Tom,

The following changes since commit 584f316f115df52fd09a6cf699b29dcf824b4da5:

cmd: ide: Make the first device the default one (2017-09-10 12:27:43 -0400)

are available in the git repository at:

git://git.denx.de/u-boot-fsl-qoriq.git

for you to fetch changes up to 42f43aa25876d1c77002ee5f333ab36dcb01d719:

armv8: fsl-layerscape: Add back L3 flushing for all exception levels (2017-09-11 08:02:13 -0700)

---------------------------------------------------------------- Ashish Kumar (6): fsl-layerscape: Consolidate registers space defination for CCI-400 bus armv8: fsl-lsch3: Make CCN-504 related code conditional armv8: ls1088a: Add NXP LS1088A SoC support armv8: ls1088ardb: Add support for LS1088ARDB platform armv8: ls1088aqds: Add support of LS1088AQDS armv8: fsl-layerscape: Support to add RGMII for ls1088aqds

Hou Zhiqiang (3): armv8: ls1088a: fix the MMU table for pcie config space armv8: ls1088a: add PCIe dts node armv8: ls1088a: Enable PCIe in defconfigs

Prabhakar Kushwaha (1): armv8: ls1088aqds: Add support of EC1 and EC2

Priyanka Jain (1): drivers:net:fsl-mc: Update MC address calculation

Ran Wang (10): armv8: fsl: Use correct conditional compile for ls1012a armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32() armv8: Add workaround for USB erratum A-009008 armv8: Add workaround for USB erratum A-009798 armv8: Add workaround for USB erratum A-008997 armv8: Add workaround for USB erratum A-009007 armv7: Add workaround for USB erratum A-009008 armv7: Add workaround for USB erratum A-009798 armv7: Add workaround for USB erratum A-008997 armv7: Add workaround for USB erratum A-009007

Sumit Garg (1): SECURE_BOOT: Unify memory map for Layerscape based platforms

Suresh Gupta (1): armv8: fsl-layerscape: Fix final MMU table for QSPI and IFC

Udit Agarwal (2): LS2080ARDB: QSPI boot: Secure Boot image validation armv8: LS2080ARDB: Add secure boot defconfig for QSPI boot.

York Sun (7): tools: pblimage: Fix address calculation cmd: spl: Fix compiling warning spl: fit: Eanble GZIP support for image decompression spl: fit: Support both external and embedded data spl: fit: Add booting OS first armv8: fsl-layerscape: Fix MC reserved memory calculation armv8: fsl-layerscape: Add back L3 flushing for all exception levels

Zhao Qiang (1): QE: Set QE_IRAM_READY after uploading firmware

README | 13 + arch/arm/Kconfig | 27 + arch/arm/cpu/armv7/ls102xa/Kconfig | 36 ++ arch/arm/cpu/armv7/ls102xa/soc.c | 53 +- arch/arm/cpu/armv8/Kconfig | 1 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 113 +++- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 + arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 20 +- arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 43 +- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +- .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 19 + arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 12 +- arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 126 ++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 122 +++- arch/arm/dts/Makefile | 4 +- arch/arm/dts/fsl-ls1088a-qds.dts | 70 +++ arch/arm/dts/fsl-ls1088a-rdb.dts | 40 ++ arch/arm/dts/fsl-ls1088a.dtsi | 126 ++++ arch/arm/include/asm/arch-fsl-layerscape/config.h | 62 +- arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 10 +- .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 4 +- .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 68 +- .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 34 + arch/arm/include/asm/arch-fsl-layerscape/soc.h | 8 + .../asm/arch-fsl-layerscape/stream_id_lsch3.h | 14 + arch/arm/include/asm/arch-ls102xa/config.h | 1 - arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 64 +- arch/arm/include/asm/fsl_secure_boot.h | 59 +- board/freescale/ls1012afrdm/ls1012afrdm.c | 4 +- board/freescale/ls1012aqds/ls1012aqds.c | 4 +- board/freescale/ls1012ardb/ls1012ardb.c | 3 +- board/freescale/ls1021aqds/ls1021aqds.c | 9 +- board/freescale/ls1088a/Kconfig | 31 + board/freescale/ls1088a/MAINTAINERS | 15 + board/freescale/ls1088a/Makefile | 10 + board/freescale/ls1088a/README | 145 +++++ board/freescale/ls1088a/ddr.c | 102 +++ board/freescale/ls1088a/ddr.h | 49 ++ board/freescale/ls1088a/eth_ls1088aqds.c | 683 +++++++++++++++++++++ board/freescale/ls1088a/eth_ls1088ardb.c | 102 +++ board/freescale/ls1088a/ls1088a.c | 406 ++++++++++++ board/freescale/ls1088a/ls1088a_qixis.h | 39 ++ board/freescale/ls2080aqds/ls2080aqds.c | 7 +- board/freescale/ls2080ardb/MAINTAINERS | 5 + board/freescale/ls2080ardb/ls2080ardb.c | 4 + cmd/spl.c | 8 +- common/spl/spl_fit.c | 144 +++-- configs/ls1088aqds_qspi_defconfig | 33 + configs/ls1088ardb_qspi_defconfig | 33 + configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 48 ++ doc/uImage.FIT/multi_spl.its | 7 + doc/uImage.FIT/source_file_format.txt | 4 + drivers/ddr/fsl/util.c | 2 +- drivers/net/fsl-mc/mc.c | 11 +- drivers/net/ldpaa_eth/Makefile | 1 + drivers/net/ldpaa_eth/ldpaa_wriop.c | 9 + drivers/net/ldpaa_eth/ls1088a.c | 114 ++++ drivers/qe/qe.c | 4 +- include/configs/ls1088a_common.h | 205 +++++++ include/configs/ls1088aqds.h | 414 +++++++++++++ include/configs/ls1088ardb.h | 317 ++++++++++ include/fsl-mc/ldpaa_wriop.h | 2 + include/fsl_immap.h | 51 ++ lib/Kconfig | 12 + lib/Makefile | 5 +- scripts/config_whitelist.txt | 1 - tools/pblimage.c | 2 +- 67 files changed, 3972 insertions(+), 228 deletions(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c create mode 100644 arch/arm/dts/fsl-ls1088a-qds.dts create mode 100644 arch/arm/dts/fsl-ls1088a-rdb.dts create mode 100644 arch/arm/dts/fsl-ls1088a.dtsi create mode 100644 board/freescale/ls1088a/Kconfig create mode 100644 board/freescale/ls1088a/MAINTAINERS create mode 100644 board/freescale/ls1088a/Makefile create mode 100644 board/freescale/ls1088a/README create mode 100644 board/freescale/ls1088a/ddr.c create mode 100644 board/freescale/ls1088a/ddr.h create mode 100644 board/freescale/ls1088a/eth_ls1088aqds.c create mode 100644 board/freescale/ls1088a/eth_ls1088ardb.c create mode 100644 board/freescale/ls1088a/ls1088a.c create mode 100644 board/freescale/ls1088a/ls1088a_qixis.h create mode 100644 configs/ls1088aqds_qspi_defconfig create mode 100644 configs/ls1088ardb_qspi_defconfig create mode 100644 configs/ls2088ardb_qspi_SECURE_BOOT_defconfig create mode 100644 drivers/net/ldpaa_eth/ls1088a.c create mode 100644 include/configs/ls1088a_common.h create mode 100644 include/configs/ls1088aqds.h create mode 100644 include/configs/ls1088ardb.h

Thanks.

York