Enable debug uart for Jaguar2 SoC family.

Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com --- board/mscc/jr2/jr2.c | 7 +++++++ configs/mscc_jr2_defconfig | 6 ++++++ 2 files changed, 13 insertions(+)

diff --git a/board/mscc/jr2/jr2.c b/board/mscc/jr2/jr2.c index eac4dca..226181f 100644 --- a/board/mscc/jr2/jr2.c +++ b/board/mscc/jr2/jr2.c @@ -64,6 +64,13 @@ static void vcoreiii_gpio_set_alternate(int gpio, int mode) } }

+void board_debug_uart_init(void) +{ + /* too early for the pinctrl driver, so configure the UART pins here */ + vcoreiii_gpio_set_alternate(10, 1); + vcoreiii_gpio_set_alternate(11, 1); +} + static void do_board_detect(void) { int i; diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig index 040e1e1..d80ca41 100644 --- a/configs/mscc_jr2_defconfig +++ b/configs/mscc_jr2_defconfig @@ -56,3 +56,9 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_LZMA=y +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_BASE=0x70100000 +CONFIG_DEBUG_UART_CLOCK=250000000 +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_DEBUG_UART_ANNOUNCE=y