From: John Schmoller jschmoller@xes-inc.com

When a CFI flash chip could not be detected an error message similar to the following would be printed on bootup:

FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 0 MB

The printf incorrectly converted the flash size into megabytes. This patch fixes the printing of the flash size in megabytes:

FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 16 MB

Signed-off-by: John Schmoller jschmoller@xes-inc.com Signed-off-by: Peter Tyser ptyser@xes-inc.com --- drivers/mtd/cfi_flash.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 02dd27f..798902f 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -2033,7 +2033,7 @@ unsigned long flash_init (void) printf ("## Unknown FLASH on Bank %d " "- Size = 0x%08lx = %ld MB\n", i+1, flash_info[i].size, - flash_info[i].size << 20); + flash_info[i].size >> 20); #endif /* CONFIG_SYS_FLASH_QUIET_TEST */ } #ifdef CONFIG_SYS_FLASH_PROTECTION