Subject: [PATCH] ARM: dts: imx8mm: Update iMX8MM Menlo board configuration

Synchronize Toradex Verdin iMX8MM based MX8Menlo board configuration with Toradex Verdin iMX8MM and enable convenience commands like cat, hexdump, xxd.

Signed-off-by: Marek Vasut marex@denx.de

Reviewed-by: Peng Fan peng.fan@nxp.com

---

Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Fabio Estevam festevam@gmail.com Cc: Francesco Dolcini francesco.dolcini@toradex.com Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Philippe Schenker philippe.schenker@toradex.com Cc: Martyn Welch martyn.welch@collabora.com Cc: Stefano Babic sbabic@denx.de Cc: u-boot@lists.denx.de

---

configs/imx8mm-mx8menlo_defconfig | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm- mx8menlo_defconfig index 1ed7f0a2259..2fbd25491f7 100644 --- a/configs/imx8mm-mx8menlo_defconfig +++ b/configs/imx8mm-mx8menlo_defconfig @@ -22,15 +22,19 @@ CONFIG_SPL_STACK=0x920000 CONFIG_SPL=y CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_ENV_OFFSET_REDUND=0xFFFFDE00 +CONFIG_IMX_BOOTAUX=y CONFIG_SYS_LOAD_ADDR=0x40480000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x80000000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTDELAY=1 CONFIG_OF_SYSTEM_SETUP=y CONFIG_BOOTCOMMAND="mmc partconf 0 distro_bootpart && load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} boot/fitImage && source ${loadaddr}:bootscr-boot.cmd ; reset" +CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="imx8mm-mx8menlo.dtb" CONFIG_SYS_CBSIZE=2048 CONFIG_SYS_PBSIZE=2081 @@ -57,19 +61,26 @@ CONFIG_SYS_PROMPT="Verdin iMX8MM # " # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_CRC32 is not set +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_CAT=y +CONFIG_CMD_XXD=y CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y +CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_BTRFS=y CONFIG_CMD_EXT4_WRITE=y @@ -84,8 +95,9 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FEC" +CONFIG_ETHPRIME="eth0" CONFIG_VERSION_VARIABLE=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 CONFIG_SPL_DM=y @@ -96,16 +108,26 @@ CONFIG_CLK_COMPOSITE_CCF=y CONFIG_SPL_CLK_IMX8MM=y CONFIG_CLK_IMX8MM=y CONFIG_GPIO_HOG=y +CONFIG_SPL_GPIO_HOG=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHYLIB=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_PHY_FIXED=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_SPL_PHY=y @@ -128,6 +150,7 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y CONFIG_USB=y CONFIG_SPL_USB_HOST=y CONFIG_USB_EHCI_HCD=y @@ -143,3 +166,4 @@ CONFIG_SDP_LOADADDR=0x40400000 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_IMX_WATCHDOG=y

+CONFIG_HEXDUMP=y

2.43.0