[U-Boot] [PATCH] debug_uart: Try not to use stack in printch
Spam detection software, running on the system "lists.denx.de", has identified this incoming email as possible spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see @@CONTACT_ADDRESS@@ for details.
Content preview: Previous change to create _printch causes the stack to be used, breaking printch before stack is available. Inline _printch to prevent this happening. Signed-off-by: Tim Chick tim.chick@mediatek.com --- [...]
Content analysis details: (6.3 points, 5.0 required)
pts rule name description ---- ---------------------- -------------------------------------------------- 0.7 RCVD_IN_XBL RBL: Received via a relay in Spamhaus XBL [188.29.165.105 listed in zen.spamhaus.org] 3.6 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL 1.6 RCVD_IN_BRBL_LASTEXT RBL: No description available. [188.29.165.105 listed in bb.barracudacentral.org] 0.4 RDNS_DYNAMIC Delivered to internal network by host with dynamic-looking rDNS
On Thu, Apr 06, 2017 at 04:32:41PM +0100, tim.chick wrote:
Spam detection software, running on the system "lists.denx.de", has identified this incoming email as possible spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see @@CONTACT_ADDRESS@@ for details.
Content preview: Previous change to create _printch causes the stack to be used, breaking printch before stack is available. Inline _printch to prevent this happening. Signed-off-by: Tim Chick tim.chick@mediatek.com --- [...]
Content analysis details: (6.3 points, 5.0 required)
pts rule name description
Applied to u-boot/master, thanks!
participants (2)
-
Tim Chick -
Tom Rini