From: Madan Srinivas madans@ti.com

An issue in the TI secure image generation tool causes the ROM to load the SPL at a different load address than what is specified by CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot.

This causes the SPL to fail on secure devices during peripheral boot.

The TI secure image generation tool has been fixed so that the SPL will always be loaded at 0x403018E0 by the ROM code for both peripheral and memory boot modes. am43x hs defconfig file have been updated to reflect this change.

Signed-off-by: Madan Srinivas madans@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- configs/am43xx_hs_evm_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 1c53877..7d791fe 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_AM43XX=y CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_AM43XX_EVM=y -CONFIG_ISW_ENTRY_ADDR=0x40302ae0 +CONFIG_ISW_ENTRY_ADDR=0x403018e0 CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"