Hi Stefano,

On Thu, 04 Apr 2013 10:31:56 +0200, Stefano Babic sbabic@denx.de wrote:

Hi Albert,

last iMX fixes for the release. Please pull from u-boot-imx, thanks.

The following changes since commit b27673ccbd3d5435319b5c09c3e7061f559f925d:

Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master' (2013-03-15 20:50:43 +0100)

are available in the git repository at:

git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to d36b39bf0d1dbe4ef03f7fc1f20b2e52eb90acf5:

spi: mxc_spi: Fix ECSPI reset handling (2013-04-04 10:23:09 +0200)

---

Abbas Raza (1): mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board

Alexandre Pereira da Silva (1): mx23_olinuxino: Fix netboot console

Benoît Thébaudeau (1): mx25pdk: Enable imxdi RTC

Dirk Behme (1): spi: mxc_spi: Fix ECSPI reset handling

Eric Nelson (2): i.MX6: Add hdmidet command to detect attached HDMI monitor i.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TIMEOUT

Fabio Estevam (10): mxs: spl_mem_init: Align DDR2 init with FSL bootlets source configs: mx28evk: Use single-line comments mx28evk: Disable CONFIG_CMD_I2C Add initial support for Wandboard dual lite and solo. mx28evk: Introduce a new target for saving env vars to NAND mx6qsabrelite: README: No need to pass 'u-boot.imx' mx6: Fix get_board_rev() for the mx6 solo case wandboard: Remove duplicate 'mmc dev' mx6qsabrelite: Remove duplicate 'mmc dev' wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM

Javier Martinez Canillas (1): i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command

Knut Wohlrab (1): imx-common: timer: fix 32-bit overflow

Otavio Salvador (4): mx6qsabresd: Document the mapping of USDHC[2-4] mx6qsabresd: Fix card detection for invalid card id case mx6qsabre{sd,auto}: Add boot mode select mx23_olinuxino: Change definitions to use spaces instead of tabs

MAINTAINERS | 1 + arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 +-- arch/arm/cpu/armv7/mx6/soc.c | 12 ++ arch/arm/imx-common/Makefile | 1 + arch/arm/imx-common/cmd_hdmidet.c | 37 +++++ arch/arm/imx-common/timer.c | 26 +-- arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 3 + board/boundary/nitrogen6x/nitrogen6x.c | 8 +- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 18 +++ board/freescale/mx6qsabrelite/README | 4 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 8 +- board/freescale/mx6qsabresd/mx6qsabresd.c | 48 ++++-- board/wandboard/Makefile | 29 ++++ board/wandboard/README | 40 +++++ board/wandboard/wandboard.c | 178 +++++++++++++++++++++ boards.cfg | 5 +- doc/README.mx28evk | 18 +++ drivers/mmc/fsl_esdhc.c | 7 + drivers/spi/mxc_spi.c | 8 +- include/configs/mx23_olinuxino.h | 162 +++++++++---------- include/configs/mx25pdk.h | 4 + include/configs/mx28evk.h | 92 ++++++----- include/configs/mx6qsabre_common.h | 2 + include/configs/mx6qsabrelite.h | 3 - include/configs/wandboard.h | 209 +++++++++++++++++++++++++ include/fsl_esdhc.h | 1 + 26 files changed, 757 insertions(+), 185 deletions(-) create mode 100644 arch/arm/imx-common/cmd_hdmidet.c create mode 100644 board/wandboard/Makefile create mode 100644 board/wandboard/README create mode 100644 board/wandboard/wandboard.c create mode 100644 include/configs/wandboard.h

Applied to u-boot-arm/master, thanks!

Amicalement,