This patch fixes the appearance of two board files in the Doxygen generated documentation.

Signed-off-by: Juergen Beisert j.beisert@pengutronix.de

--- Documentation/boards.dox | 5 +++++ board/phycore_mcf54xx/phyCore_MCF54xx.dox | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)

Index: u-boot-v2/Documentation/boards.dox =================================================================== --- u-boot-v2.orig/Documentation/boards.dox +++ u-boot-v2/Documentation/boards.dox @@ -21,6 +21,11 @@ Blackfin type:

x86 type:

+coldfire/m68k type: + +- @subpage phycore_mcf54xx +- @subpage kp_ukd_r1 + */

/* TODO Index: u-boot-v2/board/phycore_mcf54xx/phyCore_MCF54xx.dox =================================================================== --- u-boot-v2.orig/board/phycore_mcf54xx/phyCore_MCF54xx.dox +++ u-boot-v2/board/phycore_mcf54xx/phyCore_MCF54xx.dox @@ -1,5 +1,5 @@

-/** @page phycore_mcf54xx Phytec's phyCORE Baseboard +/** @page phycore_mcf54xx Phytec's phyCORE-MCF54x5

This target is based on a PhyTec PhyCore MCF54x5 CPU module. The card is shipped with: