Greetings.

I was curious if anyone had experienced an issue I am having with the ethernets on the Discovery I chip (64260). Essentially, I am bringing up new hardware with U-Boot and I am able to get the ethernets initialized, I can start sending a ping, I see the ARP request go over the wire from my board, I see the ARP reply come back, but my ethernets never get any packets. All I get are a bunch of Rx Resource Errors with no packets received. I should note that a custom and closed source bootloader is already successfully working and booting Linux. I have everything working except for the ethernets. If anyone has some insight, I would be very grateful. I am using a 750 CXe processor with this board. Thanks.

-Steve