This series supports Engicam i.CoreM6 QDL modules on top of u-boot-imx.git/next and test on the respective starter kits as well.

Changes for v3: - Remove "v2 01/17 imx: iomux-v3: Fix build error with snvs base" patch - Remove 'default n' on Kconfig DEFAULT_FDT_FILE patch - Add minimal devicetree support for Engicam i.CoreM6 QDL - Add is_mx6dl() - Add is_mx6solo() - Use is_mx6dq() - Add last commit sha1 and header in pull devicetree files from Linux

Changes for v2: - Make static to local iomux structure in board file - Corrected rowaddr in mx6_ddr3_cfg - Used imx_ddr_size - Add FEC support and tested the same - Add DM_GPIO, DM_MMC support - Add pinctrl support - Add devicetree support

Jagan Teki (16): serial: Kconfig: Add MXC_UART entry thermal: Kconfig: Add IMX_THERMAL entry Kconfig: Add DEFAULT_FDT_FILE entry arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support imx6: icorem6: Add ENET support imx: s/docs/README.imximage/doc/README.imximage/g arm: dts: Add devicetree for i.MX6DL arm: dts: Add devicetree for i.MX6DQL arm: dts: imx6dl: Add pinctrl defines dt-bindings: clock: imx6qdl: Add clock defines arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo imx6q: icorem6: Enable pinctrl driver engicam: icorem6: Add DM_GPIO, DM_MMC support arm: dts: Add devicetree for i.MX6Q arm: dts: imx6q: Add pinctrl defines arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual

arch/arm/cpu/armv7/mx6/Kconfig | 11 + arch/arm/dts/Makefile | 4 +- arch/arm/dts/imx6dl-icore.dts | 59 ++ arch/arm/dts/imx6dl-pinfunc.h | 1091 +++++++++++++++++++++++ arch/arm/dts/imx6dl.dtsi | 133 +++ arch/arm/dts/imx6q-icore.dts | 59 ++ arch/arm/dts/imx6q-pinfunc.h | 1047 ++++++++++++++++++++++ arch/arm/dts/imx6q.dtsi | 300 +++++++ arch/arm/dts/imx6qdl-icore.dtsi | 196 ++++ arch/arm/dts/imx6qdl.dtsi | 1281 +++++++++++++++++++++++++++ arch/arm/include/asm/imx-common/sys_proto.h | 2 + board/barco/titanium/imximage.cfg | 2 +- board/ccv/xpress/imximage.cfg | 2 +- board/denx/m53evk/imximage.cfg | 2 +- board/engicam/icorem6/Kconfig | 12 + board/engicam/icorem6/MAINTAINERS | 6 + board/engicam/icorem6/Makefile | 6 + board/engicam/icorem6/README | 38 + board/engicam/icorem6/icorem6.c | 474 ++++++++++ board/freescale/mx6sabresd/mx6dlsabresd.cfg | 2 +- board/freescale/mx6slevk/imximage.cfg | 2 +- board/freescale/mx6ullevk/imximage.cfg | 2 +- board/freescale/mx7dsabresd/imximage.cfg | 2 +- board/freescale/s32v234evb/s32v234evb.cfg | 2 +- board/freescale/vf610twr/imximage.cfg | 2 +- board/phytec/pcm052/imximage.cfg | 2 +- board/technexion/pico-imx6ul/imximage.cfg | 2 +- board/toradex/colibri_imx7/imximage.cfg | 2 +- board/toradex/colibri_vf/imximage.cfg | 2 +- board/warp/imximage.cfg | 2 +- board/warp7/imximage.cfg | 2 +- common/Kconfig | 5 + configs/imx6qdl_icore_defconfig | 32 + drivers/serial/Kconfig | 7 + drivers/thermal/Kconfig | 13 + include/configs/imx6qdl_icore.h | 131 +++ include/dt-bindings/clock/imx6qdl-clock.h | 274 ++++++ 37 files changed, 5195 insertions(+), 16 deletions(-) create mode 100644 arch/arm/dts/imx6dl-icore.dts create mode 100644 arch/arm/dts/imx6dl-pinfunc.h create mode 100644 arch/arm/dts/imx6dl.dtsi create mode 100644 arch/arm/dts/imx6q-icore.dts create mode 100644 arch/arm/dts/imx6q-pinfunc.h create mode 100644 arch/arm/dts/imx6q.dtsi create mode 100644 arch/arm/dts/imx6qdl-icore.dtsi create mode 100644 arch/arm/dts/imx6qdl.dtsi create mode 100644 board/engicam/icorem6/Kconfig create mode 100644 board/engicam/icorem6/MAINTAINERS create mode 100644 board/engicam/icorem6/Makefile create mode 100644 board/engicam/icorem6/README create mode 100644 board/engicam/icorem6/icorem6.c create mode 100644 configs/imx6qdl_icore_defconfig create mode 100644 include/configs/imx6qdl_icore.h create mode 100644 include/dt-bindings/clock/imx6qdl-clock.h