[U-Boot-Users] Fix interrupt sub mask on S3C2410, Fix clock calculation for S3C2410 cpu.
Martin
Your patches (slightly amended as per Wolfgangs comments) are available for test from
git://linux-arm.org/u-boot-armdev.git#S3C2410
Please confirm that the code runs on whatever S3C boards you have available.
Sorry for the delay, I hope to get this merged in the next window
Regards
Peter
Hi Peter,
u-boot-users-bounces@lists.sourceforge.net wrote on :
Martin
Your patches (slightly amended as per Wolfgangs comments) are available for test from
git://linux-arm.org/u-boot-armdev.git#S3C2410
Please confirm that the code runs on whatever S3C boards you have available.
I take a look at the patch you applied to your repository. It looks OK. It's a (little) pity, you integrated my three patches into one, because so the commit messages with the patch descriptions got lost.
Unfortunately I can't test the patches on real hardware. I do have a board with a S3C2410 CPU (a trab2 board), but the U-Boot for this board is freezed to version 1.1.6. And since I didn't post all patches for this board on the list (because they most propably wont't have gotten applied and I had no time to discuss and resend them), the current U-Boot wont't run on this board. I only posted the bugfix patches, because they may be helpful for others.
Under U-Boot 1.1.6 the patches do work very well since nearly a year now on the trab2 board. I see no reason why they shouldn't work under the current U-Boot (if they still aplly cleanly), but I can't test it.
Best Regards, Martin Krause
-- TQ-Systems GmbH Muehlstrasse 2, Gut Delling, D-82229 Seefeld Amtsgericht Muenchen, HRB 105 018, UST-IdNr. DE 811 607 913 Geschaeftsfuehrer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Ruediger Stahl http://www.tq-group.com
-----Original Message----- From: Martin Krause [mailto:Martin.Krause@tqs.de] Sent: 31 January 2008 12:12 To: Peter Pearse Cc: u-boot-users@lists.sourceforge.net Subject: RE: [U-Boot-Users] Fix interrupt sub mask on S3C2410,Fix clock calculation for S3C2410 cpu.
Hi Peter,
u-boot-users-bounces@lists.sourceforge.net wrote on :
Martin
Your patches (slightly amended as per Wolfgangs comments) are available for test from
git://linux-arm.org/u-boot-armdev.git#S3C2410
Please confirm that the code runs on whatever S3C boards you have available.
Unfortunately I can't test the patches on real hardware.
----snip
Under U-Boot 1.1.6 the patches do work very well since nearly a year now on the trab2 board. I see no reason why they shouldn't work under the current U-Boot (if they still aplly cleanly), but I can't test it.
OK, that's fine, just useful to have a test on real hardware.
Best Regards, Martin Krause
Thanks Martin
Regards
Peter
-----Original Message----- From: Martin Krause [mailto:Martin.Krause@tqs.de] Sent: 31 January 2008 12:12 To: Peter Pearse Cc: u-boot-users@lists.sourceforge.net Subject: RE: [U-Boot-Users] Fix interrupt sub mask on S3C2410,Fix clock calculation for S3C2410 cpu.
Hi Peter,
u-boot-users-bounces@lists.sourceforge.net wrote on :
Martin
Your patches (slightly amended as per Wolfgangs comments) are available for test from
git://linux-arm.org/u-boot-armdev.git#S3C2410
I take a look at the patch you applied to your repository. It looks OK. It's a (little) pity, you integrated my three patches into one, because so the commit messages with the patch descriptions got lost.
OK - now separately applied on branch git://linux-arm.org/u-boot-armdev.git#070322_s3c2410
Regards
Peter
participants (3)
-
Martin Krause -
Peter Pearse -
Peter Pearse