Hi Tom/Joe,

Is this going to be applied to u-boot/next or u-boot-net?

Best Regards, Thiru

On 8/17/2020 5:08 PM, Thirupathaiah Annapureddy wrote:

ftgmac100 driver is using hard-coded PHY interface address of zero. Each board can have different PHY interface address (phy_addr). This commit modifies the driver to make use of board specific address by leveraging CONFIG_PHY_ADDR.

Signed-off-by: Thirupathaiah Annapureddy thiruan@linux.microsoft.com

drivers/net/ftgmac100.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c index 5676a5b3ba..00bda24f1f 100644 --- a/drivers/net/ftgmac100.c +++ b/drivers/net/ftgmac100.c @@ -551,6 +551,10 @@ static int ftgmac100_probe(struct udevice *dev) priv->max_speed = pdata->max_speed; priv->phy_addr = 0;

+#ifdef CONFIG_PHY_ADDR

• priv->phy_addr = CONFIG_PHY_ADDR;

+#endif

• ret = clk_enable_bulk(&priv->clks); if (ret) goto out;