Hi,

On 12.12.2023 17:03, Neil Armstrong wrote:

Hi,

On 30/11/2023 13:27, Arseniy Krasnov wrote:

Can you add a reference to the Linux patches that you submitted so we know it will be safe to sync the DT from Linux when they are merged ?

Sure:

https://lore.kernel.org/linux-amlogic/20230828133647.3712644-1-avkrasnov@sal... https://lore.kernel.org/linux-amlogic/170107314359.1083800.42642289705695023...

Thanks, Arseniy

Thanks, Neil

...

Signed-off-by: Arseniy Krasnov avkrasnov@salutedevices.com

arch/arm/dts/meson-axg.dtsi | 35 +++++++++++++++++++++++++++++++++++   1 file changed, 35 insertions(+)

diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi index 3f5254eeb4..c01ace3ff1 100644 --- a/arch/arm/dts/meson-axg.dtsi +++ b/arch/arm/dts/meson-axg.dtsi @@ -430,6 +430,27 @@                       };                   };   +                nand_all_pins: nand_all_pins { +                    mux { +                        groups = "emmc_nand_d0", +                             "emmc_nand_d1", +                             "emmc_nand_d2", +                             "emmc_nand_d3", +                             "emmc_nand_d4", +                             "emmc_nand_d5", +                             "emmc_nand_d6", +                             "emmc_nand_d7", +                             "nand_ce0", +                             "nand_ale", +                             "nand_cle", +                             "nand_wen_clk", +                             "nand_ren_wr"; +                        function = "nand"; +                        input-enable; +                        bias-pull-up; +                    }; +                };

emmc_ds_pins: emmc_ds {                       mux {                           groups = "emmc_ds"; @@ -1906,6 +1927,20 @@                   resets = <&reset RESET_SD_EMMC_C>;               };   +            nfc: nand-controller@7800 { +                #address-cells = <2>; +                #size-cells = <2>; +                pinctrl-0 = <&nand_all_pins>; +                pinctrl-names = "default"; +                compatible = "amlogic,meson-axg-nfc"; +                status = "okay"; +                reg = <0x0 0x7800 0x0 0x100>, +                      <0x0 0x7000 0x0 0x800>; +                clocks = <&clkc CLKID_SD_EMMC_C>, +                     <&clkc CLKID_FCLK_DIV2>; +                clock-names = "core", "device"; +            };

usb2_phy1: phy@9020 {                   compatible = "amlogic,meson-gxl-usb2-phy";                   #phy-cells = <0>;