[U-Boot] [PATCH] apalis_imx6: add board_fit_config_name_match to support FIT in SPL
Only one dtb is currently supported, so match with imx6-apalis.
Signed-off-by: Ricardo Salveti ricardo@foundries.io --- board/toradex/apalis_imx6/apalis_imx6.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index fa7fcc8d46..ef668fcedc 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -1121,6 +1121,16 @@ void board_init_f(ulong dummy) board_init_r(NULL, 0); }
+#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + if (!strcmp(name, "imx6-apalis")) + return 0; + + return -1; +} +#endif + void reset_cpu(ulong addr) { }
Subject: [PATCH] apalis_imx6: add board_fit_config_name_match to support FIT in SPL
Only one dtb is currently supported, so match with imx6-apalis.
Signed-off-by: Ricardo Salveti ricardo@foundries.io
board/toradex/apalis_imx6/apalis_imx6.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index fa7fcc8d46..ef668fcedc 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -1121,6 +1121,16 @@ void board_init_f(ulong dummy) board_init_r(NULL, 0); }
+#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) {
- if (!strcmp(name, "imx6-apalis"))
return 0;- return -1;
+} +#endif
void reset_cpu(ulong addr) { }
Reviewed-by: Peng Fan peng.fan@nxp.com
-- 2.23.0
On Mon, 2019-09-02 at 18:23 -0300, Ricardo Salveti wrote:
Only one dtb is currently supported, so match with imx6-apalis.
Signed-off-by: Ricardo Salveti ricardo@foundries.io
board/toradex/apalis_imx6/apalis_imx6.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index fa7fcc8d46..ef668fcedc 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -1121,6 +1121,16 @@ void board_init_f(ulong dummy) board_init_r(NULL, 0); }
+#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{
- if (!strcmp(name, "imx6-apalis"))
return 0;- return -1;
+} +#endif
void reset_cpu(ulong addr) { }
I assume that you do not want to switch on CONFIG_SPL_LOAD_FIT (or OP-TEE) for the apalis_imx6_defconfig but do this rather as a preparation for a board variant.
Acked-by: Max Krummenacher max.krummenacher@toradex.com
participants (3)
-
Max Krummenacher -
Peng Fan -
Ricardo Salveti