[PATCH v2 0/3] arm: bcmbca: move bcm6753 support under CONFIG_ARCH_BCMBCA
Sorry for another version of patch series with some minor updates. Please see the change log and specific patch for details.
BCM6753 is essentially same as the main chip BCM6855 with different SKU number. It is part of the Broadcom BCA (Broadband Carrier Access origin) chipset family. BCM6753 was originally added by Philippe before Broadcom started to upstream the support for BCMBCA SoCs. The ARM based broadband SoC family is now supported under the unified ARCH_BCMBCA config. This patch series migrate the BCM6753 support under the config of ARCH_BCMBCA and BCM6855.
This patch series need to apply on top of my previous patch series [1]. This concludes the addition of BCA SoC support to u-boot at least for now.
[1]: https://lists.denx.de/pipermail/u-boot/2022-August/492474.html
Changes in v2: - Add help in BCM6855 Kconfig option to include the list of the supported chips. - Update subject line to be more clear for patch 3
William Zhang (3): arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753 arm: bcmbca: replace ARCH_BCM6753 symbols in Kconfig with BCM6855
MAINTAINERS | 1 + arch/arm/Kconfig | 8 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm6753.dtsi | 208 ------------------ arch/arm/dts/bcm6855.dtsi | 257 +++++++++++++++++++++++ arch/arm/dts/bcm96753ref.dts | 6 +- arch/arm/dts/bcm96855.dts | 30 +++ arch/arm/mach-bcmbca/Kconfig | 11 + arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6855/Kconfig | 17 ++ arch/arm/mach-bcmbca/bcm6855/Makefile | 5 + board/broadcom/bcm96753ref/Kconfig | 16 -- board/broadcom/bcm96753ref/MAINTAINERS | 6 - board/broadcom/bcm96753ref/Makefile | 3 - board/broadcom/bcm96753ref/bcm96753ref.c | 40 ---- board/broadcom/bcmbca/Kconfig | 7 + configs/bcm96753ref_ram_defconfig | 87 -------- configs/bcm96855_defconfig | 23 ++ drivers/gpio/Kconfig | 2 +- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- include/configs/bcm96855.h | 15 ++ include/configs/broadcom_bcm96753ref.h | 32 --- 24 files changed, 377 insertions(+), 410 deletions(-) delete mode 100644 arch/arm/dts/bcm6753.dtsi create mode 100644 arch/arm/dts/bcm6855.dtsi create mode 100644 arch/arm/dts/bcm96855.dts create mode 100644 arch/arm/mach-bcmbca/bcm6855/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm6855/Makefile delete mode 100644 board/broadcom/bcm96753ref/Kconfig delete mode 100644 board/broadcom/bcm96753ref/MAINTAINERS delete mode 100644 board/broadcom/bcm96753ref/Makefile delete mode 100644 board/broadcom/bcm96753ref/bcm96753ref.c delete mode 100644 configs/bcm96753ref_ram_defconfig create mode 100644 configs/bcm96855_defconfig create mode 100644 include/configs/bcm96855.h delete mode 100644 include/configs/broadcom_bcm96753ref.h
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
Signed-off-by: William Zhang william.zhang@broadcom.com
---
Changes in v2: - Add help in BCM6855 Kconfig option to include the list of the supported chips.
MAINTAINERS | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/bcm6855.dtsi | 120 ++++++++++++++++++++++++++ arch/arm/dts/bcm96855.dts | 30 +++++++ arch/arm/mach-bcmbca/Kconfig | 11 +++ arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6855/Kconfig | 17 ++++ arch/arm/mach-bcmbca/bcm6855/Makefile | 5 ++ board/broadcom/bcmbca/Kconfig | 7 ++ configs/bcm96855_defconfig | 23 +++++ include/configs/bcm96855.h | 11 +++ 11 files changed, 228 insertions(+) create mode 100644 arch/arm/dts/bcm6855.dtsi create mode 100644 arch/arm/dts/bcm96855.dts create mode 100644 arch/arm/mach-bcmbca/bcm6855/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm6855/Makefile create mode 100644 configs/bcm96855_defconfig create mode 100644 include/configs/bcm96855.h
diff --git a/MAINTAINERS b/MAINTAINERS index 819fa5b87824..371e84de1bc1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -230,6 +230,7 @@ N: bcm[9]?63178 N: bcm[9]?6756 N: bcm[9]?6813 N: bcm[9]?6846 +N: bcm[9]?6855 N: bcm[9]?6856 N: bcm[9]?6858 N: bcm[9]?6878 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 07e6130042f5..5fd38cc63b63 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1176,6 +1176,8 @@ dtb-$(CONFIG_BCM6813) += \ bcm96813.dtb dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb +dtb-$(CONFIG_BCM6855) += \ + bcm96855.dtb dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi new file mode 100644 index 000000000000..620f51aee1a2 --- /dev/null +++ b/arch/arm/dts/bcm6855.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6855", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/bcm96855.dts b/arch/arm/dts/bcm96855.dts new file mode 100644 index 000000000000..e4e740c73e97 --- /dev/null +++ b/arch/arm/dts/bcm96855.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6855.dtsi" + +/ { + model = "Broadcom BCM96855 Reference Board"; + compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig index 5b977734df41..27b243cbc3d8 100644 --- a/arch/arm/mach-bcmbca/Kconfig +++ b/arch/arm/mach-bcmbca/Kconfig @@ -83,6 +83,16 @@ config BCM6846 select DM_SERIAL select BCM6345_SERIAL
+config BCM6855 + bool "Support for Broadcom 6855 Family" + select SYS_ARCH_TIMER + select CPU_V7A + select DM_SERIAL + select PL01X_SERIAL + help + Broadcom BCM6855 is a triple core Cortex A7 based xPON Gateway + SoC. This SoC family includes BCM6855x, BCM68252 and BCM6753. + config BCM6856 bool "Support for Broadcom 6856 Family" select ARM64 @@ -121,6 +131,7 @@ source "arch/arm/mach-bcmbca/bcm63178/Kconfig" source "arch/arm/mach-bcmbca/bcm6756/Kconfig" source "arch/arm/mach-bcmbca/bcm6813/Kconfig" source "arch/arm/mach-bcmbca/bcm6846/Kconfig" +source "arch/arm/mach-bcmbca/bcm6855/Kconfig" source "arch/arm/mach-bcmbca/bcm6856/Kconfig" source "arch/arm/mach-bcmbca/bcm6858/Kconfig" source "arch/arm/mach-bcmbca/bcm6878/Kconfig" diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile index c06809417499..7de9450e1924 100644 --- a/arch/arm/mach-bcmbca/Makefile +++ b/arch/arm/mach-bcmbca/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_BCM63178) += bcm63178/ obj-$(CONFIG_BCM6756) += bcm6756/ obj-$(CONFIG_BCM6813) += bcm6813/ obj-$(CONFIG_BCM6846) += bcm6846/ +obj-$(CONFIG_BCM6855) += bcm6855/ obj-$(CONFIG_BCM6856) += bcm6856/ obj-$(CONFIG_BCM6858) += bcm6858/ obj-$(CONFIG_BCM6878) += bcm6878/ diff --git a/arch/arm/mach-bcmbca/bcm6855/Kconfig b/arch/arm/mach-bcmbca/bcm6855/Kconfig new file mode 100644 index 000000000000..78087c7dd59d --- /dev/null +++ b/arch/arm/mach-bcmbca/bcm6855/Kconfig @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM6855 + +config TARGET_BCM96855 + bool "Broadcom 6855 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm6855" + +source "board/broadcom/bcmbca/Kconfig" + +endif diff --git a/arch/arm/mach-bcmbca/bcm6855/Makefile b/arch/arm/mach-bcmbca/bcm6855/Makefile new file mode 100644 index 000000000000..beb979af7520 --- /dev/null +++ b/arch/arm/mach-bcmbca/bcm6855/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj- += dummy.o diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig index 7da9e954d4b2..5903a6a786fb 100644 --- a/board/broadcom/bcmbca/Kconfig +++ b/board/broadcom/bcmbca/Kconfig @@ -86,6 +86,13 @@ config SYS_CONFIG_NAME
endif
+if TARGET_BCM96855 + +config SYS_CONFIG_NAME + default "bcm96855" + +endif + if TARGET_BCM96856
config SYS_CONFIG_NAME diff --git a/configs/bcm96855_defconfig b/configs/bcm96855_defconfig new file mode 100644 index 000000000000..223c0a139b70 --- /dev/null +++ b/configs/bcm96855_defconfig @@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM6855=y +CONFIG_TARGET_BCM96855=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="bcm96855" +CONFIG_IDENT_STRING=" Broadcom BCM6855" +CONFIG_SYS_LOAD_ADDR=0x01000000 +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=y diff --git a/include/configs/bcm96855.h b/include/configs/bcm96855.h new file mode 100644 index 000000000000..6e420f2c66fb --- /dev/null +++ b/include/configs/bcm96855.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2022 Broadcom Ltd. + */ + +#ifndef __BCM96855_H +#define __BCM96855_H + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#endif
Hi William,
Le 22/08/2022 à 20:49, William Zhang a écrit :
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
Signed-off-by: William Zhang william.zhang@broadcom.com
Reviewed-by: Philippe Reynes philippe.reynes@softathome.com
Changes in v2:
- Add help in BCM6855 Kconfig option to include the list of the
supported chips.
MAINTAINERS | 1 + arch/arm/dts/Makefile | 2 + arch/arm/dts/bcm6855.dtsi | 120 ++++++++++++++++++++++++++ arch/arm/dts/bcm96855.dts | 30 +++++++ arch/arm/mach-bcmbca/Kconfig | 11 +++ arch/arm/mach-bcmbca/Makefile | 1 + arch/arm/mach-bcmbca/bcm6855/Kconfig | 17 ++++ arch/arm/mach-bcmbca/bcm6855/Makefile | 5 ++ board/broadcom/bcmbca/Kconfig | 7 ++ configs/bcm96855_defconfig | 23 +++++ include/configs/bcm96855.h | 11 +++ 11 files changed, 228 insertions(+) create mode 100644 arch/arm/dts/bcm6855.dtsi create mode 100644 arch/arm/dts/bcm96855.dts create mode 100644 arch/arm/mach-bcmbca/bcm6855/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm6855/Makefile create mode 100644 configs/bcm96855_defconfig create mode 100644 include/configs/bcm96855.h
diff --git a/MAINTAINERS b/MAINTAINERS index 819fa5b87824..371e84de1bc1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -230,6 +230,7 @@ N: bcm[9]?63178 N: bcm[9]?6756 N: bcm[9]?6813 N: bcm[9]?6846 +N: bcm[9]?6855 N: bcm[9]?6856 N: bcm[9]?6858 N: bcm[9]?6878 diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 07e6130042f5..5fd38cc63b63 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1176,6 +1176,8 @@ dtb-$(CONFIG_BCM6813) += \ bcm96813.dtb dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb +dtb-$(CONFIG_BCM6855) += \
- bcm96855.dtb dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb
diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi new file mode 100644 index 000000000000..620f51aee1a2 --- /dev/null +++ b/arch/arm/dts/bcm6855.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*
- Copyright 2022 Broadcom Ltd.
- */
+#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h>
+/ {
- compatible = "brcm,bcm6855", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&gic>;
- cpus {
#address-cells = <1>;#size-cells = <0>;CA7_0: cpu@0 {device_type = "cpu";compatible = "arm,cortex-a7";reg = <0x0>;next-level-cache = <&L2_0>;enable-method = "psci";};CA7_1: cpu@1 {device_type = "cpu";compatible = "arm,cortex-a7";reg = <0x1>;next-level-cache = <&L2_0>;enable-method = "psci";};CA7_2: cpu@2 {device_type = "cpu";compatible = "arm,cortex-a7";reg = <0x2>;next-level-cache = <&L2_0>;enable-method = "psci";};L2_0: l2-cache0 {compatible = "cache";};- };
- timer {
compatible = "arm,armv7-timer";interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;arm,cpu-registers-not-fw-configured;- };
- pmu: pmu {
compatible = "arm,cortex-a7-pmu";interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;- };
- clocks: clocks {
periph_clk: periph-clk {compatible = "fixed-clock";#clock-cells = <0>;clock-frequency = <200000000>;};uart_clk: uart-clk {compatible = "fixed-factor-clock";#clock-cells = <0>;clocks = <&periph_clk>;clock-div = <4>;clock-mult = <1>;};- };
- psci {
compatible = "arm,psci-0.2";method = "smc";- };
- axi@81000000 {
compatible = "simple-bus";#address-cells = <1>;#size-cells = <1>;ranges = <0 0x81000000 0x8000>;gic: interrupt-controller@1000 {compatible = "arm,cortex-a7-gic";#interrupt-cells = <3>;interrupt-controller;interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;reg = <0x1000 0x1000>,<0x2000 0x2000>,<0x4000 0x2000>,<0x6000 0x2000>;};- };
- bus@ff800000 {
compatible = "simple-bus";#address-cells = <1>;#size-cells = <1>;ranges = <0 0xff800000 0x800000>;uart0: serial@12000 {compatible = "arm,pl011", "arm,primecell";reg = <0x12000 0x1000>;interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;clocks = <&uart_clk>, <&uart_clk>;clock-names = "uartclk", "apb_pclk";status = "disabled";};- };
+}; diff --git a/arch/arm/dts/bcm96855.dts b/arch/arm/dts/bcm96855.dts new file mode 100644 index 000000000000..e4e740c73e97 --- /dev/null +++ b/arch/arm/dts/bcm96855.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/*
- Copyright 2022 Broadcom Ltd.
- */
+/dts-v1/;
+#include "bcm6855.dtsi"
+/ {
- model = "Broadcom BCM96855 Reference Board";
- compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
- aliases {
serial0 = &uart0;- };
- chosen {
stdout-path = "serial0:115200n8";- };
- memory@0 {
device_type = "memory";reg = <0x0 0x08000000>;- };
+};
+&uart0 {
- status = "okay";
+}; diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig index 5b977734df41..27b243cbc3d8 100644 --- a/arch/arm/mach-bcmbca/Kconfig +++ b/arch/arm/mach-bcmbca/Kconfig @@ -83,6 +83,16 @@ config BCM6846 select DM_SERIAL select BCM6345_SERIAL
+config BCM6855
- bool "Support for Broadcom 6855 Family"
- select SYS_ARCH_TIMER
- select CPU_V7A
- select DM_SERIAL
- select PL01X_SERIAL
- help
Broadcom BCM6855 is a triple core Cortex A7 based xPON GatewaySoC. This SoC family includes BCM6855x, BCM68252 and BCM6753.- config BCM6856 bool "Support for Broadcom 6856 Family" select ARM64
@@ -121,6 +131,7 @@ source "arch/arm/mach-bcmbca/bcm63178/Kconfig" source "arch/arm/mach-bcmbca/bcm6756/Kconfig" source "arch/arm/mach-bcmbca/bcm6813/Kconfig" source "arch/arm/mach-bcmbca/bcm6846/Kconfig" +source "arch/arm/mach-bcmbca/bcm6855/Kconfig" source "arch/arm/mach-bcmbca/bcm6856/Kconfig" source "arch/arm/mach-bcmbca/bcm6858/Kconfig" source "arch/arm/mach-bcmbca/bcm6878/Kconfig" diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile index c06809417499..7de9450e1924 100644 --- a/arch/arm/mach-bcmbca/Makefile +++ b/arch/arm/mach-bcmbca/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_BCM63178) += bcm63178/ obj-$(CONFIG_BCM6756) += bcm6756/ obj-$(CONFIG_BCM6813) += bcm6813/ obj-$(CONFIG_BCM6846) += bcm6846/ +obj-$(CONFIG_BCM6855) += bcm6855/ obj-$(CONFIG_BCM6856) += bcm6856/ obj-$(CONFIG_BCM6858) += bcm6858/ obj-$(CONFIG_BCM6878) += bcm6878/ diff --git a/arch/arm/mach-bcmbca/bcm6855/Kconfig b/arch/arm/mach-bcmbca/bcm6855/Kconfig new file mode 100644 index 000000000000..78087c7dd59d --- /dev/null +++ b/arch/arm/mach-bcmbca/bcm6855/Kconfig @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +#
+if BCM6855
+config TARGET_BCM96855
- bool "Broadcom 6855 Reference Board"
- depends on ARCH_BCMBCA
+config SYS_SOC
- default "bcm6855"
+source "board/broadcom/bcmbca/Kconfig"
+endif diff --git a/arch/arm/mach-bcmbca/bcm6855/Makefile b/arch/arm/mach-bcmbca/bcm6855/Makefile new file mode 100644 index 000000000000..beb979af7520 --- /dev/null +++ b/arch/arm/mach-bcmbca/bcm6855/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj- += dummy.o diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig index 7da9e954d4b2..5903a6a786fb 100644 --- a/board/broadcom/bcmbca/Kconfig +++ b/board/broadcom/bcmbca/Kconfig @@ -86,6 +86,13 @@ config SYS_CONFIG_NAME
endif
+if TARGET_BCM96855
+config SYS_CONFIG_NAME
- default "bcm96855"
+endif
if TARGET_BCM96856
config SYS_CONFIG_NAME
diff --git a/configs/bcm96855_defconfig b/configs/bcm96855_defconfig new file mode 100644 index 000000000000..223c0a139b70 --- /dev/null +++ b/configs/bcm96855_defconfig @@ -0,0 +1,23 @@ +CONFIG_ARM=y +CONFIG_COUNTER_FREQUENCY=50000000 +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM6855=y +CONFIG_TARGET_BCM96855=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="bcm96855" +CONFIG_IDENT_STRING=" Broadcom BCM6855" +CONFIG_SYS_LOAD_ADDR=0x01000000 +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=y diff --git a/include/configs/bcm96855.h b/include/configs/bcm96855.h new file mode 100644 index 000000000000..6e420f2c66fb --- /dev/null +++ b/include/configs/bcm96855.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/*
- (C) Copyright 2022 Broadcom Ltd.
- */
+#ifndef __BCM96855_H +#define __BCM96855_H
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#endif
On Mon, Aug 22, 2022 at 11:49:06AM -0700, William Zhang wrote:
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the BCA (Broadband Carrier Access origin) chipset family. Like other broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the linux-next git repository so the dts and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there to the console.
Signed-off-by: William Zhang william.zhang@broadcom.com Reviewed-by: Philippe Reynes philippe.reynes@softathome.com
For the series, applied to u-boot/master, thanks!
BCM6753 is essentially same as the main chip BCM6855 but with different SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its configuration and dts settings. This includes: - Remove the bcm96753ref board folder. It is replaced by the generic bcmbca board folder. - Merge the 6753.dtsi setting to the new 6855.dtsi file. Update 96753ref board dts with the new compatible string. - Delete broadcom_bcm96763ref.h and merge its setting to the new bcm96855.h file. - Delete bcm96753ref_ram_defconfig and use a basic config version of bcm96855_defconfig
Signed-off-by: William Zhang william.zhang@broadcom.com ---
(no changes since v1)
arch/arm/Kconfig | 8 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm6753.dtsi | 208 ----------------------- arch/arm/dts/bcm6855.dtsi | 137 +++++++++++++++ arch/arm/dts/bcm96753ref.dts | 6 +- board/broadcom/bcm96753ref/Kconfig | 16 -- board/broadcom/bcm96753ref/MAINTAINERS | 6 - board/broadcom/bcm96753ref/Makefile | 3 - board/broadcom/bcm96753ref/bcm96753ref.c | 40 ----- configs/bcm96753ref_ram_defconfig | 87 ---------- include/configs/bcm96855.h | 4 + include/configs/broadcom_bcm96753ref.h | 32 ---- 12 files changed, 146 insertions(+), 407 deletions(-) delete mode 100644 arch/arm/dts/bcm6753.dtsi delete mode 100644 board/broadcom/bcm96753ref/Kconfig delete mode 100644 board/broadcom/bcm96753ref/MAINTAINERS delete mode 100644 board/broadcom/bcm96753ref/Makefile delete mode 100644 board/broadcom/bcm96753ref/bcm96753ref.c delete mode 100644 configs/bcm96753ref_ram_defconfig delete mode 100644 include/configs/broadcom_bcm96753ref.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 063616ff8d0b..c1f195e9d106 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -665,13 +665,6 @@ config ARCH_BCM283X imply CMD_DM imply FAT_WRITE
-config ARCH_BCM6753 - bool "Broadcom BCM6753 family" - select CPU_V7A - select DM - select OF_CONTROL - imply CMD_DM - config ARCH_BCMSTB bool "Broadcom BCM7XXX family" select CPU_V7A @@ -2267,7 +2260,6 @@ source "board/Marvell/octeontx2/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" -source "board/broadcom/bcm96753ref/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/eets/pdu001/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5fd38cc63b63..8fba735cc8ab 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1147,9 +1147,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-4-b.dtb
-dtb-$(CONFIG_ARCH_BCM6753) += \ - bcm96753ref.dtb - dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb @@ -1177,7 +1174,8 @@ dtb-$(CONFIG_BCM6813) += \ dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb dtb-$(CONFIG_BCM6855) += \ - bcm96855.dtb + bcm96855.dtb \ + bcm96753ref.dtb dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb diff --git a/arch/arm/dts/bcm6753.dtsi b/arch/arm/dts/bcm6753.dtsi deleted file mode 100644 index e88ab095c290..000000000000 --- a/arch/arm/dts/bcm6753.dtsi +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com - */ - -#include "skeleton.dtsi" - -/ { - compatible = "brcm,bcm6753"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - u-boot,dm-pre-reloc; - - cpu0: cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0x1>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0x2>; - next-level-cache = <&l2>; - u-boot,dm-pre-reloc; - }; - - l2: l2-cache0 { - compatible = "cache"; - u-boot,dm-pre-reloc; - }; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - u-boot,dm-pre-reloc; - - periph_osc: periph-osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - u-boot,dm-pre-reloc; - }; - - hsspi_pll: hsspi-pll { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&periph_osc>; - clock-mult = <2>; - clock-div = <1>; - }; - - refclk50mhz: refclk50mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; - }; - - ubus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - u-boot,dm-pre-reloc; - - uart0: serial@ff812000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xff812000 0x1000>; - clock = <50000000>; - - status = "disabled"; - }; - - wdt1: watchdog@ff800480 { - compatible = "brcm,bcm6345-wdt"; - reg = <0xff800480 0x14>; - clocks = <&refclk50mhz>; - }; - - wdt2: watchdog@ff8004c0 { - compatible = "brcm,bcm6345-wdt"; - reg = <0xff8004c0 0x14>; - clocks = <&refclk50mhz>; - }; - - wdt-reboot { - compatible = "wdt-reboot"; - wdt = <&wdt1>; - }; - - gpio0: gpio-controller@0xff800500 { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff800500 0x4>, - <0xff800520 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio1: gpio-controller@0xff800504 { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff800504 0x4>, - <0xff800524 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio2: gpio-controller@0xff800508 { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff800508 0x4>, - <0xff800528 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio3: gpio-controller@0xff80050c { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff80050c 0x4>, - <0xff80052c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio4: gpio-controller@0xff800510 { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff800510 0x4>, - <0xff800530 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio5: gpio-controller@0xff800514 { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff800514 0x4>, - <0xff800534 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio6: gpio-controller@0xff800518 { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff800518 0x4>, - <0xff800538 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - gpio7: gpio-controller@0xff80051c { - compatible = "brcm,bcm6345-gpio"; - reg = <0xff80051c 0x4>, - <0xff80053c 0x4>; - gpio-controller; - #gpio-cells = <2>; - - status = "disabled"; - }; - - nand: nand-controller@ff801800 { - compatible = "brcm,nand-bcm6753", - "brcm,brcmnand-v5.0", - "brcm,brcmnand"; - reg-names = "nand", "nand-int-base", "nand-cache"; - reg = <0xff801800 0x180>, - <0xff802000 0x10>, - <0xff801c00 0x200>; - parameter-page-big-endian = <0>; - - status = "disabled"; - }; - - leds: led-controller@ff803000 { - compatible = "brcm,bcm6753-leds"; - reg = <0xff803000 0x3480>; - - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi index 620f51aee1a2..05e0a4e0da7c 100644 --- a/arch/arm/dts/bcm6855.dtsi +++ b/arch/arm/dts/bcm6855.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* + * Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com * Copyright 2022 Broadcom Ltd. */
@@ -64,6 +65,8 @@ };
clocks: clocks { + u-boot,dm-pre-reloc; + periph_clk: periph-clk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -77,6 +80,22 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-mult = <2>; + clock-div = <1>; + }; + + wdt_clk: wdt-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; };
psci { @@ -107,6 +126,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + u-boot,dm-pre-reloc;
uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; @@ -116,5 +136,122 @@ clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; + + wdt1: watchdog@480 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x480 0x14>; + clocks = <&wdt_clk>; + }; + + wdt2: watchdog@4c0 { + compatible = "brcm,bcm6345-wdt"; + reg = <0x4c0 0x14>; + clocks = <&wdt_clk>; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdt1>; + }; + + gpio0: gpio-controller@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x4>, + <0x520 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio1: gpio-controller@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x4>, + <0x524 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio2: gpio-controller@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x4>, + <0x528 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio3: gpio-controller@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x4>, + <0x52c 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio4: gpio-controller@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x4>, + <0x530 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio5: gpio-controller@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x4>, + <0x534 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio6: gpio-controller@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x4>, + <0x538 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio7: gpio-controller@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x4>, + <0x53c 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + nand: nand-controller@1800 { + compatible = "brcm,nand-bcm6753", + "brcm,brcmnand-v5.0", + "brcm,brcmnand"; + reg-names = "nand", "nand-int-base", "nand-cache"; + reg = <0x1800 0x180>, + <0x2000 0x10>, + <0x1c00 0x200>; + parameter-page-big-endian = <0>; + + status = "disabled"; + }; + + leds: led-controller@3000 { + compatible = "brcm,bcm6753-leds"; + reg = <0x3000 0x3480>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/dts/bcm96753ref.dts b/arch/arm/dts/bcm96753ref.dts index ca15ca5f108d..f74137f18f46 100644 --- a/arch/arm/dts/bcm96753ref.dts +++ b/arch/arm/dts/bcm96753ref.dts @@ -5,13 +5,13 @@
/dts-v1/;
-#include "bcm6753.dtsi" +#include "bcm6855.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ { - model = "Broadcom bcm6753ref"; - compatible = "broadcom,bcm6753ref", "brcm,bcm6753"; + model = "Broadcom BCM96753REF Reference Board"; + compatible = "brcm,bcm96753ref", "brcm,bcm6855", "brcm,bcmbca";
aliases { serial0 = &uart0; diff --git a/board/broadcom/bcm96753ref/Kconfig b/board/broadcom/bcm96753ref/Kconfig deleted file mode 100644 index 479e7905787b..000000000000 --- a/board/broadcom/bcm96753ref/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if TARGET_BCM96753REF - -config SYS_VENDOR - default "broadcom" - -config SYS_BOARD - default "bcm96753ref" - -config SYS_CONFIG_NAME - default "broadcom_bcm96753ref" - -endif - -config TARGET_BCM96753REF - bool "Support Broadcom bcm96753ref" - depends on ARCH_BCM6753 diff --git a/board/broadcom/bcm96753ref/MAINTAINERS b/board/broadcom/bcm96753ref/MAINTAINERS deleted file mode 100644 index be060f5a709c..000000000000 --- a/board/broadcom/bcm96753ref/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BROADCOM BCM96753REF -M: Philippe Reynes philippe.reynes@softathome.com -S: Maintained -F: board/broadcom/bcm96753ref -F: include/configs/broadcom_bcm96753ref.h -F: configs/bcm96753ref_ram_defconfig diff --git a/board/broadcom/bcm96753ref/Makefile b/board/broadcom/bcm96753ref/Makefile deleted file mode 100644 index a1fa2bff8670..000000000000 --- a/board/broadcom/bcm96753ref/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += bcm96753ref.o diff --git a/board/broadcom/bcm96753ref/bcm96753ref.c b/board/broadcom/bcm96753ref/bcm96753ref.c deleted file mode 100644 index bf78d843aa57..000000000000 --- a/board/broadcom/bcm96753ref/bcm96753ref.c +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com - */ - -#include <common.h> -#include <fdtdec.h> -#include <linux/io.h> -#include <cpu_func.h> - -int board_init(void) -{ - return 0; -} - -int dram_init(void) -{ - if (fdtdec_setup_mem_size_base() != 0) - printf("fdtdec_setup_mem_size_base() has failed\n"); - - return 0; -} - -int dram_init_banksize(void) -{ - fdtdec_setup_memory_banksize(); - - return 0; -} - -int print_cpuinfo(void) -{ - return 0; -} - -void enable_caches(void) -{ - icache_enable(); - dcache_enable(); -} diff --git a/configs/bcm96753ref_ram_defconfig b/configs/bcm96753ref_ram_defconfig deleted file mode 100644 index 59ac1cdf7e1e..000000000000 --- a/configs/bcm96753ref_ram_defconfig +++ /dev/null @@ -1,87 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y -CONFIG_SYS_ARCH_TIMER=y -CONFIG_ARCH_BCM6753=y -CONFIG_SYS_TEXT_BASE=0x1000000 -CONFIG_SYS_MALLOC_F_LEN=0x1000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x20000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="bcm96753ref" -CONFIG_ARMV7_LPAE=y -CONFIG_SYS_LOAD_ADDR=0x1000000 -CONFIG_TARGET_BCM96753REF=y -CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 -CONFIG_FIT=y -CONFIG_FIT_SIGNATURE=y -CONFIG_FIT_CIPHER=y -CONFIG_FIT_VERBOSE=y -CONFIG_LEGACY_IMAGE_FORMAT=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -# CONFIG_AUTOBOOT is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=24 -CONFIG_SYS_CBSIZE=256 -CONFIG_SYS_PBSIZE=276 -# CONFIG_CMD_BOOTD is not set -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_IMPORTENV is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_SAVEENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_CRC32 is not set -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_CLK=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_MTD=y -CONFIG_CMD_NAND=y -CONFIG_CMD_SPI=y -CONFIG_CMD_WDT=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -# CONFIG_NET is not set -CONFIG_REGMAP=y -CONFIG_SYSCON=y -CONFIG_BUTTON=y -CONFIG_BUTTON_GPIO=y -CONFIG_CLK=y -CONFIG_BCM6345_GPIO=y -# CONFIG_INPUT is not set -CONFIG_LED=y -CONFIG_LED_BCM6753=y -CONFIG_LED_BLINK=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_DM_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_BRCMNAND=y -CONFIG_NAND_BRCMNAND_6753=y -CONFIG_PINCTRL=y -CONFIG_PINCONF=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_PL01X_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_SPI_MEM=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_WATCHDOG=y -CONFIG_WDT_BCM6345=y -CONFIG_REGEX=y diff --git a/include/configs/bcm96855.h b/include/configs/bcm96855.h index 6e420f2c66fb..ba2d8a317d25 100644 --- a/include/configs/bcm96855.h +++ b/include/configs/bcm96855.h @@ -8,4 +8,8 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */ + #endif diff --git a/include/configs/broadcom_bcm96753ref.h b/include/configs/broadcom_bcm96753ref.h deleted file mode 100644 index 33c70c73c1fc..000000000000 --- a/include/configs/broadcom_bcm96753ref.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com - */ - -#include <linux/sizes.h> - -/* - * common - */ - -/* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ - 230400, 500000, 1500000 } -/* Memory usage */ - -/* - * 6853 - */ - -/* RAM */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* U-Boot */ - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - -/* - * 96753ref - */
Hi William,
Le 22/08/2022 à 20:49, William Zhang a écrit :
BCM6753 is essentially same as the main chip BCM6855 but with different SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its configuration and dts settings. This includes:
- Remove the bcm96753ref board folder. It is replaced by the
generic bcmbca board folder.
- Merge the 6753.dtsi setting to the new 6855.dtsi file. Update
96753ref board dts with the new compatible string.
- Delete broadcom_bcm96763ref.h and merge its setting to the new
bcm96855.h file.
- Delete bcm96753ref_ram_defconfig and use a basic config version of
bcm96855_defconfig
Signed-off-by: William Zhang william.zhang@broadcom.com
Reviewed-by: Philippe Reynes philippe.reynes@softathome.com
(no changes since v1)
arch/arm/Kconfig | 8 - arch/arm/dts/Makefile | 6 +- arch/arm/dts/bcm6753.dtsi | 208 ----------------------- arch/arm/dts/bcm6855.dtsi | 137 +++++++++++++++ arch/arm/dts/bcm96753ref.dts | 6 +- board/broadcom/bcm96753ref/Kconfig | 16 -- board/broadcom/bcm96753ref/MAINTAINERS | 6 - board/broadcom/bcm96753ref/Makefile | 3 - board/broadcom/bcm96753ref/bcm96753ref.c | 40 ----- configs/bcm96753ref_ram_defconfig | 87 ---------- include/configs/bcm96855.h | 4 + include/configs/broadcom_bcm96753ref.h | 32 ---- 12 files changed, 146 insertions(+), 407 deletions(-) delete mode 100644 arch/arm/dts/bcm6753.dtsi delete mode 100644 board/broadcom/bcm96753ref/Kconfig delete mode 100644 board/broadcom/bcm96753ref/MAINTAINERS delete mode 100644 board/broadcom/bcm96753ref/Makefile delete mode 100644 board/broadcom/bcm96753ref/bcm96753ref.c delete mode 100644 configs/bcm96753ref_ram_defconfig delete mode 100644 include/configs/broadcom_bcm96753ref.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 063616ff8d0b..c1f195e9d106 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -665,13 +665,6 @@ config ARCH_BCM283X imply CMD_DM imply FAT_WRITE
-config ARCH_BCM6753
- bool "Broadcom BCM6753 family"
- select CPU_V7A
- select DM
- select OF_CONTROL
- imply CMD_DM
- config ARCH_BCMSTB bool "Broadcom BCM7XXX family" select CPU_V7A
@@ -2267,7 +2260,6 @@ source "board/Marvell/octeontx2/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/cortina/presidio-asic/Kconfig" -source "board/broadcom/bcm96753ref/Kconfig" source "board/broadcom/bcmns3/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/eets/pdu001/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5fd38cc63b63..8fba735cc8ab 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1147,9 +1147,6 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ bcm2837-rpi-cm3-io3.dtb \ bcm2711-rpi-4-b.dtb
-dtb-$(CONFIG_ARCH_BCM6753) += \
bcm96753ref.dtb
dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb
dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
@@ -1177,7 +1174,8 @@ dtb-$(CONFIG_BCM6813) += \ dtb-$(CONFIG_BCM6846) += \ bcm96846.dtb dtb-$(CONFIG_BCM6855) += \
- bcm96855.dtb
- bcm96855.dtb \
- bcm96753ref.dtb dtb-$(CONFIG_BCM6856) += \ bcm96856.dtb \ bcm968360bg.dtb
diff --git a/arch/arm/dts/bcm6753.dtsi b/arch/arm/dts/bcm6753.dtsi deleted file mode 100644 index e88ab095c290..000000000000 --- a/arch/arm/dts/bcm6753.dtsi +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/*
- Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com
- */
-#include "skeleton.dtsi"
-/ {
- compatible = "brcm,bcm6753";
- #address-cells = <1>;
- #size-cells = <1>;
- cpus {
#address-cells = <1>;#size-cells = <0>;u-boot,dm-pre-reloc;cpu0: cpu@0 {compatible = "arm,cortex-a7";device_type = "cpu";reg = <0x0>;next-level-cache = <&l2>;u-boot,dm-pre-reloc;};cpu1: cpu@1 {compatible = "arm,cortex-a7";device_type = "cpu";reg = <0x1>;next-level-cache = <&l2>;u-boot,dm-pre-reloc;};cpu2: cpu@2 {compatible = "arm,cortex-a7";device_type = "cpu";reg = <0x2>;next-level-cache = <&l2>;u-boot,dm-pre-reloc;};l2: l2-cache0 {compatible = "cache";u-boot,dm-pre-reloc;};- };
- clocks {
compatible = "simple-bus";#address-cells = <1>;#size-cells = <1>;ranges;u-boot,dm-pre-reloc;periph_osc: periph-osc {compatible = "fixed-clock";#clock-cells = <0>;clock-frequency = <200000000>;u-boot,dm-pre-reloc;};hsspi_pll: hsspi-pll {compatible = "fixed-factor-clock";#clock-cells = <0>;clocks = <&periph_osc>;clock-mult = <2>;clock-div = <1>;};refclk50mhz: refclk50mhz {compatible = "fixed-clock";#clock-cells = <0>;clock-frequency = <50000000>;};- };
- ubus {
compatible = "simple-bus";#address-cells = <1>;#size-cells = <1>;u-boot,dm-pre-reloc;uart0: serial@ff812000 {compatible = "arm,pl011", "arm,primecell";reg = <0xff812000 0x1000>;clock = <50000000>;status = "disabled";};wdt1: watchdog@ff800480 {compatible = "brcm,bcm6345-wdt";reg = <0xff800480 0x14>;clocks = <&refclk50mhz>;};wdt2: watchdog@ff8004c0 {compatible = "brcm,bcm6345-wdt";reg = <0xff8004c0 0x14>;clocks = <&refclk50mhz>;};wdt-reboot {compatible = "wdt-reboot";wdt = <&wdt1>;};gpio0: gpio-controller@0xff800500 {compatible = "brcm,bcm6345-gpio";reg = <0xff800500 0x4>,<0xff800520 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio1: gpio-controller@0xff800504 {compatible = "brcm,bcm6345-gpio";reg = <0xff800504 0x4>,<0xff800524 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio2: gpio-controller@0xff800508 {compatible = "brcm,bcm6345-gpio";reg = <0xff800508 0x4>,<0xff800528 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio3: gpio-controller@0xff80050c {compatible = "brcm,bcm6345-gpio";reg = <0xff80050c 0x4>,<0xff80052c 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio4: gpio-controller@0xff800510 {compatible = "brcm,bcm6345-gpio";reg = <0xff800510 0x4>,<0xff800530 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio5: gpio-controller@0xff800514 {compatible = "brcm,bcm6345-gpio";reg = <0xff800514 0x4>,<0xff800534 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio6: gpio-controller@0xff800518 {compatible = "brcm,bcm6345-gpio";reg = <0xff800518 0x4>,<0xff800538 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio7: gpio-controller@0xff80051c {compatible = "brcm,bcm6345-gpio";reg = <0xff80051c 0x4>,<0xff80053c 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};nand: nand-controller@ff801800 {compatible = "brcm,nand-bcm6753","brcm,brcmnand-v5.0","brcm,brcmnand";reg-names = "nand", "nand-int-base", "nand-cache";reg = <0xff801800 0x180>,<0xff802000 0x10>,<0xff801c00 0x200>;parameter-page-big-endian = <0>;status = "disabled";};leds: led-controller@ff803000 {compatible = "brcm,bcm6753-leds";reg = <0xff803000 0x3480>;status = "disabled";};- };
-}; diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi index 620f51aee1a2..05e0a4e0da7c 100644 --- a/arch/arm/dts/bcm6855.dtsi +++ b/arch/arm/dts/bcm6855.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /*
*/
- Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com
- Copyright 2022 Broadcom Ltd.
@@ -64,6 +65,8 @@ };
clocks: clocks {
u-boot,dm-pre-reloc;- periph_clk: periph-clk { compatible = "fixed-clock"; #clock-cells = <0>;
@@ -77,6 +80,22 @@ clock-div = <4>; clock-mult = <1>; };
hsspi_pll: hsspi-pll {compatible = "fixed-factor-clock";#clock-cells = <0>;clocks = <&periph_clk>;clock-mult = <2>;clock-div = <1>;};wdt_clk: wdt-clk {compatible = "fixed-factor-clock";#clock-cells = <0>;clocks = <&periph_clk>;clock-div = <4>;clock-mult = <1>;};};
psci {
@@ -107,6 +126,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0xff800000 0x800000>;
u-boot,dm-pre-reloc;uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell";
@@ -116,5 +136,122 @@ clock-names = "uartclk", "apb_pclk"; status = "disabled"; };
wdt1: watchdog@480 {compatible = "brcm,bcm6345-wdt";reg = <0x480 0x14>;clocks = <&wdt_clk>;};wdt2: watchdog@4c0 {compatible = "brcm,bcm6345-wdt";reg = <0x4c0 0x14>;clocks = <&wdt_clk>;};wdt-reboot {compatible = "wdt-reboot";wdt = <&wdt1>;};gpio0: gpio-controller@500 {compatible = "brcm,bcm6345-gpio";reg = <0x500 0x4>,<0x520 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio1: gpio-controller@504 {compatible = "brcm,bcm6345-gpio";reg = <0x504 0x4>,<0x524 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio2: gpio-controller@508 {compatible = "brcm,bcm6345-gpio";reg = <0x508 0x4>,<0x528 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio3: gpio-controller@50c {compatible = "brcm,bcm6345-gpio";reg = <0x50c 0x4>,<0x52c 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio4: gpio-controller@510 {compatible = "brcm,bcm6345-gpio";reg = <0x510 0x4>,<0x530 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio5: gpio-controller@514 {compatible = "brcm,bcm6345-gpio";reg = <0x514 0x4>,<0x534 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio6: gpio-controller@518 {compatible = "brcm,bcm6345-gpio";reg = <0x518 0x4>,<0x538 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};gpio7: gpio-controller@51c {compatible = "brcm,bcm6345-gpio";reg = <0x51c 0x4>,<0x53c 0x4>;gpio-controller;#gpio-cells = <2>;status = "disabled";};nand: nand-controller@1800 {compatible = "brcm,nand-bcm6753","brcm,brcmnand-v5.0","brcm,brcmnand";reg-names = "nand", "nand-int-base", "nand-cache";reg = <0x1800 0x180>,<0x2000 0x10>,<0x1c00 0x200>;parameter-page-big-endian = <0>;status = "disabled";};leds: led-controller@3000 {compatible = "brcm,bcm6753-leds";reg = <0x3000 0x3480>;status = "disabled";};diff --git a/arch/arm/dts/bcm96753ref.dts b/arch/arm/dts/bcm96753ref.dts index ca15ca5f108d..f74137f18f46 100644 --- a/arch/arm/dts/bcm96753ref.dts +++ b/arch/arm/dts/bcm96753ref.dts @@ -5,13 +5,13 @@
/dts-v1/;
-#include "bcm6753.dtsi" +#include "bcm6855.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Broadcom bcm6753ref";
- compatible = "broadcom,bcm6753ref", "brcm,bcm6753";
model = "Broadcom BCM96753REF Reference Board";
compatible = "brcm,bcm96753ref", "brcm,bcm6855", "brcm,bcmbca";
aliases { serial0 = &uart0;
diff --git a/board/broadcom/bcm96753ref/Kconfig b/board/broadcom/bcm96753ref/Kconfig deleted file mode 100644 index 479e7905787b..000000000000 --- a/board/broadcom/bcm96753ref/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -if TARGET_BCM96753REF
-config SYS_VENDOR
- default "broadcom"
-config SYS_BOARD
- default "bcm96753ref"
-config SYS_CONFIG_NAME
- default "broadcom_bcm96753ref"
-endif
-config TARGET_BCM96753REF
- bool "Support Broadcom bcm96753ref"
- depends on ARCH_BCM6753
diff --git a/board/broadcom/bcm96753ref/MAINTAINERS b/board/broadcom/bcm96753ref/MAINTAINERS deleted file mode 100644 index be060f5a709c..000000000000 --- a/board/broadcom/bcm96753ref/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -BROADCOM BCM96753REF -M: Philippe Reynes philippe.reynes@softathome.com -S: Maintained -F: board/broadcom/bcm96753ref -F: include/configs/broadcom_bcm96753ref.h -F: configs/bcm96753ref_ram_defconfig diff --git a/board/broadcom/bcm96753ref/Makefile b/board/broadcom/bcm96753ref/Makefile deleted file mode 100644 index a1fa2bff8670..000000000000 --- a/board/broadcom/bcm96753ref/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+
-obj-y += bcm96753ref.o diff --git a/board/broadcom/bcm96753ref/bcm96753ref.c b/board/broadcom/bcm96753ref/bcm96753ref.c deleted file mode 100644 index bf78d843aa57..000000000000 --- a/board/broadcom/bcm96753ref/bcm96753ref.c +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/*
- Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com
- */
-#include <common.h> -#include <fdtdec.h> -#include <linux/io.h> -#include <cpu_func.h>
-int board_init(void) -{
- return 0;
-}
-int dram_init(void) -{
- if (fdtdec_setup_mem_size_base() != 0)
printf("fdtdec_setup_mem_size_base() has failed\n");- return 0;
-}
-int dram_init_banksize(void) -{
- fdtdec_setup_memory_banksize();
- return 0;
-}
-int print_cpuinfo(void) -{
- return 0;
-}
-void enable_caches(void) -{
- icache_enable();
- dcache_enable();
-} diff --git a/configs/bcm96753ref_ram_defconfig b/configs/bcm96753ref_ram_defconfig deleted file mode 100644 index 59ac1cdf7e1e..000000000000 --- a/configs/bcm96753ref_ram_defconfig +++ /dev/null @@ -1,87 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y -CONFIG_SYS_ARCH_TIMER=y -CONFIG_ARCH_BCM6753=y -CONFIG_SYS_TEXT_BASE=0x1000000 -CONFIG_SYS_MALLOC_F_LEN=0x1000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x20000 -CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="bcm96753ref" -CONFIG_ARMV7_LPAE=y -CONFIG_SYS_LOAD_ADDR=0x1000000 -CONFIG_TARGET_BCM96753REF=y -CONFIG_ENV_VARS_UBOOT_CONFIG=y -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000 -CONFIG_FIT=y -CONFIG_FIT_SIGNATURE=y -CONFIG_FIT_CIPHER=y -CONFIG_FIT_VERBOSE=y -CONFIG_LEGACY_IMAGE_FORMAT=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -# CONFIG_AUTOBOOT is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_MAXARGS=24 -CONFIG_SYS_CBSIZE=256 -CONFIG_SYS_PBSIZE=276 -# CONFIG_CMD_BOOTD is not set -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_BOOTM_PLAN9 is not set -# CONFIG_BOOTM_RTEMS is not set -# CONFIG_BOOTM_VXWORKS is not set -# CONFIG_CMD_ELF is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_IMPORTENV is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_SAVEENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_CRC32 is not set -CONFIG_CMD_MEMINFO=y -CONFIG_CMD_CLK=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_MTD=y -CONFIG_CMD_NAND=y -CONFIG_CMD_SPI=y -CONFIG_CMD_WDT=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_MTDPARTS=y -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -# CONFIG_NET is not set -CONFIG_REGMAP=y -CONFIG_SYSCON=y -CONFIG_BUTTON=y -CONFIG_BUTTON_GPIO=y -CONFIG_CLK=y -CONFIG_BCM6345_GPIO=y -# CONFIG_INPUT is not set -CONFIG_LED=y -CONFIG_LED_BCM6753=y -CONFIG_LED_BLINK=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_DM_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_BRCMNAND=y -CONFIG_NAND_BRCMNAND_6753=y -CONFIG_PINCTRL=y -CONFIG_PINCONF=y -CONFIG_SPECIFY_CONSOLE_INDEX=y -CONFIG_DM_SERIAL=y -CONFIG_PL01X_SERIAL=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_SPI_MEM=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_WATCHDOG=y -CONFIG_WDT_BCM6345=y -CONFIG_REGEX=y diff --git a/include/configs/bcm96855.h b/include/configs/bcm96855.h index 6e420f2c66fb..ba2d8a317d25 100644 --- a/include/configs/bcm96855.h +++ b/include/configs/bcm96855.h @@ -8,4 +8,8 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#ifdef CONFIG_MTD_RAW_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* CONFIG_MTD_RAW_NAND */
- #endif
diff --git a/include/configs/broadcom_bcm96753ref.h b/include/configs/broadcom_bcm96753ref.h deleted file mode 100644 index 33c70c73c1fc..000000000000 --- a/include/configs/broadcom_bcm96753ref.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/*
- Copyright (C) 2022 Philippe Reynes philippe.reynes@softathome.com
- */
-#include <linux/sizes.h>
-/*
- common
- */
-/* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \
230400, 500000, 1500000 }-/* Memory usage */
-/*
- 6853
- */
-/* RAM */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000
-/* U-Boot */
-#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */
-/*
- 96753ref
- */
As CONFIG_ARCH_BCM6753 is replaced with CONFIG_BCM6855, update the driver Kconfig to use the new config symbol.
Signed-off-by: William Zhang william.zhang@broadcom.com
---
Changes in v2: - Update subject line to be more clear for patch 3
drivers/gpio/Kconfig | 2 +- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 929f3fb9eacb..d8020de969ef 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -111,7 +111,7 @@ config BCM2835_GPIO config BCM6345_GPIO bool "BCM6345 GPIO driver" depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \ - BCM6858 || BCM63158 || ARCH_BCM6753) + BCM6858 || BCM63158 || BCM6855) help This driver supports the GPIO banks on BCM6345 SoCs.
diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index 98f015a07f97..996b757e6d00 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -30,7 +30,7 @@ config LED_BCM6358
config LED_BCM6753 bool "LED Support for BCM6753" - depends on LED && ARCH_BCM6753 + depends on LED && BCM6855 help This option enables support for LEDs connected to the BCM6753 HW has blinking and fading capabilities and up to 32 LEDs can be controlled. diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index f8445e09633c..d6e3eeb3c093 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -97,7 +97,7 @@ config NAND_BRCMNAND_6368
config NAND_BRCMNAND_6753 bool "Support Broadcom NAND controller on bcm6753" - depends on NAND_BRCMNAND && ARCH_BCM6753 + depends on NAND_BRCMNAND && BCM6855 help Enable support for broadcom nand driver on bcm6753.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 84a4034fe87c..65f2d0821c60 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -129,7 +129,7 @@ config WDT_AT91 config WDT_BCM6345 bool "BCM6345 watchdog timer support" depends on WDT && (ARCH_BMIPS || BCM6856 || \ - BCM6858 || BCM63158 || ARCH_BCM6753) + BCM6858 || BCM63158 || BCM6855) help Select this to enable watchdog timer for BCM6345 SoCs. The watchdog timer is stopped when initialized.
Hi William,
Le 22/08/2022 à 20:49, William Zhang a écrit :
As CONFIG_ARCH_BCM6753 is replaced with CONFIG_BCM6855, update the driver Kconfig to use the new config symbol.
Signed-off-by: William Zhang william.zhang@broadcom.com
Reviewed-by: Philippe Reynes philippe.reynes@softathome.com
Changes in v2:
Update subject line to be more clear for patch 3
drivers/gpio/Kconfig | 2 +- drivers/led/Kconfig | 2 +- drivers/mtd/nand/raw/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 929f3fb9eacb..d8020de969ef 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -111,7 +111,7 @@ config BCM2835_GPIO config BCM6345_GPIO bool "BCM6345 GPIO driver" depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \
BCM6858 || BCM63158 || ARCH_BCM6753)
BCM6858 || BCM63158 || BCM6855)diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index 98f015a07f97..996b757e6d00 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -30,7 +30,7 @@ config LED_BCM6358
config LED_BCM6753 bool "LED Support for BCM6753"
- depends on LED && ARCH_BCM6753
- depends on LED && BCM6855 help This option enables support for LEDs connected to the BCM6753 HW has blinking and fading capabilities and up to 32 LEDs can be controlled.
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index f8445e09633c..d6e3eeb3c093 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -97,7 +97,7 @@ config NAND_BRCMNAND_6368
config NAND_BRCMNAND_6753 bool "Support Broadcom NAND controller on bcm6753"
- depends on NAND_BRCMNAND && ARCH_BCM6753
- depends on NAND_BRCMNAND && BCM6855 help Enable support for broadcom nand driver on bcm6753.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 84a4034fe87c..65f2d0821c60 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -129,7 +129,7 @@ config WDT_AT91 config WDT_BCM6345 bool "BCM6345 watchdog timer support" depends on WDT && (ARCH_BMIPS || BCM6856 || \
BCM6858 || BCM63158 || ARCH_BCM6753)
BCM6858 || BCM63158 || BCM6855)
participants (3)
-
Philippe REYNES -
Tom Rini -
William Zhang