[U-Boot] [PATCH 0/4] ARM: DRA7xx: Enable FIT
This series enables FIT for DRA7xx platforms. Depends on the FIT support series posted recently.
Testing: Defconfig used: dra7xx_evm_defconfig (DT boot with FIT enabled) DRA74-Evm RevH: SD boot: http://pastebin.ubuntu.com/16258169/ eMMC boot: http://pastebin.ubuntu.com/16258272/ QSPI_4 boot: http://pastebin.ubuntu.com/16258216/ DRA72-Evm RevC: SD boot: http://pastebin.ubuntu.com/16257943/ eMMC boot: http://pastebin.ubuntu.com/16258075/ QSPI_4 boot: http://pastebin.ubuntu.com/16258135/
Lokesh Vutla (4): ARM: DRA7: configs: Rename dra7xx_evm to dra7xx_evm_nodt defconfig board: dra7: fit: add support for selecting dtb dynamically ARM: DRA7: Enable FIT ARM: DRA7: configs: Remove obsolete configs
board/ti/dra7xx/MAINTAINERS | 5 +--- board/ti/dra7xx/evm.c | 12 ++++++++ configs/dra72_evm_defconfig | 53 ----------------------------------- configs/dra74_evm_defconfig | 52 ---------------------------------- configs/dra7xx_evm_defconfig | 15 +++++++++- configs/dra7xx_evm_nodt_defconfig | 43 ++++++++++++++++++++++++++++ configs/dra7xx_evm_qspiboot_defconfig | 43 ---------------------------- configs/dra7xx_evm_uart3_defconfig | 44 ----------------------------- 8 files changed, 70 insertions(+), 197 deletions(-) delete mode 100644 configs/dra72_evm_defconfig delete mode 100644 configs/dra74_evm_defconfig create mode 100644 configs/dra7xx_evm_nodt_defconfig delete mode 100644 configs/dra7xx_evm_qspiboot_defconfig delete mode 100644 configs/dra7xx_evm_uart3_defconfig
This is to make dra7xx_evm_defconfig to use DT and FIT support by default.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- board/ti/dra7xx/MAINTAINERS | 2 +- configs/dra7xx_evm_defconfig | 43 --------------------------------------- configs/dra7xx_evm_nodt_defconfig | 43 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 44 insertions(+), 44 deletions(-) delete mode 100644 configs/dra7xx_evm_defconfig create mode 100644 configs/dra7xx_evm_nodt_defconfig
diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS index 3f638d0..f158487 100644 --- a/board/ti/dra7xx/MAINTAINERS +++ b/board/ti/dra7xx/MAINTAINERS @@ -5,6 +5,6 @@ F: board/ti/dra7xx/ F: include/configs/dra7xx_evm.h F: configs/dra72_evm_defconfig F: configs/dra74_evm_defconfig -F: configs/dra7xx_evm_defconfig +F: configs/dra7xx_evm_nodt_defconfig F: configs/dra7xx_evm_qspiboot_defconfig F: configs/dra7xx_evm_uart3_defconfig diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig deleted file mode 100644 index b6458ae..0000000 --- a/configs/dra7xx_evm_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_DRA7XX_EVM=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL=y -CONFIG_SPL_STACK_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_USB=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0451 -CONFIG_G_DNL_PRODUCT_NUM=0xd022 -CONFIG_OF_LIBFDT=y diff --git a/configs/dra7xx_evm_nodt_defconfig b/configs/dra7xx_evm_nodt_defconfig new file mode 100644 index 0000000..b6458ae --- /dev/null +++ b/configs/dra7xx_evm_nodt_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_OMAP54XX=y +CONFIG_TARGET_DRA7XX_EVM=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SYS_NS16550=y +CONFIG_TI_QSPI=y +CONFIG_USB=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_OMAP=y +CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Texas Instruments" +CONFIG_G_DNL_VENDOR_NUM=0x0451 +CONFIG_G_DNL_PRODUCT_NUM=0xd022 +CONFIG_OF_LIBFDT=y
On Fri, May 06, 2016 at 06:37:00PM +0530, Lokesh Vutla wrote:
This is to make dra7xx_evm_defconfig to use DT and FIT support by default.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com
Lets just drop the non-DT way of doing things here.
Hi Tom,
On Friday 06 May 2016 11:19 PM, Tom Rini wrote:
On Fri, May 06, 2016 at 06:37:00PM +0530, Lokesh Vutla wrote:
This is to make dra7xx_evm_defconfig to use DT and FIT support by default.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com
Lets just drop the non-DT way of doing things here.
Peripheral boot like ethernet, uart and XIP boot does support FIT loading yet. So, I wanted to keep a non-dt defconfig so that these modes can be verified. Once these are done, we can delete this.
Thanks and regards, Lokesh
FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- board/ti/dra7xx/evm.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 9bd71d8..5122c3a 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -718,3 +718,15 @@ int board_early_init_f(void) return 0; } #endif + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + if (is_dra72x() && !strcmp(name, "dra72-evm")) + return 0; + else if (!is_dra72x() && !strcmp(name, "dra7-evm")) + return 0; + else + return -1; +} +#endif
On Fri, May 06, 2016 at 06:37:01PM +0530, Lokesh Vutla wrote:
FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
Use a single defconfig for all DRA7 platforms by enabling FIT and delete the platform specific defconfigs.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- board/ti/dra7xx/MAINTAINERS | 3 +-- configs/dra72_evm_defconfig | 53 ----------------------------------------- configs/dra74_evm_defconfig | 52 ---------------------------------------- configs/dra7xx_evm_defconfig | 56 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 57 insertions(+), 107 deletions(-) delete mode 100644 configs/dra72_evm_defconfig delete mode 100644 configs/dra74_evm_defconfig create mode 100644 configs/dra7xx_evm_defconfig
diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS index f158487..d6efe26 100644 --- a/board/ti/dra7xx/MAINTAINERS +++ b/board/ti/dra7xx/MAINTAINERS @@ -3,8 +3,7 @@ M: Lokesh Vutla lokeshvutla@ti.com S: Maintained F: board/ti/dra7xx/ F: include/configs/dra7xx_evm.h -F: configs/dra72_evm_defconfig -F: configs/dra74_evm_defconfig +F: configs/dra7xx_evm_defconfig F: configs/dra7xx_evm_nodt_defconfig F: configs/dra7xx_evm_qspiboot_defconfig F: configs/dra7xx_evm_uart3_defconfig diff --git a/configs/dra72_evm_defconfig b/configs/dra72_evm_defconfig deleted file mode 100644 index 00c6ac3..0000000 --- a/configs/dra72_evm_defconfig +++ /dev/null @@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP54XX=y -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_TARGET_DRA7XX_EVM=y -CONFIG_DM_SERIAL=y -CONFIG_DM_SPI=y -CONFIG_DM_SPI_FLASH=y -CONFIG_DM_GPIO=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_DEFAULT_DEVICE_TREE="dra72-evm" -CONFIG_SPL=y -CONFIG_SPL_STACK_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_OF_CONTROL=y -CONFIG_DM=y -CONFIG_DM_MMC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_TIMER=y -CONFIG_OMAP_TIMER=y -CONFIG_USB=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0451 -CONFIG_G_DNL_PRODUCT_NUM=0xd022 diff --git a/configs/dra74_evm_defconfig b/configs/dra74_evm_defconfig deleted file mode 100644 index a11dcd5..0000000 --- a/configs/dra74_evm_defconfig +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_DRA7XX_EVM=y -CONFIG_DM_SERIAL=y -CONFIG_DM_SPI=y -CONFIG_DM_SPI_FLASH=y -CONFIG_DM_GPIO=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_DEFAULT_DEVICE_TREE="dra7-evm" -CONFIG_SPL=y -CONFIG_SPL_STACK_R=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_OF_CONTROL=y -CONFIG_DM=y -CONFIG_DM_MMC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_TIMER=y -CONFIG_OMAP_TIMER=y -CONFIG_USB=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0451 -CONFIG_G_DNL_PRODUCT_NUM=0xd022 diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig new file mode 100644 index 0000000..c856eb7 --- /dev/null +++ b/configs/dra7xx_evm_defconfig @@ -0,0 +1,56 @@ +CONFIG_ARM=y +CONFIG_OMAP54XX=y +CONFIG_TARGET_DRA7XX_EVM=y +CONFIG_DM_SERIAL=y +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_GPIO=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_DEFAULT_DEVICE_TREE="dra7-evm" +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_DFU=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_MMC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SYS_NS16550=y +CONFIG_TI_QSPI=y +CONFIG_TIMER=y +CONFIG_OMAP_TIMER=y +CONFIG_USB=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_OMAP=y +CONFIG_USB_DWC3_PHY_OMAP=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Texas Instruments" +CONFIG_G_DNL_VENDOR_NUM=0x0451 +CONFIG_G_DNL_PRODUCT_NUM=0xd022 +CONFIG_FIT=y +CONFIG_SPL_OF_LIBFDT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_OF_LIST="dra7-evm dra72-evm"
On Fri, May 06, 2016 at 06:37:02PM +0530, Lokesh Vutla wrote:
Use a single defconfig for all DRA7 platforms by enabling FIT and delete the platform specific defconfigs.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
Removing: uart3_defconfig: Now uart3 can be selected using menuconfig, removing separate config for uart mode. Doing uart boot is not straight forward as ROM uses uart3 as default serial console. In order to boot to prompt, concole in both u-boot and kernel needs to be changed.
qspiboot_defconfig: The only advantage of enabling QSPI_BOOT is selecting env in QSPI. Eventually env needs to be selected by menuconfig so removing qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- board/ti/dra7xx/MAINTAINERS | 2 -- configs/dra7xx_evm_qspiboot_defconfig | 43 ---------------------------------- configs/dra7xx_evm_uart3_defconfig | 44 ----------------------------------- 3 files changed, 89 deletions(-) delete mode 100644 configs/dra7xx_evm_qspiboot_defconfig delete mode 100644 configs/dra7xx_evm_uart3_defconfig
diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS index d6efe26..edfbdb7 100644 --- a/board/ti/dra7xx/MAINTAINERS +++ b/board/ti/dra7xx/MAINTAINERS @@ -5,5 +5,3 @@ F: board/ti/dra7xx/ F: include/configs/dra7xx_evm.h F: configs/dra7xx_evm_defconfig F: configs/dra7xx_evm_nodt_defconfig -F: configs/dra7xx_evm_qspiboot_defconfig -F: configs/dra7xx_evm_uart3_defconfig diff --git a/configs/dra7xx_evm_qspiboot_defconfig b/configs/dra7xx_evm_qspiboot_defconfig deleted file mode 100644 index 8ebfe49..0000000 --- a/configs/dra7xx_evm_qspiboot_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_DRA7XX_EVM=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL=y -CONFIG_SPL_STACK_R=y -CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_USB=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0451 -CONFIG_G_DNL_PRODUCT_NUM=0xd022 -CONFIG_OF_LIBFDT=y diff --git a/configs/dra7xx_evm_uart3_defconfig b/configs/dra7xx_evm_uart3_defconfig deleted file mode 100644 index 54c7ba9..0000000 --- a/configs/dra7xx_evm_uart3_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_DRA7XX_EVM=y -CONFIG_CONS_INDEX=3 -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL=y -CONFIG_SPL_STACK_R=y -CONFIG_SYS_EXTRA_OPTIONS="SPL_YMODEM_SUPPORT" -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_IMLS is not set -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_I2C=y -CONFIG_CMD_USB=y -CONFIG_CMD_DFU=y -CONFIG_CMD_GPIO=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SYS_NS16550=y -CONFIG_TI_QSPI=y -CONFIG_USB=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_G_DNL_MANUFACTURER="Texas Instruments" -CONFIG_G_DNL_VENDOR_NUM=0x0451 -CONFIG_G_DNL_PRODUCT_NUM=0xd022 -CONFIG_OF_LIBFDT=y
On Fri, May 06, 2016 at 06:37:03PM +0530, Lokesh Vutla wrote:
Removing: uart3_defconfig: Now uart3 can be selected using menuconfig, removing separate config for uart mode. Doing uart boot is not straight forward as ROM uses uart3 as default serial console. In order to boot to prompt, concole in both u-boot and kernel needs to be changed.
qspiboot_defconfig: The only advantage of enabling QSPI_BOOT is selecting env in QSPI. Eventually env needs to be selected by menuconfig so removing qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com
Reviewed-by: Tom Rini trini@konsulko.com
participants (2)
-
Lokesh Vutla -
Tom Rini