Hi Hebbar,

to me it looks like, that the HRCW contains something which does not allow accessing the RESET Vector correctly. So, check your HRCW.

Georg

-----Ursprungliche Nachricht----- Von: u-boot-users-admin@lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]Im Auftrag von S. Hebbar Gesendet: Dienstag, 12. August 2003 10:51 An: u-boot-users@lists.sourceforge.net Betreff: [U-Boot-Users] PC going backwards

Hello,

Board: An 8260 based custom board with 64M of RAM. After board reset, the PC (Program Counter) start executing at 0x40000100 but the PC goes backwards. I also tried to trace using BDI "ti 0x40000100" with the same result.

Let me know if you have faced the similar problem.

Thanks, Hebbar.

---

This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users