u-boot reports a PCIE PLL lock error at boot time on Yucca board, and left PCIe nonfunctional. This is fixed by making u-boot function ppc4xx_init_pcie() to wait 300 uS after negating reset before the first check of the PLL lock.

Signed-off-by: Rupjyoti Sarmah rsarmah@amcc.com ---

diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c index 07fbb0e..78fdb4e 100644 --- a/cpu/ppc4xx/4xx_pcie.c +++ b/cpu/ppc4xx/4xx_pcie.c @@ -374,28 +374,35 @@ int ppc4xx_init_pcie(void) /* Set PLL clock receiver to LVPECL */ SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);

- if (check_error()) + if (check_error()) { + printf("ERROR: failed to set PCIe reference clock receiver --" + "PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1)); + return -1; + } + + /* Did resistance calibration work? */ + if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) { + printf("ERROR: PCIe resistance calibration failed --" + "PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));

- if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) - { - printf("PCIE: PESDR_PLLCT2 resistance calibration failed (0x%08x)\n", - SDR_READ(PESDR0_PLLLCT2)); return -1; } /* De-assert reset of PCIe PLL, wait for lock */ SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24)); - udelay(3); + udelay(300); /* 300 uS is maximum time lock should take */

while (time_out) { if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) { time_out--; - udelay(1); + udelay(20); /* Wait 20 uS more if needed */ } else break; } if (!time_out) { - printf("PCIE: VCO output not locked\n"); + printf("ERROR: PCIe PLL VCO output not locked to ref clock --" + "PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3)); + return -1; } return 0;