Add Kconfigs which enable the video driver and splash screen at SPL stage only and not at u-boot proper. The existing Kconfigs from u-boot proper were not used to make SPL splash screen independent to them.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - Replace CMD_BMP with BMP.

V5: - Added Reviewed-by tag.

V4: - No change.

V3: - Add separate SPL video and splash configs. - Reviewed-by tag not added due to additional changes in V3.

V2: - No change.

drivers/video/Kconfig | 223 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 222 insertions(+), 1 deletion(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 60f4a4bf9c..05eaaa767a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -893,7 +893,7 @@ endif # SPLASH_SCREEN

config VIDEO_BMP_GZIP bool "Gzip compressed BMP image support" - depends on CMD_BMP || SPLASH_SCREEN + depends on BMP || SPLASH_SCREEN help If this option is set, additionally to standard BMP images, gzipped BMP images can be displayed via the @@ -930,4 +930,225 @@ config BMP_32BPP

endif # VIDEO

+config SPL_VIDEO + bool "Enable driver model support for LCD/video" + depends on SPL_DM + help + The video subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use video drivers in + SPL, enable this option. It might provide a cleaner interface to + setting up video within SPL, and allows the same drivers to be + used as U-Boot proper. + +if SPL_VIDEO +source "drivers/video/tidss/Kconfig" + +config SPL_VIDEO_LOGO + bool "Show the U-Boot logo on the display atSPL" + default y if !SPL_SPLASH_SCREEN + select SPL_VIDEO_BMP_RLE8 + help + This enables showing the U-Boot logo on the display when a video + device is probed. It appears at the top right. The logo itself is at + tools/logos/u-boot_logo.bmp and looks best when the display has a + black background. + +config SPL_SPLASH_SCREEN + bool "Show a splash-screen image at SPL" + help + If this option is set, the environment is checked for a variable + "splashimage" at spl stage. + +config SPL_SYS_WHITE_ON_BLACK + bool "Display console as white on a black background at SPL" + help + Normally the display is black on a white background, Enable this + option to invert this, i.e. white on a black background at spl stage. + This can be better in low-light situations or to reduce eye strain in + some cases. + +config SPL_VIDEO_PCI_DEFAULT_FB_SIZE + hex "Default framebuffer size to use if no drivers request it at SPL" + default 0x1000000 if X86 && PCI + default 0 if !(X86 && PCI) + help + Generally, video drivers request the amount of memory they need for + the frame buffer when they are bound, by setting the size field in + struct video_uc_plat. That memory is then reserved for use after + relocation. But PCI drivers cannot be bound before relocation unless + they are mentioned in the devicetree. + + With this value set appropriately, it is possible for PCI video + devices to have a framebuffer allocated by U-Boot. + + Note: the framebuffer needs to be large enough to store all pixels at + maximum resolution. For example, at 1920 x 1200 with 32 bits per + pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. + +config SPL_CONSOLE_SCROLL_LINES + int "Number of lines to scroll the console by at SPL" + default 1 + help + When the console need to be scrolled, this is the number of + lines to scroll by. It defaults to 1. Increasing this makes the + console jump but can help speed up operation when scrolling + is slow. + +config SPL_CONSOLE_NORMAL + bool "Support a simple text console at SPL" + default y + help + Support drawing text on the frame buffer console so that it can be + used as a console. Rotation is not supported by this driver (see + CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used + for the display. + +config SPL_BACKLIGHT + bool "Enable panel backlight uclass support at SPL" + default y + help + This provides backlight uclass driver that enables basic panel + backlight support. + +config SPL_PANEL + bool "Enable panel uclass support at SPL" + default y + help + This provides panel uclass driver that enables basic panel support. + +config SPL_SIMPLE_PANEL + bool "Enable simple panel support at SPL" + depends on SPL_PANEL && SPL_BACKLIGHT && SPL_DM_GPIO + default y + help + This turns on a simple panel driver that enables a compatible + video panel. + +config SPL_SYS_WHITE_ON_BLACK + bool "Display console as white on a black background at SPL" + help + Normally the display is black on a white background, Enable this + option to invert this, i.e. white on a black background at spl stage. + This can be better in low-light situations or to reduce eye strain in + some cases. + +if SPL_SPLASH_SCREEN + +config SPL_SPLASH_SCREEN_ALIGN + bool "Allow positioning the splash image anywhere on the display at SPL" + help + If this option is set the splash image can be freely positioned + on the screen only at SPL. Environment variable "splashpos" specifies + the position as "x,y". If a positive number is given it is used as + number of pixel from left/top. If a negative number is given it + is used as number of pixel from right/bottom. + +config SPL_SPLASH_SOURCE + bool "Control the source of the splash image at SPL" + help + Use the splash_source.c library. This library provides facilities to + declare board specific splash image locations, routines for loading + splash image from supported locations, and a way of controlling the + selected splash location using the "splashsource" environment + variable. + + This CONFIG works as follows: + + - If splashsource is set to a supported location name as defined by + board code, use that splash location. + - If splashsource is undefined, use the first splash location as + default. + - If splashsource is set to an unsupported value, do not load a splash + screen. + + A splash source location can describe either storage with raw data, a + storage formatted with a file system or a FIT image. In case of a + filesystem, the splash screen data is loaded as a file. The name of + the splash screen file can be controlled with the environment variable + "splashfile". + + To enable loading the splash image from a FIT image, CONFIG_FIT must + be enabled. The FIT image has to start at the 'offset' field address + in the selected splash location. The name of splash image within the + FIT shall be specified by the environment variable "splashfile". + + In case the environment variable "splashfile" is not defined the + default name 'splash.bmp' will be used. + +endif # SPL_SPLASH_SCREEN + +config SPL_VIDEO_BMP_GZIP + bool "Gzip compressed BMP image support at SPL" + depends on SPL_SPLASH_SCREEN || SPL_BMP + help + If this option is set, additionally to standard BMP + images, gzipped BMP images can be displayed via the + splashscreen supportat SPL stage. + +config SPL_VIDEO_LOGO_MAX_SIZE + hex "Maximum size of the bitmap logo in bytes at SPL" + default 0x100000 + help + Sets the maximum uncompressed size of the logo. This is needed when + decompressing a BMP file using the gzip algorithm, since it cannot + read the size from the bitmap header. + +config SPL_VIDEO_BMP_RLE8 + bool "Run length encoded BMP image (RLE8) support at SPL" + help + If this option is set, the 8-bit RLE compressed BMP images + is supported. + +config SPL_BMP_16BPP + bool "16-bit-per-pixel BMP image support at SPL" + help + Support display of bitmaps file with 16-bit-per-pixel + +config SPL_BMP_24BPP + bool "24-bit-per-pixel BMP image support at SPL" + help + Support display of bitmaps file with 24-bit-per-pixel. + +config SPL_BMP_32BPP + bool "32-bit-per-pixel BMP image support at SPL" + help + Support display of bitmaps file with 32-bit-per-pixel. + +config SPL_VIDEO_BPP8 + bool "Support 8-bit-per-pixel displays at SPL" + default y + help + Support drawing text and bitmaps onto a 8-bit-per-pixel display. + Enabling this will include code to support this display. Without + this option, such displays will not be supported and console output + will be empty. + +config SPL_VIDEO_BPP16 + bool "Support 16-bit-per-pixel displays at SPL" + default y + help + Support drawing text and bitmaps onto a 16-bit-per-pixel display. + Enabling this will include code to support this display. Without + this option, such displays will not be supported and console output + will be empty. + +config SPL_VIDEO_BPP32 + bool "Support 32-bit-per-pixel displays at SPL" + default y + help + Support drawing text and bitmaps onto a 32-bit-per-pixel display. + Enabling this will include code to support this display. Without + this option, such displays will not be supported and console output + will be empty. + +config SPL_HIDE_LOGO_VERSION + bool "Hide the version information on the splash screen at SPL" + help + Normally the U-Boot version string is shown on the display when the + splash screen is enabled. This information is not otherwise visible + since video starts up after U-Boot has displayed the initial banner. + + Enable this option to hide this information. +endif + endmenu

To enable tidss display driver only at SPL stage, add necessary config, CONFIG_SPL_VIDEO_TIDSS.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - Fix commit message. - Add Reviewed-By tag.

V5: - No change

V4: - Add Reviewed-By tag

V3: - No change

V2: - No change

drivers/video/tidss/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/drivers/video/tidss/Kconfig b/drivers/video/tidss/Kconfig index 2a5e56ea4e..95086f3a5d 100644 --- a/drivers/video/tidss/Kconfig +++ b/drivers/video/tidss/Kconfig @@ -16,3 +16,9 @@ menuconfig VIDEO_TIDSS DPI . This option enables these supports which can be used on devices which have OLDI or HDMI display connected.

+config SPL_VIDEO_TIDSS + bool "Enable TIDSS video support in SPL Stage" + depends on SPL_VIDEO + help + This options enables tidss driver in SPL stage. If + you need to use tidss at SPL stage use this config.

To enable splash screen and loading bmp from boot media, add rules to compile splash.c and splash_source.c at SPL stage only when CONFIG_SPL_SPLASH_SCREEN and CONFIG_SPL_SPLASH_SOURCE are defined.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - Add Reviewed-by tag.

V5: - No change

V4: - No change

V3 (patch introduced): - Rule to compile splash.c and splash_source.c.

common/Makefile | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/common/Makefile b/common/Makefile index a50302d8b5..3a6ca337e0 100644 --- a/common/Makefile +++ b/common/Makefile @@ -56,6 +56,8 @@ obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o obj-$(CONFIG_SPL_USB_HOST) += usb.o usb_hub.o obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o obj-$(CONFIG_SPL_MUSB_NEW) += usb.o +obj-$(CONFIG_SPL_SPLASH_SCREEN) += splash.o +obj-$(CONFIG_SPL_SPLASH_SOURCE) += splash_source.o endif # CONFIG_SPL_BUILD

#others

Add CONFIG_BMP and CONFIG_SPL_BMP which enable displaying bmp images at u-boot proper and SPL.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - Added Reviewed-by tag.

V5: - Added Reviewed-by tag.

V4: - No change.

V3 (patch introduced): - Add CONFIG BMP and SPL_BMP.

common/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/common/Kconfig b/common/Kconfig index 7ff62552cb..7329dc8253 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1154,3 +1154,15 @@ config FDT_SIMPLEFB

config IO_TRACE bool + +config BMP + bool "Enable bmp image display" + default y if CMD_BMP + help + Enable bmp functions to display bmp image and get bmp info. + +config SPL_BMP + bool "Enable bmp image display at SPL" + depends on SPL_VIDEO + help + Enable bmp functions to display bmp image and get bmp info at SPL.

Add rule to compile bmp.c at SPL and u-boot proper when CONFIG_SPL_BMP and CONFIG_BMP are defined.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - Add Reviewed-by tag.

V5: - Remove obj-y+= read.o.

V4: - No change.

V3 (patch introduced): - Rule to compile common/bmp.

common/Makefile | 1 + 1 file changed, 1 insertion(+)

diff --git a/common/Makefile b/common/Makefile index 3a6ca337e0..c87bb2e78b 100644 --- a/common/Makefile +++ b/common/Makefile @@ -45,6 +45,7 @@ endif # !CONFIG_SPL_BUILD

obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o +obj-$(CONFIG_$(SPL_)BMP) += bmp.o

ifdef CONFIG_SPL_BUILD ifdef CONFIG_SPL_DFU

To support video driver at SPL use CONFIG_IS_ENABLED and CONFIG_VAL, which checks for stage specific configs and thus enables video support at respective stage.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - No change.

V5: - Add Reviewed-By tag. - Use COFIG_IS_ENABLED in console_core in place of console_normal.

V4: - No change.

V3 (patch introduced): - Enable necessary video functions at SPL.

drivers/video/console_core.c | 6 +++--- drivers/video/vidconsole-uclass.c | 2 +- drivers/video/video-uclass.c | 14 +++++++------- drivers/video/video_bmp.c | 8 ++++---- 4 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/video/console_core.c b/drivers/video/console_core.c index d4f79c656a..1f93b1b85f 100644 --- a/drivers/video/console_core.c +++ b/drivers/video/console_core.c @@ -46,11 +46,11 @@ static int console_set_font(struct udevice *dev, struct video_fontdata *fontdata

int check_bpix_support(int bpix) { - if (bpix == VIDEO_BPP8 && IS_ENABLED(CONFIG_VIDEO_BPP8)) + if (bpix == VIDEO_BPP8 && CONFIG_IS_ENABLED(VIDEO_BPP8)) return 0; - else if (bpix == VIDEO_BPP16 && IS_ENABLED(CONFIG_VIDEO_BPP16)) + else if (bpix == VIDEO_BPP16 && CONFIG_IS_ENABLED(VIDEO_BPP16)) return 0; - else if (bpix == VIDEO_BPP32 && IS_ENABLED(CONFIG_VIDEO_BPP32)) + else if (bpix == VIDEO_BPP32 && CONFIG_IS_ENABLED(VIDEO_BPP32)) return 0; else return -ENOSYS; diff --git a/drivers/video/vidconsole-uclass.c b/drivers/video/vidconsole-uclass.c index 1225de2333..a21fde0e1d 100644 --- a/drivers/video/vidconsole-uclass.c +++ b/drivers/video/vidconsole-uclass.c @@ -86,7 +86,7 @@ static void vidconsole_newline(struct udevice *dev) struct vidconsole_priv *priv = dev_get_uclass_priv(dev); struct udevice *vid_dev = dev->parent; struct video_priv *vid_priv = dev_get_uclass_priv(vid_dev); - const int rows = CONFIG_CONSOLE_SCROLL_LINES; + const int rows = CONFIG_VAL(CONSOLE_SCROLL_LINES); int i, ret;

priv->xcur_frac = priv->xstart_frac; diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index da89f43144..8396bdfb11 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -132,7 +132,7 @@ int video_reserve(ulong *addrp)

/* Allocate space for PCI video devices in case there were not bound */ if (*addrp == gd->video_top) - *addrp -= CONFIG_VIDEO_PCI_DEFAULT_FB_SIZE; + *addrp -= CONFIG_VAL(VIDEO_PCI_DEFAULT_FB_SIZE);

gd->video_bottom = *addrp; gd->fb_base = *addrp; @@ -149,7 +149,7 @@ int video_fill(struct udevice *dev, u32 colour)

switch (priv->bpix) { case VIDEO_BPP16: - if (IS_ENABLED(CONFIG_VIDEO_BPP16)) { + if (CONFIG_IS_ENABLED(VIDEO_BPP16)) { u16 *ppix = priv->fb; u16 *end = priv->fb + priv->fb_size;

@@ -158,7 +158,7 @@ int video_fill(struct udevice *dev, u32 colour) break; } case VIDEO_BPP32: - if (IS_ENABLED(CONFIG_VIDEO_BPP32)) { + if (CONFIG_IS_ENABLED(VIDEO_BPP32)) { u32 *ppix = priv->fb; u32 *end = priv->fb + priv->fb_size;

@@ -212,14 +212,14 @@ u32 video_index_to_colour(struct video_priv *priv, unsigned int idx) { switch (priv->bpix) { case VIDEO_BPP16: - if (IS_ENABLED(CONFIG_VIDEO_BPP16)) { + if (CONFIG_IS_ENABLED(VIDEO_BPP16)) { return ((colours[idx].r >> 3) << 11) | ((colours[idx].g >> 2) << 5) | ((colours[idx].b >> 3) << 0); } break; case VIDEO_BPP32: - if (IS_ENABLED(CONFIG_VIDEO_BPP32)) { + if (CONFIG_IS_ENABLED(VIDEO_BPP32)) { if (priv->format == VIDEO_X2R10G10B10) return (colours[idx].r << 22) | (colours[idx].g << 12) | @@ -513,8 +513,8 @@ static int video_post_probe(struct udevice *dev) return ret; }

- if (IS_ENABLED(CONFIG_VIDEO_LOGO) && - !IS_ENABLED(CONFIG_SPLASH_SCREEN) && !plat->hide_logo) { + if (CONFIG_IS_ENABLED(VIDEO_LOGO) && + !CONFIG_IS_ENABLED(SPLASH_SCREEN) && !plat->hide_logo) { ret = show_splash(dev); if (ret) { log_debug("Cannot show splash screen\n"); diff --git a/drivers/video/video_bmp.c b/drivers/video/video_bmp.c index 6188a13e44..47e52c4f69 100644 --- a/drivers/video/video_bmp.c +++ b/drivers/video/video_bmp.c @@ -320,7 +320,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, switch (bmp_bpix) { case 1: case 8: - if (IS_ENABLED(CONFIG_VIDEO_BMP_RLE8)) { + if (CONFIG_IS_ENABLED(VIDEO_BMP_RLE8)) { u32 compression = get_unaligned_le32( &bmp->header.compression); debug("compressed %d %d\n", compression, BMP_BI_RLE8); @@ -348,7 +348,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, } break; case 16: - if (IS_ENABLED(CONFIG_BMP_16BPP)) { + if (CONFIG_IS_ENABLED(BMP_16BPP)) { for (i = 0; i < height; ++i) { schedule(); for (j = 0; j < width; j++) { @@ -361,7 +361,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, } break; case 24: - if (IS_ENABLED(CONFIG_BMP_24BPP)) { + if (CONFIG_IS_ENABLED(BMP_24BPP)) { for (i = 0; i < height; ++i) { for (j = 0; j < width; j++) { if (bpix == 16) { @@ -395,7 +395,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, } break; case 32: - if (IS_ENABLED(CONFIG_BMP_32BPP)) { + if (CONFIG_IS_ENABLED(BMP_32BPP)) { for (i = 0; i < height; ++i) { for (j = 0; j < width; j++) { if (eformat == VIDEO_X2R10G10B10) {

To support splash screen at both u-boot proper and SPL use CONFIG_IS_ENABLED and CONFIG_VAL to check for video related Kconfigs at respective stages.

Replace CONFIG_CMD_BMP with CONFIG_BMP to enable splash_display function at u-boot proper and SPL.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - Fix commit message. - Add Reviewed-by tag.

V5: - Replace CONFIG_CMD_BMP with CONFIG_BMP.

V4: - No change

V3 (patch introduced): - Enable splash functions at SPL

common/bmp.c | 10 +++++----- common/splash.c | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/common/bmp.c b/common/bmp.c index 6134ada5a7..c54c4ca63d 100644 --- a/common/bmp.c +++ b/common/bmp.c @@ -32,7 +32,7 @@ * Returns NULL if decompression failed, or if the decompressed data * didn't contain a valid BMP signature. */ -#ifdef CONFIG_VIDEO_BMP_GZIP +#if CONFIG_IS_ENABLED(VIDEO_BMP_GZIP) struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, void **alloc_addr) { @@ -43,9 +43,9 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, /* * Decompress bmp image */ - len = CONFIG_VIDEO_LOGO_MAX_SIZE; + len = CONFIG_VAL(VIDEO_LOGO_MAX_SIZE); /* allocate extra 3 bytes for 32-bit-aligned-address + 2 alignment */ - dst = malloc(CONFIG_VIDEO_LOGO_MAX_SIZE + 3); + dst = malloc(CONFIG_VAL(VIDEO_LOGO_MAX_SIZE) + 3); if (!dst) { puts("Error: malloc in gunzip failed!\n"); return NULL; @@ -54,12 +54,12 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, /* align to 32-bit-aligned-address + 2 */ bmp = dst + 2;

- if (gunzip(bmp, CONFIG_VIDEO_LOGO_MAX_SIZE, map_sysmem(addr, 0), + if (gunzip(bmp, CONFIG_VAL(VIDEO_LOGO_MAX_SIZE), map_sysmem(addr, 0), &len)) { free(dst); return NULL; } - if (len == CONFIG_VIDEO_LOGO_MAX_SIZE) + if (len == CONFIG_VAL(VIDEO_LOGO_MAX_SIZE)) puts("Image could be truncated (increase CONFIG_VIDEO_LOGO_MAX_SIZE)!\n");

/* diff --git a/common/splash.c b/common/splash.c index 4bc54b1bf9..89bb9a6a20 100644 --- a/common/splash.c +++ b/common/splash.c @@ -89,14 +89,14 @@ static inline int splash_video_logo_load(void) { return -ENOSYS; }

__weak int splash_screen_prepare(void) { - if (IS_ENABLED(CONFIG_SPLASH_SOURCE)) + if (CONFIG_IS_ENABLED(SPLASH_SOURCE)) return splash_source_load(default_splash_locations, ARRAY_SIZE(default_splash_locations));

return splash_video_logo_load(); }

-#ifdef CONFIG_SPLASH_SCREEN_ALIGN +#if CONFIG_IS_ENABLED(SPLASH_SCREEN_ALIGN) void splash_get_pos(int *x, int *y) { char *s = env_get("splashpos"); @@ -119,7 +119,7 @@ void splash_get_pos(int *x, int *y) } #endif /* CONFIG_SPLASH_SCREEN_ALIGN */

-#if defined(CONFIG_VIDEO) && !defined(CONFIG_HIDE_LOGO_VERSION) +#if CONFIG_IS_ENABLED(VIDEO) && !CONFIG_IS_ENABLED(HIDE_LOGO_VERSION)

#ifdef CONFIG_VIDEO_LOGO #include <bmp_logo.h> @@ -159,7 +159,7 @@ void splash_display_banner(void) * Common function to show a splash image if env("splashimage") is set. * For additional details please refer to doc/README.splashprepare. */ -#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_CMD_BMP) +#if CONFIG_IS_ENABLED(SPLASH_SCREEN) && CONFIG_IS_ENABLED(BMP) int splash_display(void) { ulong addr; @@ -183,7 +183,7 @@ int splash_display(void) if (x || y) goto end;

-#if defined(CONFIG_VIDEO) && !defined(CONFIG_HIDE_LOGO_VERSION) +#if CONFIG_IS_ENABLED(VIDEO) && CONFIG_IS_ENABLED(HIDE_LOGO_VERSION) splash_display_banner(); #endif end:

To include video related global data variables and splash functions at SPL and u-boot proper, use CONFIG_IS_ENABLED.

Replace CONFIG_CMD_BMP with CONFIG_BMP to enable splash_display function at u-boot proper and SPL.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - Fix commit message. - Add Reviewed-by tag.

V5: - Replace CONFIG_CMD_BMP with CONFIG_BMP.

V4: - No change

V3 (patch introduced): - Enable splash functions at SPL

include/asm-generic/global_data.h | 4 ++-- include/splash.h | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 987fb66c17..65bf8df1e5 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -68,7 +68,7 @@ struct global_data { * @mem_clk: memory clock rate in Hz */ unsigned long mem_clk; -#if defined(CONFIG_VIDEO) +#if CONFIG_IS_ENABLED(VIDEO) /** * @fb_base: base address of frame buffer memory */ @@ -359,7 +359,7 @@ struct global_data { */ struct membuff console_in; #endif -#ifdef CONFIG_VIDEO +#if CONFIG_IS_ENABLED(VIDEO) /** * @video_top: top of video frame buffer area */ diff --git a/include/splash.h b/include/splash.h index 33e45e6941..b6a100ffc3 100644 --- a/include/splash.h +++ b/include/splash.h @@ -49,7 +49,7 @@ struct splash_location { char *ubivol; /* UBI volume-name for ubifsmount */ };

-#ifdef CONFIG_SPLASH_SOURCE +#if CONFIG_IS_ENABLED(SPLASH_SOURCE) int splash_source_load(struct splash_location *locations, uint size); #else static inline int splash_source_load(struct splash_location *locations, @@ -61,13 +61,13 @@ static inline int splash_source_load(struct splash_location *locations,

int splash_screen_prepare(void);

-#ifdef CONFIG_SPLASH_SCREEN_ALIGN +#if CONFIG_IS_ENABLED(SPLASH_SCREEN_ALIGN) void splash_get_pos(int *x, int *y); #else static inline void splash_get_pos(int *x, int *y) { } #endif

-#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_CMD_BMP) +#if CONFIG_IS_ENABLED(SPLASH_SCREEN) && CONFIG_IS_ENABLED(BMP) int splash_display(void); #else static inline int splash_display(void)

Add ospi boot media support to load splash image from OSPI memory, add offset to read image from ospi and necessary flags defininig type of storage and storage device.

Use CONFIG_IS_ENBALED to use the splash locations at SPL and u-boot proper.

Signed-off-by: Nikhil M Jain n-jain1@ti.com Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Devarsh Thakkar devarsht@ti.com --- V6: - No change.

V5: - Replace #ifdef with #if. - Add Reviewed-by tag.

V4: - Added Reviewed-by tag.

V3: - Enable splash location at SPL.

V2: - No change.

board/ti/am62x/evm.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/board/ti/am62x/evm.c b/board/ti/am62x/evm.c index 584b4ec552..fd58ece29c 100644 --- a/board/ti/am62x/evm.c +++ b/board/ti/am62x/evm.c @@ -20,8 +20,14 @@

DECLARE_GLOBAL_DATA_PTR;

-#ifdef CONFIG_SPLASH_SCREEN +#if CONFIG_IS_ENABLED(SPLASH_SCREEN) static struct splash_location default_splash_locations[] = { + { + .name = "sf", + .storage = SPLASH_STORAGE_SF, + .flags = SPLASH_STORAGE_RAW, + .offset = 0x700000, + }, { .name = "mmc", .storage = SPLASH_STORAGE_MMC,