test/py GPIO failure in u-boot/master
Latest u-boot/master is failing a couple test/py test_ut tests for GPIO:
=> ut dm gpio Test: dm_test_gpio: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Test: dm_test_gpio: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Failures: 2
=> ut dm gpio_leak Test: dm_test_gpio_leak: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Test: dm_test_gpio_leak: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Failures: 4
This was introduced by one of the following changes; I'd assume due to the GPIO patch:
cmd: part: Add subcommand to list supported partition tables (detail) cmd: fs: Add command to list supported fs types (detail) cmd: dm: Fixed/Added DM driver listing subcommands (detail) cmd: blkls: Add blkls command (detail) image: Add support for ZSTD decompression (detail) Actions: OWL: Calculate SDRAM size (detail) arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs (detail) clk: actions: Add Ethernet clocks (detail) net: phy: realtek: Add support for RTL8201F PHY module. (detail) net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust (detail) net: designware: s700: Add glue code for S700 mac (detail) arm: dts: s700: add node for ethernet controller (detail) owl: Kconfig: Enable DM eth for OWL platform (detail) configs: Enable mac and phy configs (detail) gpio: search for gpio label if gpio is not found through bank name (detail) test_sleep.py: make sleep time and margin configurable (detail) fs: fat_write: fix short name creation. (detail) trace: clang compatible handling of gd register (detail) arm: remove outdated comment concerning -ffixed-x18 (detail) arm: use correct argument size of special registers (detail) arm: vexpress64: Fix counter frequency (detail) net: dm: Remove warning about EEPROM provided MAC address (detail) net: smc911x: Properly handle EEPROM MAC address (detail) arm: juno: Enable DM_ETH (detail) sata_sil: Enable DM_PCI operation (detail) arm: juno: Enable PCI (detail) arm: juno: Enable SATA controller (detail)
I see what was probably an attempt to fix this:
commit 7012865e961ca2645d783adf4b75ca4abdbfe5a7 (u-boot/master) Author: Heiko Schocher hs@denx.de Date: Wed Jul 8 10:24:00 2020 +0200
gpio: fix test.py for gpio label lookup
... but the tests are still failing after that. Did that patch edit the wrong defconfig, or is there an incremental build issue that prevented that patch being effective?
On Wed, Jul 08, 2020 at 09:50:06AM -0600, Stephen Warren wrote:
Latest u-boot/master is failing a couple test/py test_ut tests for GPIO:
=> ut dm gpio Test: dm_test_gpio: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Test: dm_test_gpio: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Failures: 2
=> ut dm gpio_leak Test: dm_test_gpio_leak: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Test: dm_test_gpio_leak: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Failures: 4
This was introduced by one of the following changes; I'd assume due to the GPIO patch:
cmd: part: Add subcommand to list supported partition tables (detail) cmd: fs: Add command to list supported fs types (detail) cmd: dm: Fixed/Added DM driver listing subcommands (detail) cmd: blkls: Add blkls command (detail) image: Add support for ZSTD decompression (detail) Actions: OWL: Calculate SDRAM size (detail) arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs (detail) clk: actions: Add Ethernet clocks (detail) net: phy: realtek: Add support for RTL8201F PHY module. (detail) net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust (detail) net: designware: s700: Add glue code for S700 mac (detail) arm: dts: s700: add node for ethernet controller (detail) owl: Kconfig: Enable DM eth for OWL platform (detail) configs: Enable mac and phy configs (detail) gpio: search for gpio label if gpio is not found through bank name (detail) test_sleep.py: make sleep time and margin configurable (detail) fs: fat_write: fix short name creation. (detail) trace: clang compatible handling of gd register (detail) arm: remove outdated comment concerning -ffixed-x18 (detail) arm: use correct argument size of special registers (detail) arm: vexpress64: Fix counter frequency (detail) net: dm: Remove warning about EEPROM provided MAC address (detail) net: smc911x: Properly handle EEPROM MAC address (detail) arm: juno: Enable DM_ETH (detail) sata_sil: Enable DM_PCI operation (detail) arm: juno: Enable PCI (detail) arm: juno: Enable SATA controller (detail)
I see what was probably an attempt to fix this:
commit 7012865e961ca2645d783adf4b75ca4abdbfe5a7 (u-boot/master) Author: Heiko Schocher hs@denx.de Date: Wed Jul 8 10:24:00 2020 +0200
gpio: fix test.py for gpio label lookup... but the tests are still failing after that. Did that patch edit the wrong defconfig, or is there an incremental build issue that prevented that patch being effective?
The tests are passing here and in GitLab again, so I'm not sure what's happening on your end.
On 7/8/20 10:06 AM, Tom Rini wrote:
On Wed, Jul 08, 2020 at 09:50:06AM -0600, Stephen Warren wrote:
Latest u-boot/master is failing a couple test/py test_ut tests for GPIO:
=> ut dm gpio Test: dm_test_gpio: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Test: dm_test_gpio: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Failures: 2
=> ut dm gpio_leak Test: dm_test_gpio_leak: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Test: dm_test_gpio_leak: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Failures: 4
This was introduced by one of the following changes; I'd assume due to the GPIO patch:
cmd: part: Add subcommand to list supported partition tables (detail) cmd: fs: Add command to list supported fs types (detail) cmd: dm: Fixed/Added DM driver listing subcommands (detail) cmd: blkls: Add blkls command (detail) image: Add support for ZSTD decompression (detail) Actions: OWL: Calculate SDRAM size (detail) arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs (detail) clk: actions: Add Ethernet clocks (detail) net: phy: realtek: Add support for RTL8201F PHY module. (detail) net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust (detail) net: designware: s700: Add glue code for S700 mac (detail) arm: dts: s700: add node for ethernet controller (detail) owl: Kconfig: Enable DM eth for OWL platform (detail) configs: Enable mac and phy configs (detail) gpio: search for gpio label if gpio is not found through bank name (detail) test_sleep.py: make sleep time and margin configurable (detail) fs: fat_write: fix short name creation. (detail) trace: clang compatible handling of gd register (detail) arm: remove outdated comment concerning -ffixed-x18 (detail) arm: use correct argument size of special registers (detail) arm: vexpress64: Fix counter frequency (detail) net: dm: Remove warning about EEPROM provided MAC address (detail) net: smc911x: Properly handle EEPROM MAC address (detail) arm: juno: Enable DM_ETH (detail) sata_sil: Enable DM_PCI operation (detail) arm: juno: Enable PCI (detail) arm: juno: Enable SATA controller (detail)
I see what was probably an attempt to fix this:
commit 7012865e961ca2645d783adf4b75ca4abdbfe5a7 (u-boot/master) Author: Heiko Schocher hs@denx.de Date: Wed Jul 8 10:24:00 2020 +0200
gpio: fix test.py for gpio label lookup... but the tests are still failing after that. Did that patch edit the wrong defconfig, or is there an incremental build issue that prevented that patch being effective?
The tests are passing here and in GitLab again, so I'm not sure what's happening on your end.
Hmm. There is some kind of incremental build issue. I repro'd on a different system with a different OS, so it's not isolated to the system that I use to run Jenkins:
# Ensure clean build git clean -fdx
# Check out the last commit before the fix git checkout 526fe06a5d1d96ce22cca743576945016ec4e2ef ./test/py/test.py --bd sandbox --build -k test_ut # Tests fail here due to the original GPIO issue
# Check out the fix for the GPIO issue git checkout 7012865e961ca2645d783adf4b75ca4abdbfe5a7 ./test/py/test.py --bd sandbox --build -k test_ut # Tests still fail!
# Ensure clean build rm -rf build-sandbox/ ./test/py/test.py --bd sandbox --build -k test_ut # Tests now pass due to clean build
Masahiro, do you have any ideas?
Hi,
On Wed, 8 Jul 2020 at 14:24, Stephen Warren swarren@wwwdotorg.org wrote:
On 7/8/20 10:06 AM, Tom Rini wrote:
On Wed, Jul 08, 2020 at 09:50:06AM -0600, Stephen Warren wrote:
Latest u-boot/master is failing a couple test/py test_ut tests for GPIO:
=> ut dm gpio Test: dm_test_gpio: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Test: dm_test_gpio: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Failures: 2
=> ut dm gpio_leak Test: dm_test_gpio_leak: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Test: dm_test_gpio_leak: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Failures: 4
This was introduced by one of the following changes; I'd assume due to the GPIO patch:
cmd: part: Add subcommand to list supported partition tables (detail) cmd: fs: Add command to list supported fs types (detail) cmd: dm: Fixed/Added DM driver listing subcommands (detail) cmd: blkls: Add blkls command (detail) image: Add support for ZSTD decompression (detail) Actions: OWL: Calculate SDRAM size (detail) arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs (detail) clk: actions: Add Ethernet clocks (detail) net: phy: realtek: Add support for RTL8201F PHY module. (detail) net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust (detail) net: designware: s700: Add glue code for S700 mac (detail) arm: dts: s700: add node for ethernet controller (detail) owl: Kconfig: Enable DM eth for OWL platform (detail) configs: Enable mac and phy configs (detail) gpio: search for gpio label if gpio is not found through bank name (detail) test_sleep.py: make sleep time and margin configurable (detail) fs: fat_write: fix short name creation. (detail) trace: clang compatible handling of gd register (detail) arm: remove outdated comment concerning -ffixed-x18 (detail) arm: use correct argument size of special registers (detail) arm: vexpress64: Fix counter frequency (detail) net: dm: Remove warning about EEPROM provided MAC address (detail) net: smc911x: Properly handle EEPROM MAC address (detail) arm: juno: Enable DM_ETH (detail) sata_sil: Enable DM_PCI operation (detail) arm: juno: Enable PCI (detail) arm: juno: Enable SATA controller (detail)
I see what was probably an attempt to fix this:
commit 7012865e961ca2645d783adf4b75ca4abdbfe5a7 (u-boot/master) Author: Heiko Schocher hs@denx.de Date: Wed Jul 8 10:24:00 2020 +0200
gpio: fix test.py for gpio label lookup... but the tests are still failing after that. Did that patch edit the wrong defconfig, or is there an incremental build issue that prevented that patch being effective?
The tests are passing here and in GitLab again, so I'm not sure what's happening on your end.
Hmm. There is some kind of incremental build issue. I repro'd on a different system with a different OS, so it's not isolated to the system that I use to run Jenkins:
# Ensure clean build git clean -fdx
# Check out the last commit before the fix git checkout 526fe06a5d1d96ce22cca743576945016ec4e2ef ./test/py/test.py --bd sandbox --build -k test_ut # Tests fail here due to the original GPIO issue
# Check out the fix for the GPIO issue git checkout 7012865e961ca2645d783adf4b75ca4abdbfe5a7 ./test/py/test.py --bd sandbox --build -k test_ut # Tests still fail!
# Ensure clean build rm -rf build-sandbox/ ./test/py/test.py --bd sandbox --build -k test_ut # Tests now pass due to clean build
Masahiro, do you have any ideas?
Sadly I have seen similar issues. For example if I disable a CONFIG and 'make' (even make xxx_defconfig; make) I now find that it doesn't build. I would expect changing a CONFIG to cause all C files to be rebuilt, unless we have a way to know what CONFIGs are used where?
I am not sure when this started happening, but not too long ago. I changed buildman to do incremental builds by default and ended up adding a -m option to clear things out.
Regards, Simon
On 7/8/20 2:24 PM, Stephen Warren wrote:
On 7/8/20 10:06 AM, Tom Rini wrote:
On Wed, Jul 08, 2020 at 09:50:06AM -0600, Stephen Warren wrote:
Latest u-boot/master is failing a couple test/py test_ut tests for GPIO:
=> ut dm gpio Test: dm_test_gpio: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Test: dm_test_gpio: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) Failures: 2
=> ut dm gpio_leak Test: dm_test_gpio_leak: gpio.c extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Test: dm_test_gpio_leak: gpio.c (flat tree) extra-gpios: get_value: error: gpio b5 not reserved /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:137, dm_test_gpio (): 0 == gpio_lookup_name ("hog_input_active_low", & dev, & offset, & gpio): Expected 0x0 (0), got 0xffffffea (-22) /var/lib/jenkins/workspace/u-boot-denx_uboot-master-build/src/u-boot/test/dm/gpio.c:302, dm_test_gpio_leak (): 0 == dm_test_gpio (ut): Expected 0x0 ( 0), got 0x1 (1) Failures: 4
This was introduced by one of the following changes; I'd assume due to the GPIO patch:
cmd: part: Add subcommand to list supported partition tables (detail) cmd: fs: Add command to list supported fs types (detail) cmd: dm: Fixed/Added DM driver listing subcommands (detail) cmd: blkls: Add blkls command (detail) image: Add support for ZSTD decompression (detail) Actions: OWL: Calculate SDRAM size (detail) arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs (detail) clk: actions: Add Ethernet clocks (detail) net: phy: realtek: Add support for RTL8201F PHY module. (detail) net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust (detail) net: designware: s700: Add glue code for S700 mac (detail) arm: dts: s700: add node for ethernet controller (detail) owl: Kconfig: Enable DM eth for OWL platform (detail) configs: Enable mac and phy configs (detail) gpio: search for gpio label if gpio is not found through bank name (detail) test_sleep.py: make sleep time and margin configurable (detail) fs: fat_write: fix short name creation. (detail) trace: clang compatible handling of gd register (detail) arm: remove outdated comment concerning -ffixed-x18 (detail) arm: use correct argument size of special registers (detail) arm: vexpress64: Fix counter frequency (detail) net: dm: Remove warning about EEPROM provided MAC address (detail) net: smc911x: Properly handle EEPROM MAC address (detail) arm: juno: Enable DM_ETH (detail) sata_sil: Enable DM_PCI operation (detail) arm: juno: Enable PCI (detail) arm: juno: Enable SATA controller (detail)
I see what was probably an attempt to fix this:
commit 7012865e961ca2645d783adf4b75ca4abdbfe5a7 (u-boot/master) Author: Heiko Schocher hs@denx.de Date: Wed Jul 8 10:24:00 2020 +0200
gpio: fix test.py for gpio label lookup... but the tests are still failing after that. Did that patch edit the wrong defconfig, or is there an incremental build issue that prevented that patch being effective?
The tests are passing here and in GitLab again, so I'm not sure what's happening on your end.
Hmm. There is some kind of incremental build issue. I repro'd on a different system with a different OS, so it's not isolated to the system that I use to run Jenkins:
# Ensure clean build git clean -fdx
# Check out the last commit before the fix git checkout 526fe06a5d1d96ce22cca743576945016ec4e2ef ./test/py/test.py --bd sandbox --build -k test_ut # Tests fail here due to the original GPIO issue
# Check out the fix for the GPIO issue git checkout 7012865e961ca2645d783adf4b75ca4abdbfe5a7 ./test/py/test.py --bd sandbox --build -k test_ut # Tests still fail!
# Ensure clean build rm -rf build-sandbox/ ./test/py/test.py --bd sandbox --build -k test_ut # Tests now pass due to clean build
Masahiro, do you have any ideas?
Ah, I found a bug in fixdep. Look for a patch titled "fixdep: fix CONFIG_IS_ENABLED etc. handling" in a few minutes.
participants (3)
-
Simon Glass -
Stephen Warren -
Tom Rini