I believe these code was copied from 74xx family, but for 86xx, it is unused.

Signed-off-by: Dave Liu daveliu@freescale.com --- cpu/mpc86xx/start.S | 14 -------------- 1 files changed, 0 insertions(+), 14 deletions(-)

diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 30e6047..ab672d1 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -647,16 +647,6 @@ relocate_code: /* * Now relocate code */ -#ifdef CONFIG_ECC - bl board_relocate_rom - sync - mr r3, r10 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ -#else cmplw cr1,r3,r4 addi r0,r5,3 srwi. r0,r0,2 @@ -678,7 +668,6 @@ relocate_code: 3: lwzu r0,-4(r8) stwu r0,-4(r7) bdnz 3b -#endif /* * Now flush the cache: note that we must start from a cache aligned * address. Otherwise we might miss one cache line. @@ -711,9 +700,6 @@ relocate_code: blr

in_ram: -#ifdef CONFIG_ECC - bl board_init_ecc -#endif /* * Relocation Function, r14 point to got2+0x8000 *