Secure memory is at the end of memory, separated and reserved from OS, tracked by gd->secure_ram. Secure memory can host MMU tables, security monitor, etc. This is different from PRAM used to reserve private memory. PRAM offers memory at the top of u-boot memory, not necessarily the real end of memory for systems with very large DDR. Using the end of memory simplifies MMU setup and avoid memory fragmentation.

"bdinfo" command shows gd->secure_ram value if this memory is marked as secured.

Signed-off-by: York Sun yorksun@freescale.com

---

Changes in v7: None Changes in v6: Move cmd_bdinfo change into this patch Move flag macros and comments of secure_ram into this patch

Changes in v5: None Changes in v4: None Changes in v3: Put ifdef around secure_ram Move defining CONFIG_SYS_MEM_RESERVE_SECURE to patch 2/2

Changes in v2: Do not use CONFIG_SYS_MEM_TOP_HIDE mechanism

Changes in v1: Initial patch. Depends on http://patchwork.ozlabs.org/patch/540248/

README | 8 ++++++++ common/board_f.c | 9 +++++++++ common/cmd_bdinfo.c | 6 ++++++ include/asm-generic/global_data.h | 14 ++++++++++++++ 4 files changed, 37 insertions(+)

diff --git a/README b/README index 4fee706..6ea1af2 100644 --- a/README +++ b/README @@ -3869,6 +3869,14 @@ Configuration Settings: Scratch address used by the alternate memory test You only need to set this if address zero isn't writeable

+- CONFIG_SYS_MEM_RESERVE_SECURE + If defined, the size of CONFIG_SYS_MEM_RESERVE_SECURE memory + is substracted from total RAM and won't be reported to OS. + This memory can be used as secure memory. A variable + gd->secure_ram is used to track the location. In systems + the RAM base is not zero, or RAM is divided into banks, + this variable needs to be recalcuated to get the address. + - CONFIG_SYS_MEM_TOP_HIDE (PPC only): If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, this specified memory area will get subtracted from the top diff --git a/common/board_f.c b/common/board_f.c index b035c90..e13657f 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -324,6 +324,15 @@ static int setup_dest_addr(void) * Ram is setup, size stored in gd !! */ debug("Ram size: %08lX\n", (ulong)gd->ram_size); +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + /* Reserve memory for secure MMU tables, and/or security monitor */ + gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE; + /* + * Record secure memory location. Need recalcuate if memory splits + * into banks, or the ram base is not zero. + */ + gd->secure_ram = gd->ram_size; +#endif #if defined(CONFIG_SYS_MEM_TOP_HIDE) /* * Subtract specified amount of memory to hide so that it won't diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index adda55a..deed6d8 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -382,6 +382,12 @@ static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, print_num("-> size", bd->bi_dram[i].size); }

+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + if (gd->secure_ram & MEM_RESERVE_SECURE_SECURED) { + print_num("Secure ram", + gd->secure_ram & MEM_RESERVE_SECURE_ADDR_MASK); + } +#endif #if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH) print_eths(); #endif diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 1abdcaa..5d8b043 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -59,6 +59,20 @@ typedef struct global_data {

unsigned long relocaddr; /* Start address of U-Boot in RAM */ phys_size_t ram_size; /* RAM size */ +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#define MEM_RESERVE_SECURE_SECURED 0x1 +#define MEM_RESERVE_SECURE_MAINTAINED 0x2 +#define MEM_RESERVE_SECURE_ADDR_MASK (~0x3) + /* + * Secure memory addr + * This variable needs maintenance if the RAM base is not zero, + * or if RAM splits into non-consecutive banks. It also has a + * flag indicating the secure memory is marked as secure by MMU. + * Flags used: 0x1 secured + * 0x2 maintained + */ + phys_addr_t secure_ram; +#endif unsigned long mon_len; /* monitor len */ unsigned long irq_sp; /* irq stack pointer */ unsigned long start_addr_sp; /* start_addr_stackpointer */

DDR has been set as secure in MMU tables. Non-secure master such as SDHC DMA cannot access data correctly. Mixing secure and non- secure MMU entries requirs the MMU tables themselves in secure memory. This patch moves MMU tables into a secure DDR area.

Early MMU tables are changed to set DDR as non-secure. A new table is added into final MMU tables so secure memory can have 2MB granuality.

gd->secure_ram tracks the location of this secure memory. For ARMv8 SoCs, the RAM base is not zero and RAM is divided into several banks. gd->secure_ram needs to be maintained before using. This maintenance is board-specific, depending on the SoC and memory bank of the secure memory falls into.

Signed-off-by: York Sun yorksun@freescale.com

---

Changes in v7: Rebase to recent master Update ls1043ardb ddr.c Add change to ls1043qds ddr.c Check exception level before setting secure memory Leave gd->arch.tlb_addr unused if secure memory is setup

Changes in v6: Move cmd_bdinfo change to 1st patch in this set Rearrange #ifdef CONFIG_SYS_MEM_RESERVE_SECURE

Changes in v5: Put ifdef where gd->secure_ram is used

Changes in v4: Drop RFC from patch prefix Drop excessive mmu table for secure ram for early MMU Update commit message accordingly Mark QBMan cacheable portal memory non-secure

Changes in v3: Replace CONFIG_FSL_PPA_RESERVED_DRAM_SIZE with CONFIG_SYS_MEM_RESERVE_SECURE Sanity check gd->secure_ram before using Define CONFIG_SYS_MEM_RESERVE_SECURE in SoC header file Include ls1043ardb Modified commit message.

Changes in v2: Move gd->arch.secure_ram to gd->secure_ram. Change the calculation of gd->secure_ram accordingly. Chnage commit message slightly accordingly.

Changes in v1: None

arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 121 ++++++++++++++++++--- arch/arm/include/asm/arch-fsl-layerscape/config.h | 6 + arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 14 ++- board/freescale/ls1043aqds/ddr.c | 9 ++ board/freescale/ls1043ardb/ddr.c | 15 +++ board/freescale/ls2080a/ddr.c | 15 +++ board/freescale/ls2080aqds/ddr.c | 15 +++ board/freescale/ls2080ardb/ddr.c | 15 +++ 8 files changed, 191 insertions(+), 19 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 8847fc0..87ccaf1 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -206,11 +206,65 @@ static inline void early_mmu_setup(void) set_sctlr(get_sctlr() | CR_M); }

+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +/* + * Called from final mmu setup. The phys_addr is new, non-existing + * address. A new sub table is created @level2_table_secure to cover + * size of CONFIG_SYS_MEM_RESERVE_SECURE memory. + */ +static inline int final_secure_ddr(u64 *level0_table, + u64 *level2_table_secure, + phys_addr_t phys_addr) +{ + int ret = -EINVAL; + struct table_info table = {}; + struct sys_mmu_table ddr_entry = { + 0, 0, BLOCK_SIZE_L1, MT_NORMAL, + PMD_SECT_OUTER_SHARE | PMD_SECT_NS + }; + u64 index; + + /* Need to create a new table */ + ddr_entry.virt_addr = phys_addr & ~(BLOCK_SIZE_L1 - 1); + ddr_entry.phys_addr = phys_addr & ~(BLOCK_SIZE_L1 - 1); + ret = find_table(&ddr_entry, &table, level0_table); + if (ret) + return ret; + index = (ddr_entry.virt_addr - table.table_base) >> SECTION_SHIFT_L1; + set_pgtable_table(table.ptr, index, level2_table_secure); + table.ptr = level2_table_secure; + table.table_base = ddr_entry.virt_addr; + table.entry_size = BLOCK_SIZE_L2; + ret = set_block_entry(&ddr_entry, &table); + if (ret) { + printf("MMU error: could not fill non-secure ddr block entries\n"); + return ret; + } + ddr_entry.virt_addr = phys_addr; + ddr_entry.phys_addr = phys_addr; + ddr_entry.size = CONFIG_SYS_MEM_RESERVE_SECURE; + ddr_entry.attribute = PMD_SECT_OUTER_SHARE; + ret = find_table(&ddr_entry, &table, level0_table); + if (ret) { + printf("MMU error: could not find secure ddr table\n"); + return ret; + } + ret = set_block_entry(&ddr_entry, &table); + if (ret) + printf("MMU error: could not set secure ddr block entry\n"); + + return ret; +} +#endif + /* * The final tables look similar to early tables, but different in detail. * These tables are in DRAM. Sub tables are added to enable cache for * QBMan and OCRAM. * + * Put the MMU table in secure memory if gd->secure_ram is valid. + * OCRAM will be not used for this purpose so gd->secure_ram can't be 0. + * * Level 1 table 0 contains 512 entries for each 1GB from 0 to 512GB. * Level 1 table 1 contains 512 entries for each 1GB from 512GB to 1TB. * Level 2 table 0 contains 512 entries for each 2MB from 0 to 1GB. @@ -223,18 +277,40 @@ static inline void early_mmu_setup(void) */ static inline void final_mmu_setup(void) { - unsigned int el, i; + unsigned int el = current_el(); + unsigned int i; u64 *level0_table = (u64 *)gd->arch.tlb_addr; - u64 *level1_table0 = (u64 *)(gd->arch.tlb_addr + 0x1000); - u64 *level1_table1 = (u64 *)(gd->arch.tlb_addr + 0x2000); - u64 *level2_table0 = (u64 *)(gd->arch.tlb_addr + 0x3000); -#ifdef CONFIG_FSL_LSCH3 - u64 *level2_table1 = (u64 *)(gd->arch.tlb_addr + 0x4000); -#elif defined(CONFIG_FSL_LSCH2) - u64 *level2_table1 = (u64 *)(gd->arch.tlb_addr + 0x4000); - u64 *level2_table2 = (u64 *)(gd->arch.tlb_addr + 0x5000); + u64 *level1_table0; + u64 *level1_table1; + u64 *level2_table0; + u64 *level2_table1; +#ifdef CONFIG_FSL_LSCH2 + u64 *level2_table2; #endif - struct table_info table = {level0_table, 0, BLOCK_SIZE_L0}; + struct table_info table = {NULL, 0, BLOCK_SIZE_L0}; + +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + u64 *level2_table_secure; + + if (el == 3) { + /* + * Only use gd->secure_ram if the address is recalculated + * Align to 4KB for MMU table + */ + if (gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED) + level0_table = (u64 *)(gd->secure_ram & ~0xfff); + else + printf("MMU warning: gd->secure_ram is not maintained, disabled.\n"); + } +#endif + level1_table0 = level0_table + 512; + level1_table1 = level1_table0 + 512; + level2_table0 = level1_table1 + 512; + level2_table1 = level2_table0 + 512; +#ifdef CONFIG_FSL_LSCH2 + level2_table2 = level2_table1 + 512; +#endif + table.ptr = level0_table;

/* Invalidate all table entries */ memset(level0_table, 0, PGTABLE_SIZE); @@ -269,17 +345,34 @@ static inline void final_mmu_setup(void) &final_mmu_table[i]); } } + /* Set the secure memory to secure in MMU */ +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + if (el == 3 && gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED) { +#ifdef CONFIG_FSL_LSCH3 + level2_table_secure = level2_table1 + 512; +#elif defined(CONFIG_FSL_LSCH2) + level2_table_secure = level2_table2 + 512; +#endif + if (!final_secure_ddr(level0_table, + level2_table_secure, + gd->secure_ram & ~0x3)) { + gd->secure_ram |= MEM_RESERVE_SECURE_SECURED; + debug("Now MMU table is in secured memory at 0x%llx\n", + gd->secure_ram & ~0x3); + } else { + printf("MMU warning: Failed to secure DDR\n"); + } + } +#endif

/* flush new MMU table */ - flush_dcache_range(gd->arch.tlb_addr, - gd->arch.tlb_addr + gd->arch.tlb_size); + flush_dcache_range((ulong)level0_table, + (ulong)level0_table + gd->arch.tlb_size);

#ifdef CONFIG_SYS_DPAA_FMAN flush_dcache_all(); #endif /* point TTBR to the new table */ - el = current_el(); - set_ttbr_tcr_mair(el, (u64)level0_table, LAYERSCAPE_TCR_FINAL, MEMORY_ATTRIBUTES); /* diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index f2b4d93..6e5224e 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -17,6 +17,12 @@ #define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */ #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0

+/* + * Reserve secure memory + * To be aligned with MMU block size + */ +#define CONFIG_SYS_MEM_RESERVE_SECURE (2048 * 1024) /* 2MB */ + #if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A) #define CONFIG_MAX_CPUS 16 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 4544094..e030430 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -129,7 +129,8 @@ static const struct sys_mmu_table early_mmu_table[] = { { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_SIZE1, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE }, { CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1, - CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE }, + CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, + PMD_SECT_OUTER_SHARE | PMD_SECT_NS }, /* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */ { CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2, @@ -138,7 +139,8 @@ static const struct sys_mmu_table early_mmu_table[] = { CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN }, { CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2, - CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE }, + CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, + PMD_SECT_OUTER_SHARE | PMD_SECT_NS }, #elif defined(CONFIG_FSL_LSCH2) { CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, @@ -165,7 +167,8 @@ static const struct sys_mmu_table final_mmu_table[] = { { CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE }, { CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1, - CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE }, + CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, + PMD_SECT_OUTER_SHARE | PMD_SECT_NS }, { CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN }, @@ -183,7 +186,7 @@ static const struct sys_mmu_table final_mmu_table[] = { /* For QBMAN portal, only the first 64MB is cache-enabled */ { CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_SIZE_1, MT_NORMAL, - PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN }, + PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN | PMD_SECT_NS }, { CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1, CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1, CONFIG_SYS_FSL_QBMAN_SIZE - CONFIG_SYS_FSL_QBMAN_SIZE_1, @@ -212,7 +215,8 @@ static const struct sys_mmu_table final_mmu_table[] = { CONFIG_SYS_FSL_PEBUF_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN }, { CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2, - CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE }, + CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, + PMD_SECT_OUTER_SHARE | PMD_SECT_NS }, #elif defined(CONFIG_FSL_LSCH2) { CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_SIZE, MT_DEVICE_NGNRNE, diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c index 705e384..42d9068 100644 --- a/board/freescale/ls1043aqds/ddr.c +++ b/board/freescale/ls1043aqds/ddr.c @@ -126,6 +126,15 @@ phys_size_t initdram(int board_type)

void dram_init_banksize(void) { + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c index 249d056..11bc0f2 100644 --- a/board/freescale/ls1043ardb/ddr.c +++ b/board/freescale/ls1043ardb/ddr.c @@ -186,13 +186,28 @@ phys_size_t initdram(int board_type)

void dram_init_banksize(void) { + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } } diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c index 47d73ef..56c5d96 100644 --- a/board/freescale/ls2080a/ddr.c +++ b/board/freescale/ls2080a/ddr.c @@ -175,14 +175,29 @@ void dram_init_banksize(void) phys_size_t dp_ddr_size; #endif

+ /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif }

#ifdef CONFIG_SYS_DP_DDR_BASE_PHY diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c index 7e67ee0..9fb5e11 100644 --- a/board/freescale/ls2080aqds/ddr.c +++ b/board/freescale/ls2080aqds/ddr.c @@ -175,14 +175,29 @@ void dram_init_banksize(void) phys_size_t dp_ddr_size; #endif

+ /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif }

#ifdef CONFIG_SYS_DP_DDR_BASE_PHY diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c index 76f3b59..6c19173 100644 --- a/board/freescale/ls2080ardb/ddr.c +++ b/board/freescale/ls2080ardb/ddr.c @@ -175,14 +175,29 @@ void dram_init_banksize(void) phys_size_t dp_ddr_size; #endif

+ /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif }

#ifdef CONFIG_SYS_DP_DDR_BASE_PHY