[PATCH] arm: dts: k3-j7200: Sync with Linux 6.7-rc1

Sync u-boot device tree with Linux kernel 6.7-rc1
Signed-off-by: Reid Tonking reidt@ti.com --- Boot-log: https://gist.github.com/reidt1/db5426f2a778369db8c3699cf293b94f
arch/arm/dts/k3-j7200-main.dtsi | 2 +- arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 9 ++++++++- 2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi index cdb1d6b2a9..264913f832 100644 --- a/arch/arm/dts/k3-j7200-main.dtsi +++ b/arch/arm/dts/k3-j7200-main.dtsi @@ -91,7 +91,7 @@ };
main_navss: bus@30000000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi index 6ffaf85fa6..3fc588b848 100644 --- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi @@ -318,7 +318,7 @@ };
mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; @@ -637,4 +637,11 @@ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; + + mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + ti,esm-pins = <95>; + bootph-pre-ram; + }; };

Thanks Reid for sync.
On 11/14/2023 2:13 AM, Reid Tonking wrote:
Sync u-boot device tree with Linux kernel 6.7-rc1
Signed-off-by: Reid Tonking reidt@ti.com
Boot-log: https://gist.github.com/reidt1/db5426f2a778369db8c3699cf293b94f
arch/arm/dts/k3-j7200-main.dtsi | 2 +- arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 9 ++++++++- 2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi index cdb1d6b2a9..264913f832 100644 --- a/arch/arm/dts/k3-j7200-main.dtsi +++ b/arch/arm/dts/k3-j7200-main.dtsi @@ -91,7 +91,7 @@ };
main_navss: bus@30000000 {
compatible = "simple-mfd";
#address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;compatible = "simple-bus";
diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi index 6ffaf85fa6..3fc588b848 100644 --- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi @@ -318,7 +318,7 @@ };
mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;compatible = "simple-bus";
@@ -637,4 +637,11 @@ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; };
- mcu_esm: esm@40800000 {
compatible = "ti,j721e-esm";
reg = <0x00 0x40800000 0x00 0x1000>;
ti,esm-pins = <95>;
bootph-pre-ram;
- }; };
Please take care of actual usage of this node
https://lore.kernel.org/all/20231003081038.24299-10-j-keerthy@ti.com/
https://lore.kernel.org/all/20231003081038.24299-11-j-keerthy@ti.com/
https://lore.kernel.org/all/838b07a0-8490-c05b-b08f-3ab6d3e1737a@ti.com/

Hi Udit
On 14/11/23 11:07, Kumar, Udit wrote:
Thanks Reid for sync.
On 11/14/2023 2:13 AM, Reid Tonking wrote:
Sync u-boot device tree with Linux kernel 6.7-rc1
Signed-off-by: Reid Tonking reidt@ti.com
Boot-log: https://gist.github.com/reidt1/db5426f2a778369db8c3699cf293b94f
arch/arm/dts/k3-j7200-main.dtsi | 2 +- arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 9 ++++++++- 2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi index cdb1d6b2a9..264913f832 100644 --- a/arch/arm/dts/k3-j7200-main.dtsi +++ b/arch/arm/dts/k3-j7200-main.dtsi @@ -91,7 +91,7 @@ }; main_navss: bus@30000000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi index 6ffaf85fa6..3fc588b848 100644 --- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi @@ -318,7 +318,7 @@ }; mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; @@ -637,4 +637,11 @@ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; };
+ mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + ti,esm-pins = <95>; + bootph-pre-ram; + }; };
Please take care of actual usage of this node
This need not be taken up within the sync itself right? I am planning on reviving Keerthy's patches once the J7 syncs are in.
https://lore.kernel.org/all/20231003081038.24299-10-j-keerthy@ti.com/
https://lore.kernel.org/all/20231003081038.24299-11-j-keerthy@ti.com/
https://lore.kernel.org/all/838b07a0-8490-c05b-b08f-3ab6d3e1737a@ti.com/

On 11/16/2023 1:40 PM, Neha Malcom Francis wrote:
Hi Udit
On 14/11/23 11:07, Kumar, Udit wrote:
Thanks Reid for sync.
On 11/14/2023 2:13 AM, Reid Tonking wrote:
Sync u-boot device tree with Linux kernel 6.7-rc1
Signed-off-by: Reid Tonking reidt@ti.com
Boot-log: https://gist.github.com/reidt1/db5426f2a778369db8c3699cf293b94f
arch/arm/dts/k3-j7200-main.dtsi | 2 +- arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 9 ++++++++- 2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi index cdb1d6b2a9..264913f832 100644 --- a/arch/arm/dts/k3-j7200-main.dtsi +++ b/arch/arm/dts/k3-j7200-main.dtsi @@ -91,7 +91,7 @@ }; main_navss: bus@30000000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi index 6ffaf85fa6..3fc588b848 100644 --- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi @@ -318,7 +318,7 @@ }; mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; @@ -637,4 +637,11 @@ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; };
+ mcu_esm: esm@40800000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x40800000 0x00 0x1000>; + ti,esm-pins = <95>; + bootph-pre-ram; + }; };
Please take care of actual usage of this node
This need not be taken up within the sync itself right? I am planning on reviving Keerthy's patches once the J7 syncs are in.
Its up-to you , how you want to take care of probing of this driver in this or other series.
Thanks
Udit
https://lore.kernel.org/all/20231003081038.24299-10-j-keerthy@ti.com/
https://lore.kernel.org/all/20231003081038.24299-11-j-keerthy@ti.com/
https://lore.kernel.org/all/838b07a0-8490-c05b-b08f-3ab6d3e1737a@ti.com/

On Mon, Nov 13, 2023 at 02:43:09PM -0600, Reid Tonking wrote:
Sync u-boot device tree with Linux kernel 6.7-rc1
Signed-off-by: Reid Tonking reidt@ti.com
Applied to u-boot/next, thanks!
participants (4)
-
Kumar, Udit
-
Neha Malcom Francis
-
Reid Tonking
-
Tom Rini