Hi, Thanks a lot. I tried the same but it still gives me the same error. These are the one that gets displayed.

## Booting image at 00200000 ... Image Name: Linux-2.6.21 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1311814 Bytes = 1.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 01000000 ... Image Name: Rootfs Test Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 5046516 Bytes = 4.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 0522f000, end 056ff0f4 ... OK [ 0.000000] Linux version 2.6.21 (root@cheuxeri002) (gcc version 4.1.2 (Wind River Linux Sourcery G++ 4.1-91)) #21 PREEMPT Tue Aug 18 12:9 [ 0.000000] AMCC PowerPC 440EP Yosemite Platform [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 32768 [ 0.000000] Normal 32768 -> 32768 [ 0.000000] HighMem 32768 -> 32768 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 32768 [ 0.000000] Built 1 zonelists. Total pages: 32512 [ 0.000000] Kernel command line: mem=128M console=ttyS0,115200 root=/dev/ram rw init=/sbin/linuxrc panic=3 loglevel=7 [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes) [ 0.000076] Console: colour dummy device 80x25 [ 0.068076] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.075516] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.094408] Memory: 121756k available (1936k kernel code, 1044k data, 108k init, 0k highmem) [ 0.192156] Mount-cache hash table entries: 512 [ 0.198250] NET: Registered protocol family 16 [ 0.208218] PCI: Probing PCI hardware [ 0.222329] NET: Registered protocol family 2 [ 0.252127] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.259225] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.266431] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.272964] TCP: Hash tables configured (established 4096 bind 4096) [ 0.279324] TCP reno registered [ 0.292438] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd [ 1.770630] Freeing initrd memory: 4928k freed [ 1.777422] io scheduler noop registered [ 1.781425] io scheduler cfq registered (default) [ 2.071072] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 2.079365] serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A [ 2.086089] serial8250: ttyS1 at MMIO 0x0 (irq = 1) is a 16550A [ 2.092844] serial8250: ttyS2 at MMIO 0x0 (irq = 3) is a 16550A [ 2.099560] serial8250: ttyS3 at MMIO 0x0 (irq = 4) is a 16550A [ 2.112918] RAMDISK driver initialized: 16 RAM disks of 60000K size 1024 blocksize [ 2.123495] loop: loaded (max 8 devices) [ 2.127779] nbd: registered device at major 43 [ 2.139752] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 [ 2.145851] Copyright (c) 1999-2006 Intel Corporation. [ 2.151342] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI [ 2.157475] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.165232] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 2.173761] tun: Universal TUN/TAP device driver, 1.6 [ 2.178855] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 2.186097] netconsole: not configured, aborting [ 2.191571] i8042.c: No controller found. [ 2.195900] mice: PS/2 mouse device common for all mice [ 2.201261] TCP cubic registered [ 2.204537] NET: Registered protocol family 1 [ 2.208917] NET: Registered protocol family 17 [ 2.213856] RAMDISK: Compressed image found at block 0 [ 4.018906] DEBUG:Going to mount file system [ 4.023591] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [ 4.031412] VFS: Mounted root (ext2 filesystem). [ 4.036073] DEBUG:printing the filesystem name [ 4.040534] DEBUG:Mount root returned [ 4.044299] DEBUG:sys_mount returned [ 4.047887] DEBUG:sys_chroot returned [ 4.051557] DEBUG:security_sb_post_mountroot returned [ 4.056619] DEBUG:FILE SYSTEM mounted [ 4.060290] Freeing unused kernel memory: 108k init [ 4.065242] DEBUG:free_initmem [ 4.068302] DEBUG:unlock_kernel [ 4.071449] DEBUG:mark_rodata_ro [ 4.074692] DEBUG:numa_default_policy [ 4.078661] DEBUG:console opened successfully [ 4.083059] DEBUG:sys_dup executed twice [ 4.086991] DEBUG:value of ramdisk_execute_command <NULL> [ 4.092401] DEBUG:run_init_process [ 4.095808] DEBUG:Value of execute_command /sbin/linuxrc [ 4.101133] DEBUG:run_init_process start [ 4.106288] init has generated signal 11 but has no handler for it [ 4.112525] Kernel panic - not syncing: Attempted to kill init! [ 4.118461] Rebooting in 3 seconds..

My /etc doesnt have this ld.so.cache.

Thanks and Regards Sridhar M

Sridhar M wrote:

Hi, I am trying to bring up a AMCC 440EP yosemite eval board using wind river linux 2.0/I cross compiled busy box 1.4.1 and the kernel . I tried to bring up the board using TFTP.

It loads the kernel and the file system.I get an error message when init is spawned.

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended [ 4.851771] VFS: Mounted root (ext2 filesystem).

[ 4.856547] Freeing unused kernel memory: 120k init [ 4.863038] init has generated signal 11 but has no handler for it

[ 4.869283] Kernel panic - not syncing: Attempted to kill init! [ 4.875221] Rebooting in 3 seconds.

Please help me. Am struck with this for almost 3 days.