The change updates DevKit3250 board powerd by NXP LPC3250 SoC: * due to increased resulting U-boot image size give more space to store loaded and relocated versions, * add DMA support, which is used by NAND SLC driver, * add NXP OHCI and PHY drivers to the image, * add USB, JFFS and FAT commands.

Signed-off-by: Vladimir Zapolskiy vz@mleia.com --- include/configs/devkit3250.h | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index d89e661..99d9148 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -33,7 +33,7 @@ #define CONFIG_SYS_MALLOC_LEN SZ_1M #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_64M -#define CONFIG_SYS_TEXT_BASE 0x83FA0000 +#define CONFIG_SYS_TEXT_BASE 0x83F00000 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_32K) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - SZ_1M)

@@ -49,6 +49,13 @@ #define CONFIG_BAUDRATE 115200

/* + * DMA + */ +#if !defined(CONFIG_SPL_BUILD) +#define CONFIG_DMA_LPC32XX +#endif + +/* * I2C */ #define CONFIG_SYS_I2C @@ -114,9 +121,19 @@ #define CONFIG_SYS_NAND_PAGE_SIZE NAND_LARGE_BLOCK_PAGE_SIZE #define CONFIG_SYS_NAND_USE_FLASH_BBT

+#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND

/* + * USB + */ +#define CONFIG_USB_OHCI_LPC32XX +#define CONFIG_USB_ISP1301_I2C_ADDR 0x2d +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +/* * U-Boot General Configurations */ #define CONFIG_SYS_LONGHELP