[U-Boot-Users] ATI Radeon M6-C16h for PPC 440GX
Hello,
i´m using on my custom board with PPC 440GX a ATI M6 Mobility Radeon with kernel 2.6.12. Now i have to initialize the ati and configure the kernel to support it. I don´t have the BIOS of ATI for PPC and i like to simulate this BIOS with U-boot. How can i configure the U-boot for ATI to initialize or how can i write the programm for ATI- EEPROM BIOS? must i install a XF86-Simulator on my board?
Roberto Pavon
In message 000401c5bcfa$42609940$8700a8c0@SN7855 you wrote:
i´m using on my custom board with PPC 440GX a ATI M6 Mobility Radeon with kernel 2.6.12. Now i have to initialize the ati and configure the kernel to support it. I don´t have the BIOS of ATI for PPC and i like to simulate this BIOS with U-boot. How can i configure the U-boot for ATI to initialize or how can i write the programm for ATI- EEPROM BIOS?
This is somewhat off topic here. We don't deal with internals of graphics adapter code.
must i install a XF86-Simulator on my board?
You can try enabling the x86 emulator that comesincluded with U-Boot and use this to run the x86 BIOS code on the card like it was done for the AmigaOne board.
Best regards,
Wolfgang Denk
participants (2)
-
Roberto Pavon Sierra -
Wolfgang Denk