[PATCH v3 0/5] enable DMA and CPSW nodes for am62ax SoC family

newer
Pull request: u-boot-sunxi/master...

older
[PATCH v2 0/5] enable DMA and CPSW...

Bryan Brattlof

14 Apr 2023 14 Apr '23

8:01 p.m.

Hello again everyone!

This patch series syncs TI's am62ax device tree files with what has been merged in the v6.3-rc6 of the Linux Kernel. This series will also enable YMODEM support to make automated testing (which uses the UART boot method to load the bootloaders into the SoC)

Thanks for reviewing ~Bryan

Changes from v2: [1] - pulled linux dtbs from v6.3-rc6 instead of -rc4

Changed from v1: [0] - Rebased on top of -next branch - dropped 'u-boot,dm-spl' for the new 'bootph-pre-ram' properties

[0] https://lore.kernel.org/u-boot/20230327184035.2128786-1-bb@ti.com/ [1] https://lore.kernel.org/u-boot/20230402213617.1759491-1-bb@ti.com/

Bryan Brattlof (4): arm: dts: sync am62ax dtbs with linux v6.3-rc6 arm: dts: add DMA and CPSW nodes for uboot configs: enable net features for am62ax configs: am62ax: enable ymodem support for a53 spl

Vignesh Raghavendra (1): dma: ti: k3-udma: Introduce DMA support for the am62ax

arch/arm/dts/k3-am62a-main.dtsi | 365 ++++++++++++++++++++++++++ arch/arm/dts/k3-am62a-mcu.dtsi | 51 ++++ arch/arm/dts/k3-am62a-wakeup.dtsi | 2 +- arch/arm/dts/k3-am62a7-r5-sk.dts | 8 + arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 26 +- arch/arm/dts/k3-am62a7-sk.dts | 75 +++++- arch/arm/dts/k3-am62a7.dtsi | 1 + configs/am62ax_evm_a53_defconfig | 7 +- drivers/dma/ti/Makefile | 1 + drivers/dma/ti/k3-psil-am62a.c | 196 ++++++++++++++ drivers/dma/ti/k3-psil-priv.h | 1 + drivers/dma/ti/k3-psil.c | 2 + 12 files changed, 729 insertions(+), 6 deletions(-) create mode 100644 drivers/dma/ti/k3-psil-am62a.c

base-commit: a25dcda452bf6a6de72764a8d990d72e5def643d

-- 2.40.0

Show replies by date

Bryan Brattlof

14 Apr 14 Apr

8:01 p.m.

New subject: [PATCH v3 1/5] dma: ti: k3-udma: Introduce DMA support for the am62ax

From: Vignesh Raghavendra vigneshr@ti.com

In preparation for enabling ethernet for the am62ax family of SoCs, introduce the initial DMA channel settings for the am62ax

Signed-off-by: Vignesh Raghavendra vigneshr@ti.com [bb@ti.com: expanded on commit message] Signed-off-by: Bryan Brattlof bb@ti.com --- drivers/dma/ti/Makefile | 1 + drivers/dma/ti/k3-psil-am62a.c | 196 +++++++++++++++++++++++++++++++++ drivers/dma/ti/k3-psil-priv.h | 1 + drivers/dma/ti/k3-psil.c | 2 + 4 files changed, 200 insertions(+) create mode 100644 drivers/dma/ti/k3-psil-am62a.c

diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile index 6807eb8e8b2d3..f4e0271efbf32 100644 --- a/drivers/dma/ti/Makefile +++ b/drivers/dma/ti/Makefile @@ -8,3 +8,4 @@ k3-psil-data-$(CONFIG_SOC_K3_J721E) += k3-psil-j721e.o k3-psil-data-$(CONFIG_SOC_K3_J721S2) += k3-psil-j721s2.o k3-psil-data-$(CONFIG_SOC_K3_AM642) += k3-psil-am64.o k3-psil-data-$(CONFIG_SOC_K3_AM625) += k3-psil-am62.o +k3-psil-data-$(CONFIG_SOC_K3_AM62A7) += k3-psil-am62a.o diff --git a/drivers/dma/ti/k3-psil-am62a.c b/drivers/dma/ti/k3-psil-am62a.c new file mode 100644 index 0000000000000..ca9d71f914220 --- /dev/null +++ b/drivers/dma/ti/k3-psil-am62a.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com + */ + +#include <linux/kernel.h> + +#include "k3-psil-priv.h" + +#define PSIL_PDMA_XY_TR(x) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_PDMA_XY, \ + .mapped_channel_id = -1, \ + .default_flow_id = -1, \ + }, \ + } + +#define PSIL_PDMA_XY_PKT(x) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_PDMA_XY, \ + .mapped_channel_id = -1, \ + .default_flow_id = -1, \ + .pkt_mode = 1, \ + }, \ + } + +#define PSIL_ETHERNET(x, ch, flow_base, flow_cnt) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_NATIVE, \ + .pkt_mode = 1, \ + .needs_epib = 1, \ + .psd_size = 16, \ + .mapped_channel_id = ch, \ + .flow_start = flow_base, \ + .flow_num = flow_cnt, \ + .default_flow_id = flow_base, \ + }, \ + } + +#define PSIL_SAUL(x, ch, flow_base, flow_cnt, default_flow, tx) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_NATIVE, \ + .pkt_mode = 1, \ + .needs_epib = 1, \ + .psd_size = 64, \ + .mapped_channel_id = ch, \ + .flow_start = flow_base, \ + .flow_num = flow_cnt, \ + .default_flow_id = default_flow, \ + .notdpkt = tx, \ + }, \ + } + +#define PSIL_PDMA_MCASP(x) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_PDMA_XY, \ + .pdma_acc32 = 1, \ + .pdma_burst = 1, \ + }, \ + } + +#define PSIL_CSI2RX(x) \ + { \ + .thread_id = x, \ + .ep_config = { \ + .ep_type = PSIL_EP_NATIVE, \ + }, \ + } + +/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */ +static struct psil_ep am62a_src_ep_map[] = { + /* SAUL */ + PSIL_SAUL(0x7504, 20, 35, 8, 35, 0), + PSIL_SAUL(0x7505, 21, 35, 8, 36, 0), + PSIL_SAUL(0x7506, 22, 43, 8, 43, 0), + PSIL_SAUL(0x7507, 23, 43, 8, 44, 0), + /* PDMA_MAIN0 - SPI0-3 */ + PSIL_PDMA_XY_PKT(0x4302), + PSIL_PDMA_XY_PKT(0x4303), + PSIL_PDMA_XY_PKT(0x4304), + PSIL_PDMA_XY_PKT(0x4305), + PSIL_PDMA_XY_PKT(0x4306), + PSIL_PDMA_XY_PKT(0x4307), + PSIL_PDMA_XY_PKT(0x4308), + PSIL_PDMA_XY_PKT(0x4309), + PSIL_PDMA_XY_PKT(0x430a), + PSIL_PDMA_XY_PKT(0x430b), + PSIL_PDMA_XY_PKT(0x430c), + PSIL_PDMA_XY_PKT(0x430d), + /* PDMA_MAIN1 - UART0-6 */ + PSIL_PDMA_XY_PKT(0x4400), + PSIL_PDMA_XY_PKT(0x4401), + PSIL_PDMA_XY_PKT(0x4402), + PSIL_PDMA_XY_PKT(0x4403), + PSIL_PDMA_XY_PKT(0x4404), + PSIL_PDMA_XY_PKT(0x4405), + PSIL_PDMA_XY_PKT(0x4406), + /* PDMA_MAIN2 - MCASP0-2 */ + PSIL_PDMA_MCASP(0x4500), + PSIL_PDMA_MCASP(0x4501), + PSIL_PDMA_MCASP(0x4502), + /* CPSW3G */ + PSIL_ETHERNET(0x4600, 19, 19, 16), + /* CSI2RX */ + PSIL_CSI2RX(0x5000), + PSIL_CSI2RX(0x5001), + PSIL_CSI2RX(0x5002), + PSIL_CSI2RX(0x5003), + PSIL_CSI2RX(0x5004), + PSIL_CSI2RX(0x5005), + PSIL_CSI2RX(0x5006), + PSIL_CSI2RX(0x5007), + PSIL_CSI2RX(0x5008), + PSIL_CSI2RX(0x5009), + PSIL_CSI2RX(0x500a), + PSIL_CSI2RX(0x500b), + PSIL_CSI2RX(0x500c), + PSIL_CSI2RX(0x500d), + PSIL_CSI2RX(0x500e), + PSIL_CSI2RX(0x500f), + PSIL_CSI2RX(0x5010), + PSIL_CSI2RX(0x5011), + PSIL_CSI2RX(0x5012), + PSIL_CSI2RX(0x5013), + PSIL_CSI2RX(0x5014), + PSIL_CSI2RX(0x5015), + PSIL_CSI2RX(0x5016), + PSIL_CSI2RX(0x5017), + PSIL_CSI2RX(0x5018), + PSIL_CSI2RX(0x5019), + PSIL_CSI2RX(0x501a), + PSIL_CSI2RX(0x501b), + PSIL_CSI2RX(0x501c), + PSIL_CSI2RX(0x501d), + PSIL_CSI2RX(0x501e), + PSIL_CSI2RX(0x501f), +}; + +/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */ +static struct psil_ep am62a_dst_ep_map[] = { + /* SAUL */ + PSIL_SAUL(0xf500, 27, 83, 8, 83, 1), + PSIL_SAUL(0xf501, 28, 91, 8, 91, 1), + /* PDMA_MAIN0 - SPI0-3 */ + PSIL_PDMA_XY_PKT(0xc302), + PSIL_PDMA_XY_PKT(0xc303), + PSIL_PDMA_XY_PKT(0xc304), + PSIL_PDMA_XY_PKT(0xc305), + PSIL_PDMA_XY_PKT(0xc306), + PSIL_PDMA_XY_PKT(0xc307), + PSIL_PDMA_XY_PKT(0xc308), + PSIL_PDMA_XY_PKT(0xc309), + PSIL_PDMA_XY_PKT(0xc30a), + PSIL_PDMA_XY_PKT(0xc30b), + PSIL_PDMA_XY_PKT(0xc30c), + PSIL_PDMA_XY_PKT(0xc30d), + /* PDMA_MAIN1 - UART0-6 */ + PSIL_PDMA_XY_PKT(0xc400), + PSIL_PDMA_XY_PKT(0xc401), + PSIL_PDMA_XY_PKT(0xc402), + PSIL_PDMA_XY_PKT(0xc403), + PSIL_PDMA_XY_PKT(0xc404), + PSIL_PDMA_XY_PKT(0xc405), + PSIL_PDMA_XY_PKT(0xc406), + /* PDMA_MAIN2 - MCASP0-2 */ + PSIL_PDMA_MCASP(0xc500), + PSIL_PDMA_MCASP(0xc501), + PSIL_PDMA_MCASP(0xc502), + /* CPSW3G */ + PSIL_ETHERNET(0xc600, 19, 19, 8), + PSIL_ETHERNET(0xc601, 20, 27, 8), + PSIL_ETHERNET(0xc602, 21, 35, 8), + PSIL_ETHERNET(0xc603, 22, 43, 8), + PSIL_ETHERNET(0xc604, 23, 51, 8), + PSIL_ETHERNET(0xc605, 24, 59, 8), + PSIL_ETHERNET(0xc606, 25, 67, 8), + PSIL_ETHERNET(0xc607, 26, 75, 8), +}; + +struct psil_ep_map am62a_ep_map = { + .name = "am62a", + .src = am62a_src_ep_map, + .src_count = ARRAY_SIZE(am62a_src_ep_map), + .dst = am62a_dst_ep_map, + .dst_count = ARRAY_SIZE(am62a_dst_ep_map), +}; diff --git a/drivers/dma/ti/k3-psil-priv.h b/drivers/dma/ti/k3-psil-priv.h index 28078c6bd8d7d..02d479d5c9dba 100644 --- a/drivers/dma/ti/k3-psil-priv.h +++ b/drivers/dma/ti/k3-psil-priv.h @@ -42,5 +42,6 @@ extern struct psil_ep_map j721e_ep_map; extern struct psil_ep_map j721s2_ep_map; extern struct psil_ep_map am64_ep_map; extern struct psil_ep_map am62_ep_map; +extern struct psil_ep_map am62a_ep_map;

#endif /* K3_PSIL_PRIV_H_ */ diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c index f23c8ca2b74c8..13d429b0991f3 100644 --- a/drivers/dma/ti/k3-psil.c +++ b/drivers/dma/ti/k3-psil.c @@ -26,6 +26,8 @@ struct psil_endpoint_config *psil_get_ep_config(u32 thread_id) soc_ep_map = &am64_ep_map; else if (IS_ENABLED(CONFIG_SOC_K3_AM625)) soc_ep_map = &am62_ep_map; + else if (IS_ENABLED(CONFIG_SOC_K3_AM62A7)) + soc_ep_map = &am62a_ep_map; }

if (thread_id & K3_PSIL_DST_THREAD_ID_OFFSET && soc_ep_map->dst) {

-- 2.40.0

Bryan Brattlof

8:01 p.m.

New subject: [PATCH v3 2/5] arm: dts: sync am62ax dtbs with linux v6.3-rc6

To enable Ethernet support at the uboot level, pull the device tree files from the v6.3-rc6 version of the Linux kernel.

Signed-off-by: Bryan Brattlof bb@ti.com --- arch/arm/dts/k3-am62a-main.dtsi | 365 ++++++++++++++++++++++++++++++ arch/arm/dts/k3-am62a-mcu.dtsi | 51 +++++ arch/arm/dts/k3-am62a-wakeup.dtsi | 2 +- arch/arm/dts/k3-am62a7-sk.dts | 75 +++++- arch/arm/dts/k3-am62a7.dtsi | 1 + 5 files changed, 490 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/k3-am62a-main.dtsi b/arch/arm/dts/k3-am62a-main.dtsi index bc4b50bcd1773..393a1a40b68b8 100644 --- a/arch/arm/dts/k3-am62a-main.dtsi +++ b/arch/arm/dts/k3-am62a-main.dtsi @@ -48,6 +48,18 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x00 0x00 0x00100000 0x20000>; + + phy_gmii_sel: phy@4044 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4044 0x8>; + #phy-cells = <1>; + }; + + epwm_tbclk: clock-controller@4130 { + compatible = "ti,am62-epwm-tbclk", "syscon"; + reg = <0x4130 0x4>; + #clock-cells = <1>; + }; };

dmss: bus@48000000 { @@ -69,6 +81,67 @@ interrupt-names = "rx_012"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; + + inta_main_dmss: interrupt-controller@48000000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x48000000 0x00 0x100000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <28>; + ti,interrupt-ranges = <6 70 34>; + ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; + }; + + main_bcdma: dma-controller@485c0100 { + compatible = "ti,am64-dmss-bcdma"; + reg = <0x00 0x485c0100 0x00 0x100>, + <0x00 0x4c000000 0x00 0x20000>, + <0x00 0x4a820000 0x00 0x20000>, + <0x00 0x4aa40000 0x00 0x20000>, + <0x00 0x4bc00000 0x00 0x100000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <3>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <26>; + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + }; + + main_pktdma: dma-controller@485c0000 { + compatible = "ti,am64-dmss-pktdma"; + reg = <0x00 0x485c0000 0x00 0x100>, + <0x00 0x4a800000 0x00 0x20000>, + <0x00 0x4aa00000 0x00 0x40000>, + <0x00 0x4b800000 0x00 0x400000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <30>; + ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ + <0x24>, /* CPSW_TX_CHAN */ + <0x25>, /* SAUL_TX_0_CHAN */ + <0x26>; /* SAUL_TX_1_CHAN */ + ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ + <0x11>, /* RING_CPSW_TX_CHAN */ + <0x12>, /* RING_SAUL_TX_0_CHAN */ + <0x13>; /* RING_SAUL_TX_1_CHAN */ + ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ + <0x2b>, /* CPSW_RX_CHAN */ + <0x2d>, /* SAUL_RX_0_CHAN */ + <0x2f>, /* SAUL_RX_1_CHAN */ + <0x31>, /* SAUL_RX_2_CHAN */ + <0x33>; /* SAUL_RX_3_CHAN */ + ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ + <0x2c>, /* FLOW_CPSW_RX_CHAN */ + <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ + <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ + }; };

dmsc: system-controller@44043000 { @@ -222,6 +295,39 @@ status = "disabled"; };

+ main_spi0: spi@20100000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x20100000 0x00 0x400>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 141 0>; + status = "disabled"; + }; + + main_spi1: spi@20110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20110000 0x00 0x400>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 142 0>; + status = "disabled"; + }; + + main_spi2: spi@20120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20120000 0x00 0x400>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 143 0>; + status = "disabled"; + }; + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; reg = <0x00 0x00a00000 0x00 0x800>; @@ -295,4 +401,263 @@ no-1-8-v; status = "disabled"; }; + + usbss0: dwc3-usb@f900000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f900000 0x00 0x800>; + clocks = <&k3_clks 161 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb0: usb@31000000 { + compatible = "snps,dwc3"; + reg =<0x00 0x31000000 0x00 0x50000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + usbss1: dwc3-usb@f910000 { + compatible = "ti,am62-usb"; + reg = <0x00 0x0f910000 0x00 0x800>; + clocks = <&k3_clks 162 3>; + clock-names = "ref"; + ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; + #address-cells = <2>; + #size-cells = <2>; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + ranges; + status = "disabled"; + + usb1: usb@31100000 { + compatible = "snps,dwc3"; + reg =<0x00 0x31100000 0x00 0x50000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ + interrupt-names = "host", "peripheral"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + fss: bus@fc00000 { + compatible = "simple-bus"; + reg = <0x00 0x0fc00000 0x00 0x70000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + ospi0: spi@fc40000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 75 7>; + assigned-clocks = <&k3_clks 75 7>; + assigned-clock-parents = <&k3_clks 75 8>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cpsw3g: ethernet@8000000 { + compatible = "ti,am642-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x8000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>; + clocks = <&k3_clks 13 0>; + assigned-clocks = <&k3_clks 13 3>; + assigned-clock-parents = <&k3_clks 13 11>; + clock-names = "fck"; + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + dmas = <&main_pktdma 0xc600 15>, + <&main_pktdma 0xc601 15>, + <&main_pktdma 0xc602 15>, + <&main_pktdma 0xc603 15>, + <&main_pktdma 0xc604 15>, + <&main_pktdma 0xc605 15>, + <&main_pktdma 0xc606 15>, + <&main_pktdma 0xc607 15>, + <&main_pktdma 0x4600 15>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", + "tx7", "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + phys = <&phy_gmii_sel 1>; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&wkup_conf 0x200>; + }; + + cpsw_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + phys = <&phy_gmii_sel 2>; + mac-address = [00 00 00 00 00 00]; + }; + }; + + cpsw3g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 13 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 13 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + + hwspinlock: spinlock@2a000000 { + compatible = "ti,am64-hwspinlock"; + reg = <0x00 0x2a000000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@29000000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29000000 0x00 0x200>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster1: mailbox@29010000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29010000 0x00 0x200>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster2: mailbox@29020000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29020000 0x00 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster3: mailbox@29030000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29030000 0x00 0x200>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + main_mcan0: can@20701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20701000 0x00 0x200>, + <0x00 0x20708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + epwm0: pwm@23000000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23000000 0x00 0x100>; + power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm1: pwm@23010000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23010000 0x00 0x100>; + power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + epwm2: pwm@23020000 { + compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x00 0x23020000 0x00 0x100>; + power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>; + clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap0: pwm@23100000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23100000 0x00 0x100>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23110000 0x00 0x100>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 52 0>; + clock-names = "fck"; + status = "disabled"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23120000 0x00 0x100>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 53 0>; + clock-names = "fck"; + status = "disabled"; + }; }; diff --git a/arch/arm/dts/k3-am62a-mcu.dtsi b/arch/arm/dts/k3-am62a-mcu.dtsi index 6d1e501b94abf..2bb813e784a25 100644 --- a/arch/arm/dts/k3-am62a-mcu.dtsi +++ b/arch/arm/dts/k3-am62a-mcu.dtsi @@ -36,4 +36,55 @@ clock-names = "fck"; status = "disabled"; }; + + mcu_spi0: spi@4b00000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x04b00000 0x00 0x400>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 147 0>; + status = "disabled"; + }; + + mcu_spi1: spi@4b10000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x04b10000 0x00 0x400>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 148 0>; + status = "disabled"; + }; + + mcu_gpio_intr: interrupt-controller@4210000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <5>; + ti,interrupt-ranges = <0 104 4>; + }; + + mcu_gpio0: gpio@4201000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x04201000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&mcu_gpio_intr>; + interrupts = <30>, <31>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <24>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 79 0>; + clock-names = "gpio"; + status = "disabled"; + }; }; diff --git a/arch/arm/dts/k3-am62a-wakeup.dtsi b/arch/arm/dts/k3-am62a-wakeup.dtsi index 99afac40e8d4b..81d984414fd4a 100644 --- a/arch/arm/dts/k3-am62a-wakeup.dtsi +++ b/arch/arm/dts/k3-am62a-wakeup.dtsi @@ -31,7 +31,7 @@

wkup_i2c0: i2c@2b200000 { compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x02b200000 0x00 0x100>; + reg = <0x00 0x2b200000 0x00 0x100>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/k3-am62a7-sk.dts b/arch/arm/dts/k3-am62a7-sk.dts index b08a083d722d4..5c9012141ee23 100644 --- a/arch/arm/dts/k3-am62a7-sk.dts +++ b/arch/arm/dts/k3-am62a7-sk.dts @@ -9,6 +9,7 @@

#include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> #include "k3-am62a7.dtsi"

/ { @@ -26,9 +27,8 @@

memory@80000000 { device_type = "memory"; - /* 4G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>, - <0x00000008 0x80000000 0x00000000 0x80000000>; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; };

reserved-memory { @@ -159,6 +159,36 @@ AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */ >; }; + + main_usb1_pins_default: main-usb1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; + + main_mdio1_pins_default: main-mdio1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */ + AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */ + AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */ + AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */ + AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */ + AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */ + AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */ + AM62AX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */ + AM62AX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */ + AM62AX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */ + AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */ + AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */ + AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */ + >; + }; };

&main_i2c0 { @@ -222,3 +252,42 @@ pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; }; + +&usbss1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; diff --git a/arch/arm/dts/k3-am62a7.dtsi b/arch/arm/dts/k3-am62a7.dtsi index 331d89fda29d0..9734549851c06 100644 --- a/arch/arm/dts/k3-am62a7.dtsi +++ b/arch/arm/dts/k3-am62a7.dtsi @@ -95,6 +95,7 @@

L2_0: l2-cache0 { compatible = "cache"; + cache-unified; cache-level = <2>; cache-size = <0x40000>; cache-line-size = <64>;

-- 2.40.0

Bryan Brattlof

8:01 p.m.

New subject: [PATCH v3 3/5] arm: dts: add DMA and CPSW nodes for uboot

Update the uboot dtsi to enable DMA and CPSW at the uboot level

Signed-off-by: Bryan Brattlof bb@ti.com --- arch/arm/dts/k3-am62a7-r5-sk.dts | 8 ++++++++ arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 26 +++++++++++++++++++++++++- 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/k3-am62a7-r5-sk.dts b/arch/arm/dts/k3-am62a7-r5-sk.dts index c953a82c7a5e9..b4c2fd7f50038 100644 --- a/arch/arm/dts/k3-am62a7-r5-sk.dts +++ b/arch/arm/dts/k3-am62a7-r5-sk.dts @@ -143,3 +143,11 @@ status = "okay"; bootph-pre-ram; }; + +&main_pktdma { + ti,sci = <&dm_tifs>; +}; + +&main_bcdma { + ti,sci = <&dm_tifs>; +}; diff --git a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi index cf938c43b832e..fd3f7e63d5da6 100644 --- a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi @@ -15,7 +15,7 @@ }; };

-&cbass_main{ +&cbass_main { bootph-pre-ram;

timer1: timer@2400000 { @@ -138,3 +138,27 @@ &vdd_mmc1 { bootph-pre-ram; }; + +&main_bcdma { + bootph-pre-ram; +}; + +&main_pktdma { + bootph-pre-ram; +}; + +&cpsw3g { + reg = <0x00 0x08000000 0x00 0x200000>, + <0x00 0x43000200 0x00 0x8>; + reg-names = "cpsw_nuss", "mac_efuse"; + /delete-property/ ranges; + pinctrl-0 = <&main_mdio1_pins_default + &main_rgmii1_pins_default>; + bootph-pre-ram; + + cpsw-phy-sel@04044 { + compatible = "ti,am64-phy-gmii-sel"; + reg = <0x00 0x00104044 0x00 0x8>; + bootph-pre-ram; + }; +};

-- 2.40.0

Nishanth Menon

8:10 p.m.

New subject: [PATCH v3 3/5] arm: dts: add DMA and CPSW nodes for uboot

On 13:01-20230414, Bryan Brattlof wrote:

...

Update the uboot dtsi to enable DMA and CPSW at the uboot level

Signed-off-by: Bryan Brattlof bb@ti.com

arch/arm/dts/k3-am62a7-r5-sk.dts | 8 ++++++++ arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 26 +++++++++++++++++++++++++- 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/k3-am62a7-r5-sk.dts b/arch/arm/dts/k3-am62a7-r5-sk.dts index c953a82c7a5e9..b4c2fd7f50038 100644 --- a/arch/arm/dts/k3-am62a7-r5-sk.dts +++ b/arch/arm/dts/k3-am62a7-r5-sk.dts @@ -143,3 +143,11 @@ status = "okay"; bootph-pre-ram; };

+&main_pktdma {

ti,sci = <&dm_tifs>;

+};

+&main_bcdma {

ti,sci = <&dm_tifs>;

+}; diff --git a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi index cf938c43b832e..fd3f7e63d5da6 100644 --- a/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am62a7-sk-u-boot.dtsi @@ -15,7 +15,7 @@ }; };

-&cbass_main{ +&cbass_main { bootph-pre-ram;

timer1: timer@2400000 { @@ -138,3 +138,27 @@ &vdd_mmc1 { bootph-pre-ram; };

+&main_bcdma {

bootph-pre-ram;

+};

+&main_pktdma {

bootph-pre-ram;

+};

+&cpsw3g {
reg = <0x00 0x08000000 0x00 0x200000>,
     <0x00 0x43000200 0x00 0x8>;
reg-names = "cpsw_nuss", "mac_efuse";

mac_efuse needs to go to upstream kernel.

...

/delete-property/ ranges;

pinctrl-0 = <&main_mdio1_pins_default
     &main_rgmii1_pins_default>;

Why not do this hack in board.dts and mark it due to MDIO limitation?

...

bootph-pre-ram;

cpsw-phy-sel@04044 {
compatible = "ti,am64-phy-gmii-sel";
reg = <0x00 0x00104044 0x00 0x8>;
bootph-pre-ram;
};
+};

2.40.0

-- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D

Bryan Brattlof

8:01 p.m.

New subject: [PATCH v3 4/5] configs: enable net features for am62ax

Enable DMA and CPSW options we now support for the am62ax SoC family

Signed-off-by: Bryan Brattlof bb@ti.com --- configs/am62ax_evm_a53_defconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/configs/am62ax_evm_a53_defconfig b/configs/am62ax_evm_a53_defconfig index 46a95a692e9ac..e17bfd4dd2936 100644 --- a/configs/am62ax_evm_a53_defconfig +++ b/configs/am62ax_evm_a53_defconfig @@ -40,7 +40,6 @@ CONFIG_SPL_OF_CONTROL=y CONFIG_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y -# CONFIG_NET is not set CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y @@ -49,15 +48,20 @@ CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_TI_SCI=y +CONFIG_DMA_CHANNELS=y +CONFIG_TI_K3_NAVSS_UDMA=y CONFIG_TI_SCI_PROTOCOL=y # CONFIG_GPIO is not set # CONFIG_I2C is not set CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y +# CONFIG_SPL_MISC is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ADMA=y CONFIG_SPL_MMC_SDHCI_ADMA=y CONFIG_MMC_SDHCI_AM654=y +CONFIG_PHY_TI_DP83867=y +CONFIG_TI_AM65_CPSW_NUSS=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_SINGLE=y

-- 2.40.0

Bryan Brattlof

8:01 p.m.

New subject: [PATCH v3 5/5] configs: am62ax: enable ymodem support for a53 spl

Automated testing inside TI currently relies on loading the boot-loaders into the SoC via UART. Enable SPL_YMODEM_SUPPORT so our testing infrastructure can boot (and test) our boards.

Fixes: 719bd650c30e8 ("configs: introduce configs for the am62a") Signed-off-by: Bryan Brattlof bb@ti.com --- configs/am62ax_evm_a53_defconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/configs/am62ax_evm_a53_defconfig b/configs/am62ax_evm_a53_defconfig index e17bfd4dd2936..10c9d5268c846 100644 --- a/configs/am62ax_evm_a53_defconfig +++ b/configs/am62ax_evm_a53_defconfig @@ -34,6 +34,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_POWER_DOMAIN=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_MMC=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y

-- 2.40.0

Nishanth Menon

8:14 p.m.

On 13:01-20230414, Bryan Brattlof wrote:

...

Hello again everyone!

This patch series syncs TI's am62ax device tree files with what has been merged in the v6.3-rc6 of the Linux Kernel. This series will also enable YMODEM support to make automated testing (which uses the UART boot method to load the bootloaders into the SoC)

Thanks for reviewing ~Bryan

Changes from v2: [1]

pulled linux dtbs from v6.3-rc6 instead of -rc4

Changed from v1: [0]

Rebased on top of -next branch

dropped 'u-boot,dm-spl' for the new 'bootph-pre-ram' properties

[0] https://lore.kernel.org/u-boot/20230327184035.2128786-1-bb@ti.com/ [1] https://lore.kernel.org/u-boot/20230402213617.1759491-1-bb@ti.com/

Bryan Brattlof (4): arm: dts: sync am62ax dtbs with linux v6.3-rc6 arm: dts: add DMA and CPSW nodes for uboot configs: enable net features for am62ax configs: am62ax: enable ymodem support for a53 spl

Vignesh Raghavendra (1): dma: ti: k3-udma: Introduce DMA support for the am62ax

arch/arm/dts/k3-am62a-main.dtsi | 365 ++++++++++++++++++++++++++ arch/arm/dts/k3-am62a-mcu.dtsi | 51 ++++ arch/arm/dts/k3-am62a-wakeup.dtsi | 2 +- arch/arm/dts/k3-am62a7-r5-sk.dts | 8 +

NAK - not complete.

This needs to drop everything duplicate => why is memory reserved-memory duplicate? chosen....

Please send the uart pinmux patches upstream.

Remember: board.dts - included by u-boot.dtsi -> included by r5.dtsi

there is 0 need to duplicate stuff.

...

arch/arm/dts/k3-am62a7-sk-u-boot.dtsi | 26 +- arch/arm/dts/k3-am62a7-sk.dts | 75 +++++- arch/arm/dts/k3-am62a7.dtsi | 1 + configs/am62ax_evm_a53_defconfig | 7 +- drivers/dma/ti/Makefile | 1 + drivers/dma/ti/k3-psil-am62a.c | 196 ++++++++++++++ drivers/dma/ti/k3-psil-priv.h | 1 + drivers/dma/ti/k3-psil.c | 2 + 12 files changed, 729 insertions(+), 6 deletions(-) create mode 100644 drivers/dma/ti/k3-psil-am62a.c

base-commit: a25dcda452bf6a6de72764a8d990d72e5def643d

2.40.0

-- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D

760

Age (days ago)

760

Last active (days ago)

List overview

Download

7 comments

2 participants

tags (0)

participants (2)

Bryan Brattlof
Nishanth Menon