Configure Rock Pi 4 to boot from SPI NOR Flash.

Based on flash chip, board documentation and tests, this is the fastest I could use it.

This seems to be the minimum necessary configuration for Rock Pi 4 to be able to boot from SPI NOR Flash.

With the next patch, it works to sf probe 1:0, sf read, sf erase, sf write, sf read and then boot linux and flashrom can write to it. Sometimes flashrom seems to fail to write when at U-Boot stage there was no sf read or write, not sure why.

Changes from v1: - include CONFIG_SF_DEFAULT_BUS=1 now that numeration will be unified between U-Boot and SPL (at patch 5/5)

Signed-off-by: Xavier Drudis Ferran xdrudis@tinet.cat

Cc: Simon Glass sjg@chromium.org Cc: Philipp Tomsich philipp.tomsich@vrull.eu Cc: Kever Yang kever.yang@rock-chips.com --- arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi | 18 ++++++++++++++++++ configs/rock-pi-4-rk3399_defconfig | 22 ++++++++++++++++++++++ 2 files changed, 40 insertions(+)

diff --git a/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi b/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi index c17e769f64..4c2fe8f6bc 100644 --- a/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi +++ b/arch/arm/dts/rk3399-rock-pi-4-u-boot.dtsi @@ -15,3 +15,21 @@ &vdd_log { regulator-init-microvolt = <950000>; }; + +&spi1 { + status = "okay"; + spi-max-frequency = <40000000>; + spi-activate-delay = <12000>; /* 12 ms */ + + norflash: flash@0 { + compatible = "rockchip,spidev", "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <40000000>; + spi-cpha; + spi-cpol; + + status = "okay"; + u-boot,dm-pre-reloc; + }; +}; diff --git a/configs/rock-pi-4-rk3399_defconfig b/configs/rock-pi-4-rk3399_defconfig index eb5778dc17..93a8d3fd23 100644 --- a/configs/rock-pi-4-rk3399_defconfig +++ b/configs/rock-pi-4-rk3399_defconfig @@ -13,6 +13,8 @@ CONFIG_BOOTSTAGE_STASH_ADDR=0x3fbd0000 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_ENV_OFFSET_REDUND=0x3e0000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI=y CONFIG_SYS_LOAD_ADDR=0x800800 CONFIG_DEBUG_UART=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y @@ -36,6 +38,11 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_STACK=0x400000 CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPL_SPI_FLASH_MTD=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0xb0000 CONFIG_TPL=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y @@ -57,21 +64,36 @@ CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SF_DEFAULT_MODE=0x3 +CONFIG_SF_DEFAULT_SPEED=40000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_SOFT_RESET=y +CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y +CONFIG_SPI_FLASH_XTX=y +CONFIG_SPI_FLASH_MTD=y CONFIG_DM_ETH=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y CONFIG_NVME_PCI=y CONFIG_PCI=y +CONFIG_SPL_PHY=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_TYPEC=y +CONFIG_DM_PMIC_FAN53555=y CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y +CONFIG_SPL_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM_RK3399_LPDDR4=y CONFIG_DM_RESET=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_ROCKCHIP_SPI=y CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y