From: "mario.six@gdsys.cc" mario.six@gdsys.cc

This patch adds a driver for the built-in GPIO controller of the MPC85XX SoC (probably supporting other PowerQUICC III SoCs as well).

Each GPIO bank is identified by its own entry in the device tree, i.e.

gpio-controller@fc00 { #gpio-cells = <2>; compatible = "fsl,pq3-gpio"; reg = <0xfc00 0x100> }

By default, each bank is assumed to have 32 GPIOs, but the ngpios setting is honored, so the number of GPIOs for each bank in configurable to match the actual GPIO count of the SoC (e.g. the 32/32/23 banks of the P1022 SoC).

The usual functions of GPIO drivers (setting input/output mode and output value setting) are supported.

The driver has been tested on MPC85XX, but it is likely that other PowerQUICC III devices will work as well.

Signed-off-by: Mario Six mario.six@gdsys.cc ---

v3: - Added shadow for the GPDAT register, as suggested by Joakim Tjernlund - Switched to u32 for bit masks - Added some comments

v2: - Added missing commit message - Improved the Kconfig description - Fixed and documented the mpc85xx_gpio_data members - Introduced GPIO_MASK macro to simplify the code - Fixed white space issues in function headers - Removed unnecessary empty line - Use fdtdec_get_addr_size_auto_noparent to read the register base data

--- arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 2 + arch/powerpc/include/asm/immap_85xx.h | 2 + drivers/gpio/Kconfig | 25 ++++ drivers/gpio/Makefile | 1 + drivers/gpio/mpc85xx_gpio.c | 187 +++++++++++++++++++++++++++ 5 files changed, 217 insertions(+) create mode 100644 drivers/gpio/mpc85xx_gpio.c

diff --git a/arch/powerpc/include/asm/arch-mpc85xx/gpio.h b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h index da7352a..41b6677 100644 --- a/arch/powerpc/include/asm/arch-mpc85xx/gpio.h +++ b/arch/powerpc/include/asm/arch-mpc85xx/gpio.h @@ -14,6 +14,8 @@ #ifndef __ASM_ARCH_MX85XX_GPIO_H #define __ASM_ARCH_MX85XX_GPIO_H

+#ifndef CONFIG_MPC85XX_GPIO #include <asm/mpc85xx_gpio.h> +#endif

#endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 53ca6d9..dcc50b2 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -265,6 +265,7 @@ typedef struct ccsr_pcix { #define PIWAR_WRITE_SNOOP 0x00005000 #define PIWAR_MEM_2G 0x0000001e

+#ifndef CONFIG_MPC85XX_GPIO typedef struct ccsr_gpio { u32 gpdir; u32 gpodr; @@ -273,6 +274,7 @@ typedef struct ccsr_gpio { u32 gpimr; u32 gpicr; } ccsr_gpio_t; +#endif

/* L2 Cache Registers */ typedef struct ccsr_l2cache { diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 2b4624d..068ee63 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -143,4 +143,29 @@ config ZYNQ_GPIO help Supports GPIO access on Zynq SoC.

+config MPC85XX_GPIO + bool "Freescale MPC85XX GPIO driver" + depends on DM_GPIO + help + This driver supports the built-in GPIO controller of MPC85XX CPUs. + Each GPIO bank is identified by its own entry in the device tree, + i.e. + + gpio-controller@fc00 { + #gpio-cells = <2>; + compatible = "fsl,pq3-gpio"; + reg = <0xfc00 0x100> + } + + By default, each bank is assumed to have 32 GPIOs, but the ngpios + setting is honored, so the number of GPIOs for each bank is + configurable to match the actual GPIO count of the SoC (e.g. the + 32/32/23 banks of the P1022 SoC). + + The standard functions of input/output mode, and output value setting + are supported; the open-drain capability of the controller is not + supported yet. + + The driver has been tested on MPC85XX, but it is likely that other + PowerQUICC III devices will work as well. endmenu diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 4f071c4..1e4f16b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o obj-$(CONFIG_DM644X_GPIO) += da8xx_gpio.o obj-$(CONFIG_ALTERA_PIO) += altera_pio.o obj-$(CONFIG_MPC83XX_GPIO) += mpc83xx_gpio.o +obj-$(CONFIG_MPC85XX_GPIO) += mpc85xx_gpio.o obj-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o obj-$(CONFIG_OMAP_GPIO) += omap_gpio.o obj-$(CONFIG_DB8500_GPIO) += db8500_gpio.o diff --git a/drivers/gpio/mpc85xx_gpio.c b/drivers/gpio/mpc85xx_gpio.c new file mode 100644 index 0000000..17755df --- /dev/null +++ b/drivers/gpio/mpc85xx_gpio.c @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2016 + * Mario Six, Guntermann & Drunck GmbH, six@gdsys.de + * + * based on arch/powerpc/include/asm/mpc85xx_gpio.h, which is + * + * Copyright 2010 eXMeritus, A Boeing Company + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <asm/gpio.h> +#include <mapmem.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct ccsr_gpio { + u32 gpdir; + u32 gpodr; + u32 gpdat; + u32 gpier; + u32 gpimr; + u32 gpicr; +}; + +struct mpc85xx_gpio_data { + /* The bank's register base in memory */ + struct ccsr_gpio __iomem *base; + /* The address of the registers; used to identify the bank */ + ulong addr; + /* The GPIO count of the bank */ + uint gpio_count; + /* The GPDAT register cannot be used to determine the value of output + * pins on MPC8572/MPC8536, so we shadow it and use the shadowed value + * for output pins */ + u32 dat_shadow; +}; + +inline u32 gpio_mask(unsigned gpio) { + return (1U << (31 - (gpio))); +} + +static inline u32 mpc85xx_gpio_get_val(struct ccsr_gpio *base, u32 mask) +{ + return in_be32(&base->gpdat) & mask; +} + +static inline u32 mpc85xx_gpio_get_dir(struct ccsr_gpio *base, u32 mask) +{ + return in_be32(&base->gpdir) & mask; +} + +static inline void mpc85xx_gpio_set_in(struct ccsr_gpio *base, u32 gpios) +{ + clrbits_be32(&base->gpdat, gpios); + /* GPDIR register 0 -> input */ + clrbits_be32(&base->gpdir, gpios); +} + +static inline void mpc85xx_gpio_set_low(struct ccsr_gpio *base, u32 gpios) +{ + clrbits_be32(&base->gpdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be32(&base->gpdir, gpios); +} + +static inline void mpc85xx_gpio_set_high(struct ccsr_gpio *base, u32 gpios) +{ + setbits_be32(&base->gpdat, gpios); + /* GPDIR register 1 -> output */ + setbits_be32(&base->gpdir, gpios); +} + +static int mpc85xx_gpio_direction_input(struct udevice *dev, unsigned gpio) +{ + struct mpc85xx_gpio_data *data = dev_get_priv(dev); + + mpc85xx_gpio_set_in(data->base, gpio_mask(gpio)); + return 0; +} + +static int mpc85xx_gpio_set_value(struct udevice *dev, unsigned gpio, + int value) +{ + struct mpc85xx_gpio_data *data = dev_get_priv(dev); + + if (value) { + data->dat_shadow |= gpio_mask(gpio); + mpc85xx_gpio_set_high(data->base, gpio_mask(gpio)); + } else { + data->dat_shadow &= ~gpio_mask(gpio); + mpc85xx_gpio_set_low(data->base, gpio_mask(gpio)); + } + return 0; +} + +static int mpc85xx_gpio_direction_output(struct udevice *dev, unsigned gpio, + int value) +{ + return mpc85xx_gpio_set_value(dev, gpio, value); +} + +static int mpc85xx_gpio_get_value(struct udevice *dev, unsigned gpio) +{ + struct mpc85xx_gpio_data *data = dev_get_priv(dev); + + if (!!mpc85xx_gpio_get_dir(data->base, gpio_mask(gpio))) { + /* Output -> use shadowed value */ + return !!(data->dat_shadow & gpio_mask(gpio)); + } else { + /* Input -> read value from GPDAT register */ + return !!mpc85xx_gpio_get_val(data->base, gpio_mask(gpio)); + } +} + +static int mpc85xx_gpio_get_function(struct udevice *dev, unsigned gpio) +{ + struct mpc85xx_gpio_data *data = dev_get_priv(dev); + int dir; + + dir = !!mpc85xx_gpio_get_dir(data->base, gpio_mask(gpio)); + return dir ? GPIOF_OUTPUT : GPIOF_INPUT; +} + +static int mpc85xx_gpio_ofdata_to_platdata(struct udevice *dev) { + struct mpc85xx_gpio_data *data = dev_get_priv(dev); + fdt_addr_t addr; + fdt_size_t size; + + addr = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, dev->of_offset, + "reg", 0, &size); + + data->addr = addr; + data->base = map_sysmem(CONFIG_SYS_IMMR + addr, size); + + if (!data->base) + return -ENOMEM; + + data->gpio_count = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "ngpios", 32); + data->dat_shadow = 0; + + return 0; +} + +static int mpc85xx_gpio_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct mpc85xx_gpio_data *data = dev_get_priv(dev); + char name[32], *str; + + snprintf(name, sizeof(name), "MPC@%lx_", data->addr); + str = strdup(name); + + if (!str) + return -ENOMEM; + + uc_priv->bank_name = str; + uc_priv->gpio_count = data->gpio_count; + + return 0; +} + +static const struct dm_gpio_ops gpio_mpc85xx_ops = { + .direction_input = mpc85xx_gpio_direction_input, + .direction_output = mpc85xx_gpio_direction_output, + .get_value = mpc85xx_gpio_get_value, + .set_value = mpc85xx_gpio_set_value, + .get_function = mpc85xx_gpio_get_function, +}; + +static const struct udevice_id mpc85xx_gpio_ids[] = { + { .compatible = "fsl,pq3-gpio" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(gpio_mpc85xx) = { + .name = "gpio_mpc85xx", + .id = UCLASS_GPIO, + .ops = &gpio_mpc85xx_ops, + .ofdata_to_platdata = mpc85xx_gpio_ofdata_to_platdata, + .of_match = mpc85xx_gpio_ids, + .probe = mpc85xx_gpio_probe, + .priv_auto_alloc_size = sizeof(struct mpc85xx_gpio_data), +}; -- 2.7.0.GIT

From: "mario.six@gdsys.cc" mario.six@gdsys.cc

Certain GPIO devices have the capability to switch their GPIOs into open-drain mode, that is, instead of actively driving the output (Push-pull output), the pin is connected to the collector (for a NPN transistor) or the drain (for a MOSFET) of a transistor, respectively. The pin then either forms an open circuit or a connection to ground, depending on the state of the transistor.

This patch adds functions to the GPIO uclass to switch GPIOs to open-drain mode on devices that support it.

Signed-off-by: Mario Six mario.six@gdsys.cc ---

v2: - Added missing commit message - Fixed error return value of dm_gpio_get_open_drain - Fixed return value passing in dm_gpio_set_open_drain and added comment - Added description of open-drain mode

--- drivers/gpio/gpio-uclass.c | 32 ++++++++++++++++++++++++++++++++ include/asm-generic/gpio.h | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+)

diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index b58d4e6..1be9988 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -352,6 +352,38 @@ int dm_gpio_set_value(const struct gpio_desc *desc, int value) return 0; }

+int dm_gpio_get_open_drain(struct gpio_desc *desc) +{ + struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); + int ret; + + ret = check_reserved(desc, "get_open_drain"); + if (ret) + return ret; + + if (ops->set_open_drain) + return ops->get_open_drain(desc->dev, desc->offset); + else + return -ENOSYS; +} + +int dm_gpio_set_open_drain(struct gpio_desc *desc, int value) +{ + struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); + int ret; + + ret = check_reserved(desc, "set_open_drain"); + if (ret) + return ret; + + if (ops->set_open_drain) + ret = ops->set_open_drain(desc->dev, desc->offset, value); + else + return 0; /* feature not supported -> ignore setting */ + + return ret; +} + int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags) { struct udevice *dev = desc->dev; diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 68b5f0b..ece7552 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -241,6 +241,8 @@ struct dm_gpio_ops { int value); int (*get_value)(struct udevice *dev, unsigned offset); int (*set_value)(struct udevice *dev, unsigned offset, int value); + int (*get_open_drain)(struct udevice *dev, unsigned offset); + int (*set_open_drain)(struct udevice *dev, unsigned offset, int value); /** * get_function() Get the GPIO function * @@ -541,6 +543,38 @@ int dm_gpio_get_value(const struct gpio_desc *desc); int dm_gpio_set_value(const struct gpio_desc *desc, int value);

/** + * dm_gpio_get_open_drain() - Check if open-drain-mode of a GPIO is active + * + * This checks if open-drain-mode for a GPIO is enabled or not. This method is + * optional. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return Value of open drain mode for GPIO (0 for inactive, 1 for active) or + * -ve on error + */ +int dm_gpio_get_open_drain(struct gpio_desc *desc); + +/** + * dm_gpio_set_open_drain() - Switch open-drain-mode of a GPIO on or off + * + * This enables or disables open-drain mode for a GPIO. This method is + * optional; if the driver does not support it, nothing happens when the method + * is called. + * + * In open-drain mode, instead of actively driving the output (Push-pull + * output), the GPIO's pin is connected to the collector (for a NPN transistor) + * or the drain (for a MOSFET) of a transistor, respectively. The pin then + * either forms an open circuit or a connection to ground, depending on the + * state of the transistor. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return 0 if OK, -ve on error + */ +int dm_gpio_set_open_drain(struct gpio_desc *desc, int value); + +/** * dm_gpio_set_dir() - Set the direction for a GPIO * * This sets up the direction according tot the provided flags. It will do -- 2.7.0.GIT