[U-Boot] [PATCHv2] sun7i: Add support for Olimex A20-OLinuXino-LIME2-eMMC
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for storage.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl --- Jagan,
I was fairly certain that I was updated, guess I was wrong! Sorry.
Changes since v1: rebase with master
Note: for the board to work properly, the updated eMMC dts variant needs to be resynced from upstream.
board/sunxi/MAINTAINERS | 5 +++++ configs/A20-OLinuXino-Lime2-eMMC_defconfig | 36 ++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+) create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index f39402b89c..24235a71a7 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -89,6 +89,11 @@ M: Iain Paton ipaton0@gmail.com S: Maintained F: configs/A20-OLinuXino-Lime2_defconfig
+A20-OLINUXINO-LIME2-EMMC BOARD +M: Olliver Schinagl oliver@schinagl.nl +S: Maintained +F: configs/A20-OLinuXino-Lime2-eMMC_defconfig + A33-OLINUXINO BOARD M: Stefan Mavrodiev stefan.mavrodiev@gmail.com S: Maintained diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig new file mode 100644 index 0000000000..034ae983a5 --- /dev/null +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -0,0 +1,36 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=384 +CONFIG_MMC0_CD_PIN="PH1" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_USB0_VBUS_PIN="PC17" +CONFIG_USB0_VBUS_DET="PH5" +CONFIG_I2C1_ENABLE=y +CONFIG_SATAPWR="PC3" +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SPL_I2C_SUPPORT=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_DFU=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_PARTITION_UUIDS is not set +CONFIG_DFU_RAM=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_RGMII=y +CONFIG_SUN7I_GMAC=y +CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Allwinner Technology" +CONFIG_G_DNL_VENDOR_NUM=0x1f3a +CONFIG_G_DNL_PRODUCT_NUM=0x1010
On Wed, May 3, 2017 at 8:10 PM, Olliver Schinagl oliver@schinagl.nl wrote:
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for storage.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl
Reviewed-by: Jagan Teki jagan@openedev.com
thanks!
On Wed, May 03, 2017 at 04:40:02PM +0200, Olliver Schinagl wrote:
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for storage.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl
Jagan,
I was fairly certain that I was updated, guess I was wrong! Sorry.
Changes since v1: rebase with master
Note: for the board to work properly, the updated eMMC dts variant needs to be resynced from upstream.
Please do so then.
Maxime
Hey Maxime,
On 04-05-17 10:43, Maxime Ripard wrote:
On Wed, May 03, 2017 at 04:40:02PM +0200, Olliver Schinagl wrote:
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for storage.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl
Jagan,
I was fairly certain that I was updated, guess I was wrong! Sorry.
Changes since v1: rebase with master
Note: for the board to work properly, the updated eMMC dts variant needs to be resynced from upstream.
Please do so then.
Sure, how do we normally do this? format-patch? cherry-pick from linux? I see it happening in the logs that periodically all dts files are synced, but don't know how we do this.
Olliver
Maxime
On Thu, May 4, 2017 at 4:44 PM, Olliver Schinagl oliver@schinagl.nl wrote:
Hey Maxime,
On 04-05-17 10:43, Maxime Ripard wrote:
On Wed, May 03, 2017 at 04:40:02PM +0200, Olliver Schinagl wrote:
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for storage.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl
Jagan,
I was fairly certain that I was updated, guess I was wrong! Sorry.
Changes since v1: rebase with master
Note: for the board to work properly, the updated eMMC dts variant needs to be resynced from upstream.
Please do so then.
Sure, how do we normally do this? format-patch? cherry-pick from linux? I see it happening in the logs that periodically all dts files are synced, but don't know how we do this.
Just copy the files (or symlinks) directly from the kernel, and make a patch.
ChenYu
Hey ChenYu
On 04-05-17 10:48, Chen-Yu Tsai wrote:
On Thu, May 4, 2017 at 4:44 PM, Olliver Schinagl oliver@schinagl.nl wrote:
Hey Maxime,
On 04-05-17 10:43, Maxime Ripard wrote:
On Wed, May 03, 2017 at 04:40:02PM +0200, Olliver Schinagl wrote:
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for storage.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl
Jagan,
I was fairly certain that I was updated, guess I was wrong! Sorry.
Changes since v1: rebase with master
Note: for the board to work properly, the updated eMMC dts variant needs to be resynced from upstream.
Please do so then.
Sure, how do we normally do this? format-patch? cherry-pick from linux? I see it happening in the logs that periodically all dts files are synced, but don't know how we do this.
Just copy the files (or symlinks) directly from the kernel, and make a patch.
Ah fair enough. Easy :)
Are they any plans to make this nicer/easier? E.g. have the dts files in a separate repo to be used by both?
ChenYu
On Thu, 4 May 2017 10:51:46 +0200 Olliver Schinagl oliver@schinagl.nl wrote:
Hey ChenYu
On 04-05-17 10:48, Chen-Yu Tsai wrote:
On Thu, May 4, 2017 at 4:44 PM, Olliver Schinagl oliver@schinagl.nl wrote:
Hey Maxime,
On 04-05-17 10:43, Maxime Ripard wrote:
On Wed, May 03, 2017 at 04:40:02PM +0200, Olliver Schinagl wrote:
This patch adds support for the Olimex OLinuXino Lime2 with eMMC flash storage. https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME2-eMMC/
It is a assembly variant of the regular Lime2 but featuring eMMC for storage.
Signed-off-by: Olliver Schinagl oliver@schinagl.nl
Jagan,
I was fairly certain that I was updated, guess I was wrong! Sorry.
Changes since v1: rebase with master
Note: for the board to work properly, the updated eMMC dts variant needs to be resynced from upstream.
Please do so then.
Sure, how do we normally do this? format-patch? cherry-pick from linux? I see it happening in the logs that periodically all dts files are synced, but don't know how we do this.
Just copy the files (or symlinks) directly from the kernel, and make a patch.
Ah fair enough. Easy :)
Are they any plans to make this nicer/easier? E.g. have the dts files in a separate repo to be used by both?
For the FreeBSD import we use this repo : https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasi...
I don't know if it would make sense to use that for u-boot.
ChenYu
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
participants (5)
-
Chen-Yu Tsai -
Emmanuel Vadot -
Jagan Teki -
Maxime Ripard -
Olliver Schinagl