Hello

I'm having some trouble whit Micro-Blox LPC 2478. I'm loading uLinux.bin to the flash address 80000000 and cramfs.img to the addres 80200000. This is oke but when it extracts to the ram i suppose then its starts at address a1500000 for the linux and at address a1800000 for the romfs.img but the romfs image is more than 2 mbyte because the ram is only 32 mbyte so it doesn't fit in the ram. How can i change where to extract the linux kernel and the file system, and mount to linux ? Thanx.

********************************************** * LPC2478 Micro-Blox Board from * * Future Electronics * * Version: 1.0 * ********************************************** Booting (may take some time)...

U-Boot 1.1.6 (Feb 7 2009 - 17:03:58) DRAM: 32 MB Flash: 4.5 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 LPC2478_Micro-Blox # print bootdelay=3 baudrate=115200 tftp_boot=tftpboot a1500000 uLinux.bin;tftpboot a1800000 romfs.img;bootm a150000 0 nor_boot=bootm 80000000 mmc_boot=mmc;fatload mmc 0 a1500000 uLinux.bin;fatload mmc 0 a1800000 romfs.img; bootm a1500000 update_uboot=tftpboot a1000000 u-boot.bin;protect off 0 2ffff;erase 0 2ffff;cp.b a1000000 0 $(filesize) update_nor=erase bank 2;tftpboot a0000000 uLinux.bin;cp.b $(fileaddr) 80000000 $ (filesize);tftpboot a0000000 cramfs.img;cp.b $(fileaddr) 80200000 $(filesize) alt_bootargs=root=/dev/ram initrd=0xa1800000,4000k console=ttyS0,115200N8 ethaddr=00:1a:f1:00:00:00 bootcmd=bootm 80000000 update_nor2=erase bank 2 bootargs=root=/dev/mtdblock1 console=ttyS0,115200N8 stdin=serial stdout=serial stderr=serial filesize=11a000 fileaddr=A0000000 gatewayip=192.168.0.1 netmask=255.255.255.0 ipaddr=192.168.0.211 serverip=192.168.0.107

Environment size: 854/4092 bytes LPC2478_Micro-Blox #

********************************************** * LPC2478 Micro-Blox Board from * * Future Electronics * * Version: 1.0 * ********************************************** Booting (may take some time)...

U-Boot 1.1.6 (Feb 7 2009 - 17:03:58) DRAM: 32 MB Flash: 4.5 MB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 ## Booting image at 80000000 ... Image Name: Linux 2.6.21 Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 1107660 Bytes = 1.1 MB Load Address: a0008000 Entry Point: a0008000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK

Starting kernel ...

ýLinux version 2.6.21-uc0 (szempy@localhost.localdomain) (gcc version 3.4.4) #7 Thu Apr 9 11:42:55 EEST 2009 CPU: NXP-LPC2478 [1701ff35] revision 5 (ARMv4), cr=a0232040 Machine: Future Electronics LPC2478 Micro-Blox Board Ignoring unrecognised tag 0x00000000 Built 1 zonelists. Total pages: 8128 Kernel command line: root=/dev/mtdblock1 console=ttyS0,115200N8 PID hash table entries: 128 (order: 7, 512 bytes) LPC2XXX Clocking Fin=12000000Hz Fcco=288000000Hz M=11 N=0 Fcclk=72000000 PCLKSEL=55515555 11555455 Console: colour dummy device 80x30 Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 32MB = 32MB total Memory: 30132KB available (2012K code, 224K data, 104K init) Mount-cache hash table entries: 512 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc. io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xe000c000 (irq = 6) is a 16550A serial8250.0: ttyS1 at MMIO 0xe0010000 (irq = 7) is a 16550A serial8250.0: ttyS2 at MMIO 0xe0078000 (irq = 28) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) lpc2xxx_eth_probe lpc2xxx_eth_setup get_mac_address ethaddr=00:1a:f1:00:00:00 eth0: Link down. eth0: LPC2xxx ethernet at 0xffe00000 int=21 10-HalfDuplex (00:1a:f1:00:00:00) eth0: National DP83640 PHY at 1 Found: SST 39VF6401 lpc24xx-ea-flash: Found 1 x16 devices at 0x0 in 16-bit bank number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 2 MTD partitions on "lpc24xx-ea-flash": 0x00000000-0x00200000 : "kernel" 0x00200000-0x00800000 : "rootfs" lpc2xxx-spi lpc2xxx-spi: registering nl2432hcc-41k lpc24xx-ohci lpc24xx-ohci: LPC24xx OHCI lpc24xx-ohci lpc24xx-ohci: new USB bus registered, assigned bus number 1 lpc24xx-ohci lpc24xx-ohci: irq 22, io mem 0xffe0c000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver lpc2xxx-rtc lpc2xxx-rtc: rtc core: registered lpc2xxx-rtc as rtc0 lpc2xxx-rtc: RTC driver for NXP LPC2XXX. i2c /dev entries driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 15 lpc2xxx-rtc lpc2xxx-rtc: hctosys: invalid date/time VFS: Mounted root (cramfs filesystem) readonly. serial_link_irq_chain irq=6 00000000 serial_link_irq_chain request_irq(6,...) cramfs: bad compressed blocksize 4293812255 cramfs: bad compressed blocksize 4293832399 cramfs: bad compressed blocksize 4293833299