There is no need to store the values written to the PMIC inside the 'reg' variable. Make it simpler by writing the values directly.

Signed-off-by: Fabio Estevam festevam@gmail.com --- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 595ad76bbe..636c008993 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -86,16 +86,13 @@ int power_init_board(void) pmic_reg_write(dev, PFUZE3000_LDOGCTL, reg);

/* SW1B step ramp up time from 2us to 4us/25mV */ - reg = 0x40; - pmic_reg_write(dev, PFUZE3000_SW1BCONF, reg); + pmic_reg_write(dev, PFUZE3000_SW1BCONF, 0x40);

/* SW1B mode to APS/PFM */ - reg = 0xc; - pmic_reg_write(dev, PFUZE3000_SW1BMODE, reg); + pmic_reg_write(dev, PFUZE3000_SW1BMODE, 0xc);

/* SW1B standby voltage set to 0.975V */ - reg = 0xb; - pmic_reg_write(dev, PFUZE3000_SW1BSTBY, reg); + pmic_reg_write(dev, PFUZE3000_SW1BSTBY, 0xb);

return 0; }