [U-Boot-Users] flash hardware protection with CFI driver does no 11522 11/20 stefano babic [U-Boot-Users] [PATCH] Fix gcc issues in pxa-regs.h 11523 11/20 stefano babic [U-Boot-Users] [PATCH] MMC for PXA 27X (resubmit) 11635 11/23 sivaji [U-Boot-Users] MPC8548 problem in Boot Sequencer mode 11911 12/01 Daniel Mack Re: [U-Boot-Users] [PATCH] add support for Toradex Colibri module 11928 12/03 Yoshihiro Shimoda [PATCH] serial_sh: Add support for SH7720 11929 12/03 Yoshihiro Shimoda [PATCH] sh: Add support SH3 and SH7720 11930 12/03 Yoshihiro Shimoda [PATCH] Add support for MS7720RP02 board 12002 12/06 Ladislav Michl [U-Boot-Users] [PATCH] ARM: Fix at91rm9200dk base address 12003 12/06 Ladislav Michl [U-Boot-Users] [PATCH] ARM: AT91RM9200 based boards config cleanup 12007 12/07 Ladislav Michl [U-Boot-Users] [PATCH] ARM: Board voiceblue update 12044 12/08 Jean-Christophe P Re: [U-Boot-Users] PATCH: add support for MII-connected ethernet swi 12046 12/08 Jean-Christophe P Re: [U-Boot-Users] PATCH: ixp42x UART: support 230400bps, enable RTS 12057 12/09 Jean-Christophe P Re: [U-Boot-Users] PATCH: add support for MII-connected ethernet swi 12096 12/10 Jean-Christophe P [U-Boot-Users] [PATCH] bf537-stamp: remove already defined is_zero_e 12257 12/13 Jean-Christophe P [U-Boot-Users] [PATCH] Nios2: remove common/cmd_bdinfo.c unused vari 12382 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM926: compile cpu_init_crit function on 12383 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM926: Remove compiler warning: target C 12384 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM: I2C Init function call in lib_arm/bo 12385 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM926: Display Ethernet info in do_bdinf 12390 12/19 Kumar Gala [U-Boot-Users] [PATCH] Reworked FSL Book-E TLB macros to be more rea 12392 12/19 Joakim Tjernlund Re: [U-Boot-Users] 83xx, FSL_UEC reducing boot latency, printf causi 12393 12/19 Stefan Roese [U-Boot-Users] fdt chosen node handling 12394 12/19 Joakim Tjernlund Re: [U-Boot-Users] 83xx, FSL_UEC reducing boot latency, printf causi 12395 12/19 "Gururaja Hebbar Re: [U-Boot-Users] [PATCH] ARM926: compile cpu_init_crit function on 12396 12/19 Dirk Behme Re: [U-Boot-Users] [PATCH] ARM926: compile cpu_init_crit function on 12404 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: arm920/s3c24xx: IRQ demulitplexer callba 12405 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: arm920t: Allow use of 'gd' pointer from 12408 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: s3c24xx: Multiple serial port support 12412 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: S3C24x0 SoC NAND controller support 12510 12/22 Jean-Christophe P [U-Boot-Users] [PATCH 1/1] qemu-mips: active HUSH PARSER, AUTO_COMPL 12548 12/25 Anton Vorontsov [U-Boot-Users] [PATCH] mpc83xx: UEC: add support for Broadcom BCM548 12549 12/25 Anton Vorontsov [U-Boot-Users] [PATCH] mpc83xx: add support for the MPC8360E-RDK 12602 12/27 Wolfgang Denk [U-Boot-Users] [PATCH] OMAP5912: fix FIFO handling in UART driver 12818 01/04 Jon Loeliger [U-Boot-Users] [PATCH] Convert MPC8610HPCD to use libfdt. 12820 01/04 Timur Tabi Re: [U-Boot-Users] [PATCH] 8610: Fix lingering compile warnings. 12859 01/07 Timur Tabi [U-Boot-Users] [PATCH v2] 85xx: add ability to upload QE firmware 12866 01/07 Kumar Gala Re: [U-Boot-Users] [PATCH] MPC85xx KGDB support 12870 01/08 Kumar Gala [U-Boot-Users] [PATCH] 85xx: Remove cache config from configs.h 12934 01/08 Ben Warren [U-Boot-Users] [PATCH] Fix Ethernet init() return codes 12938 01/08 Ben Warren [U-Boot-Users] [PATCH V2] Fix Ethernet init() return codes.
Best regards,
Wolfgang Denk
Wolfgang Denk wrote:
12820 01/04 Timur Tabi Re: [U-Boot-Users] [PATCH] 8610: Fix lingering compile warnings.
This is just a comment to a patch from Jon.
12859 01/07 Timur Tabi [U-Boot-Users] [PATCH v2] 85xx: add ability to upload QE firmware
Andy sent a pull request earlier today to pick up this patch.
Wolfgang Denk wrote:
Hello everybody,
this is a heads-up especially for all custodians...
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
If possible, please apply and send pull requests ASAP! Thanks.
[It would be helpful to me if you could include my private message ID (the number in column 1) when referring to one of these postings; thanks.]
12393 12/19 Stefan Roese [U-Boot-Users] fdt chosen node handling
This was discussion email, culminating in my patch "[PATCH] Fine grained per property /chosen updating." which has been applied. http://article.gmane.org/gmane.comp.boot-loaders.u-boot/34563/
Thanks, gvb
On Jan 9, 2008 3:36 PM, Wolfgang Denk wd@denx.de wrote:
9799 09/18 urwithsughosh@gma Re: [U-Boot-Users] [PATCH]: Reset issue fix on mpc85xx
A version of this patch is already committed: df90968b48fb34fa9072fab150db2ac89678f537
9804 09/18 Jason Jin [PATCH] fsl_pci_init Fix command register initialization issue.
10078 09/28 Dan Wilson [U-Boot-Users] [PATCH] tsec.c patch for receiver reset
This one was commited: 5c7ea64bb74a850a2b2303f853a8270695ad8602
10676 10/22 Anton Vorontsov [U-Boot-Users] [PATCH] MPC8568E-MDS: reset UCCs to use them reliably 10690 10/22 Anton Vorontsov [U-Boot-Users] [PATCH] MPC8568E-MDS: set up QE pario for UART1
These two are in the current pull request
11635 11/23 sivaji [U-Boot-Users] MPC8548 problem in Boot Sequencer mode
This isn't a patch, but I am tracking the issue. :)
12390 12/19 Kumar Gala [U-Boot-Users] [PATCH] Reworked FSL Book-E TLB macros to be more rea
This is in the current pull request
12859 01/07 Timur Tabi [U-Boot-Users] [PATCH v2] 85xx: add ability to upload QE firmware
In the current pull request
12866 01/07 Kumar Gala Re: [U-Boot-Users] [PATCH] MPC85xx KGDB support
This one has some outstanding issues, so unless I hear something from the author (not Kumar, but I don't have the name in front of me at the moment), it won't go into the next release.
12870 01/08 Kumar Gala [U-Boot-Users] [PATCH] 85xx: Remove cache config from configs.h
In the current pull request
Oh, and sorry about top-posting and over-quoting. I can only guess it was because I was tired. :)
I have rebased my tree, and will send another pull request soon.
Andy
On Wednesday 09 January 2008 22:36, Wolfgang Denk wrote:
11473 11/19 Matthias Fuchs Re: [U-Boot-Users] flash hardware protection with CFI driver does no
This issue did not made it into any patch. We discussed it and ended up with an idea how to add a config option to allow board specific protected flash ranges.
Because I have an open issue on this I will try to provide a patch 'til the end of this week.
Wolfgang, thanks for the reminder.
Matthias
On Wed, 09 Jan 2008 22:36:14 +0100 Wolfgang Denk wd@denx.de wrote:
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
I can't see this one anywhere:
[PATCH] Conditionally add -fno-stack-protector to CFLAGS http://groups.google.com.mx/group/osdeve_mirror_boot-loaders_u-boot/browse_t...
It doesn't matter all that much to me, but I get lots of build errors on powerpc without it. Other arches may be affected too.
Haavard
On 22:36 Wed 09 Jan , Wolfgang Denk wrote:
Hello everybody,
this is a heads-up especially for all custodians...
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
If possible, please apply and send pull requests ASAP! Thanks.
[It would be helpful to me if you could include my private message ID (the number in column 1) when referring to one of these postings; thanks.]
12046 12/08 Jean-Christophe P Re: [U-Boot-Users] PATCH: ixp42x UART: support 230400bps, enable RTS
Replace by IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x and already in the tree as commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
Wolfgang Denk wrote:
Hello everybody,
this is a heads-up especially for all custodians...
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
If possible, please apply and send pull requests ASAP! Thanks.
[It would be helpful to me if you could include my private message ID (the number in column 1) when referring to one of these postings; thanks.]
<snip>
10078 09/28 Dan Wilson [U-Boot-Users] [PATCH] tsec.c patch for receiver reset
Looks like Andy already applied this one: http://article.gmane.org/gmane.comp.boot-loaders.u-boot/32643
12044 12/08 Jean-Christophe P Re: [U-Boot-Users] PATCH: add support for MII-connected ethernet swi
12057 12/09 Jean-Christophe P Re: [U-Boot-Users] PATCH: add support for MII-connected ethernet swi
These are both responses to a patch submitted by Michael Schwingen. A revised patch was never submitted that I know of.
12096 12/10 Jean-Christophe P [U-Boot-Users] [PATCH] bf537-stamp: remove already defined is_zero_e
I'll pull this one in.
12548 12/25 Anton Vorontsov [U-Boot-Users] [PATCH] mpc83xx: UEC: add support for Broadcom BCM548
I've asked Anton for changes to this one
12934 01/08 Ben Warren [U-Boot-Users] [PATCH] Fix Ethernet init() return codes 12938 01/08 Ben Warren [U-Boot-Users] [PATCH V2] Fix Ethernet init() return codes.
You've pulled this in. Sorry for being Captain Obvious.
regards, Ben
On Wed, 09 Jan 2008 22:36:14 +0100 Wolfgang Denk wd@denx.de wrote:
10397 10/12 Tony Li [U-Boot-Users] [PATCH] mpc83xx: Add ATM makefile entry for MPC8360EM
this is already in your mainline tree (commit 281df457c1aa50d2752165d0c5c3282d4027b974).
12392 12/19 Joakim Tjernlund Re: [U-Boot-Users] 83xx, FSL_UEC reducing boot latency, printf causi
this was never intended to be a final patch; we're still working out the issues.
12394 12/19 Joakim Tjernlund Re: [U-Boot-Users] 83xx, FSL_UEC reducing boot latency, printf causi
same as above. I'll try and get back to it before the Jan. 17 deadline.
12548 12/25 Anton Vorontsov [U-Boot-Users] [PATCH] mpc83xx: UEC: add support for Broadcom BCM548
Ben Warren is handling the newer version of this one (and it looks like Anton will resubmit it again).
12549 12/25 Anton Vorontsov [U-Boot-Users] [PATCH] mpc83xx: add support for the MPC8360E-RDK
I'm about to ask you to pull the newer version of this.
so, assuming you pull on my next request, the above can be removed from your list.
Kim
u-boot-users-bounces@lists.sourceforge.net wrote on :
Hello everybody,
this is a heads-up especially for all custodians...
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
If possible, please apply and send pull requests ASAP! Thanks.
[It would be helpful to me if you could include my private message ID (the number in column 1) when referring to one of these postings; thanks.]
11230 11/09 "Martin Krause" RE: [U-Boot-Users] [PATCH] TQM5200B: update MTD partition layout
After the first version of the patch was NAKed, I reveived no (positiv) answer to my then proposed alternative flash layout and the offer to submit a new patch. So I assumed the patch will also not be accepted and did no further work on this.
Best regards, Martin Krause
(resend due to mailserver problems)
On Wed, Jan 09, 2008 at 10:36:14PM +0100, Wolfgang Denk wrote:
Hello everybody,
this is a heads-up especially for all custodians...
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
Not sure about the source of the problem, but the CONFIG_CFI_FLASH_LEGACY support seems to be broken - the code for flash_read_jedec_ids_intel and flash_read_jedec_ids_amd which are called in cfi_flash.c seems to be missing. I do not see any missing/outstanding patches that seem relevant to this problem.
Am I looking at the wrong branch?
cu Michael
Hi Michael,
On Friday 11 January 2008, Michael Schwingen wrote:
this is a heads-up especially for all custodians...
Please review the following list of postings / patches that - to the best of my knowledge - habve not been processed yet; at least I did not mark them as rejected, nor did I find them in the current U-Boot tree.
Not sure about the source of the problem, but the CONFIG_CFI_FLASH_LEGACY support seems to be broken - the code for flash_read_jedec_ids_intel and flash_read_jedec_ids_amd which are called in cfi_flash.c seems to be missing. I do not see any missing/outstanding patches that seem relevant to this problem.
Am I looking at the wrong branch?
No. You CFI/JEDEC rework should be available in the official repository right now. Could be that something slipped though. Best would be if you would provide a patch that adds the missing JEDEC stuff.
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================
On Sat, Jan 12, 2008 at 07:27:49AM +0100, Stefan Roese wrote:
No. You CFI/JEDEC rework should be available in the official repository right now. Could be that something slipped though. Best would be if you would provide a patch that adds the missing JEDEC stuff.
Okay - after a closer look, just a small change is required.
Signed-off-by: Michael Schwingen michael@schwingen.org
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 4f61e36..3a3439c 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1446,11 +1446,11 @@ static void flash_read_jedec_ids (flash_info_t * info) switch (info->vendor) { case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED: - flash_read_jedec_ids_intel(info); + cmdset_amd_read_jedec_ids(info); break; case CFI_CMDSET_AMD_STANDARD: case CFI_CMDSET_AMD_EXTENDED: - flash_read_jedec_ids_amd(info); + cmdset_intel_read_jedec_ids(info); break; default: break;
In message 20080112134301.GA6978@discworld.dascon.de you wrote:
On Sat, Jan 12, 2008 at 07:27:49AM +0100, Stefan Roese wrote:
No. You CFI/JEDEC rework should be available in the official repository right now. Could be that something slipped though. Best would be if you would provide a patch that adds the missing JEDEC stuff.
Okay - after a closer look, just a small change is required.
Hm... either you got the patch inverse, or something is seriously broken:
case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED:
flash_read_jedec_ids_intel(info);
cmdset_amd_read_jedec_ids(info);
For INTEL flashes use the AMD command set, and ...
case CFI_CMDSET_AMD_STANDARD: case CFI_CMDSET_AMD_EXTENDED:
flash_read_jedec_ids_amd(info);
cmdset_intel_read_jedec_ids(info);
...for AMD flashes use the INTEL command set?
This makes no sense to me.
Best regards,
Wolfgang Denk
On Sat, Jan 12, 2008 at 07:48:26PM +0100, Wolfgang Denk wrote:
Hm... either you got the patch inverse, or something is seriously broken:
I vote for the second option - don't know what got into me. The strange thing is that it worked, nevertheless ...
cu Michael
Signed-off-by: Michael Schwingen michael@schwingen.org
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 4f61e36..eb509f5 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1446,11 +1446,11 @@ static void flash_read_jedec_ids (flash_info_t * info) switch (info->vendor) { case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED: - flash_read_jedec_ids_intel(info); + cmdset_intel_read_jedec_ids(info); break; case CFI_CMDSET_AMD_STANDARD: case CFI_CMDSET_AMD_EXTENDED: - flash_read_jedec_ids_amd(info); + cmdset_amd_read_jedec_ids(info); break; default: break;
On Saturday 12 January 2008, Michael Schwingen wrote:
On Sat, Jan 12, 2008 at 07:48:26PM +0100, Wolfgang Denk wrote:
Hm... either you got the patch inverse, or something is seriously broken:
I vote for the second option - don't know what got into me. The strange thing is that it worked, nevertheless ...
cu Michael
Signed-off-by: Michael Schwingen michael@schwingen.org
Thanks. Applied to cfi-flash repository.
Pull request will follow soon.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================
On Fri, 11 Jan 2008 22:06:30 +0100 rincewind@discworld.dascon.de (Michael Schwingen) wrote:
Not sure about the source of the problem, but the CONFIG_CFI_FLASH_LEGACY support seems to be broken - the code for flash_read_jedec_ids_intel and flash_read_jedec_ids_amd which are called in cfi_flash.c seems to be missing. I do not see any missing/outstanding patches that seem relevant to this problem.
Hmm...I guess my compile tests didn't hit the CONFIG_CFI_FLASH_LEGACY case. Are there any boards that are actually using this in mainline?
Thanks for fixing it.
Haavard
Hi,
Wolfgang Denk wrote:
9969 09/25 Shinya Kuribayash Re: [U-Boot-Users] [MIPS] Make mips_io_port_base more generic 10081 09/29 Shinya Kuribayash [MIPS] Make mips_io_port_base more generic 10686 10/23 Shinya Kuribayash Re: [U-Boot-Users] [PATCH 1/1] Fix mips_io_port_base multiple declar
these are already in v1.3.0. Please drop them from your list.
10159 10/04 Vlad Lungu [U-Boot-Users] [PATCH] Target support for qemu -M mips 12510 12/22 Jean-Christophe P [U-Boot-Users] [PATCH 1/1] qemu-mips: active HUSH PARSER, AUTO_COMPL
I don't feel no need to be in a rush to these stuffs. And they needs some possible cleanups, a MAINTAINER file entry, and so on. With these changes, I'll pull request in the future.
Shinya
Shinya Kuribayashi wrote:
10159 10/04 Vlad Lungu [U-Boot-Users] [PATCH] Target support for qemu -M mips 12510 12/22 Jean-Christophe P [U-Boot-Users] [PATCH 1/1] qemu-mips: active HUSH PARSER, AUTO_COMPL
I don't feel no need to be in a rush to these stuffs. And they needs some possible cleanups, a MAINTAINER file entry, and so on. With these changes, I'll pull request in the future.
Just saw your comments on JC's patch. Last message in:
http://www.nabble.com/Target-support-for-qemu--M-mips-td14375017.html
Can you please be more specific about the issues you have with my patch? I haven't seen any negative feedback (or much positive feedback :-] ) on the list or in private e-mail. I'm open to suggestions, as long as I get any ;-)
As for pushing into mainline, I don't want to rush this, but I have sent and re-sent this since end of September. If the next merge window opens in the summer, I'll just give up.
Vlad
Vlad Lungu wrote:
Just saw your comments on JC's patch. Last message in:
http://www.nabble.com/Target-support-for-qemu--M-mips-td14375017.html
Can you please be more specific about the issues you have with my patch? I haven't seen any negative feedback (or much positive feedback :-] ) on the list or in private e-mail. I'm open to suggestions, as long as I get any ;-)
Ok, I'll review the patch. Wait a while.
As for pushing into mainline, I don't want to rush this, but I have sent and re-sent this since end of September. If the next merge window opens in the summer, I'll just give up.
So I have to push this now :-)
Shinya
Shinya Kuribayashi wrote:
Vlad Lungu wrote:
Just saw your comments on JC's patch. Last message in:
http://www.nabble.com/Target-support-for-qemu--M-mips-td14375017.html
Can you please be more specific about the issues you have with my patch? I haven't seen any negative feedback (or much positive feedback :-] ) on the list or in private e-mail. I'm open to suggestions, as long as I get any ;-)
Ok, I'll review the patch. Wait a while.
OK.
As for pushing into mainline, I don't want to rush this, but I have sent and re-sent this since end of September. If the next merge window opens in the summer, I'll just give up.
So I have to push this now :-)
You don't HAVE to, but it would be nice to consider it.
Vlad
On Wed, 09 Jan 2008 22:36:14 +0100 Wolfgang Denk wd@denx.de wrote:
11928 12/03 Yoshihiro Shimoda [PATCH] serial_sh: Add support for SH7720 11929 12/03 Yoshihiro Shimoda [PATCH] sh: Add support SH3 and SH7720 11930 12/03 Yoshihiro Shimoda [PATCH] Add support for MS7720RP02 board
I picked up and apply these patches. These patches are included in next request-pull.
regards, Nobuhiro
participants (18)
-
Andy Fleming -
Ben Warren -
Haavard Skinnemoen -
Jean-Christophe PLAGNIOL-VILLARD -
Jerry Van Baren -
Kim Phillips -
Martin Krause -
Matthias Fuchs -
Michael Schwingen -
Michael Schwingen -
Nobuhiro Iwamatsu -
rincewind＠discworld.dascon.de
-
Scott McNutt -
Shinya Kuribayashi -
Stefan Roese -
Timur Tabi -
Vlad Lungu -
Wolfgang Denk