You cannot ping the bootloader, as far as I know. You can ping from u-boot, but not the other way around. Also, only one interface (TSEC1, TSEC2, or FEC) will be active at any one time, and only while u-boot is executing a network command.

On Fri, 10 Sep 2004 21:41:02 +0530, sivam mg.sivam@gdatech.co.in wrote:

Hi All,

I am trying to use both TSEC and FEC interface in MPC8540 in U-Boot . Is it possible for me to use both the interface in U-Boot and ping from outside thro' these 2 interfaces ?. Right now i could use only one interface i.e TSEC ?. Can anyone shed some light on this.

Thanks and Regards sivam

---

This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users