[U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings
This patch performs the pinmux configuration in a common file. As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com --- arch/arm/cpu/armv7/exynos/pinmux.c | 189 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++ 2 files changed, 266 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..11f4b71 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,189 @@ +/* + * Copyright (c) 2012 Samsung Electronics. + * Abhilash Kesavan a.kesavan@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h> + +int exynos5_pinmux_config(int peripheral, int flags) +{ + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct s5p_gpio_bank *bank, *bank_ext; + int i, start, count; + + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + switch (peripheral) { + case PERIPH_ID_UART0: + bank = &gpio1->a0; + start = 0; count = 4; + break; + case PERIPH_ID_UART1: + bank = &gpio1->a0; + start = 4; count = 4; + break; + case PERIPH_ID_UART2: + bank = &gpio1->a1; + start = 0; count = 4; + break; + case PERIPH_ID_UART3: + bank = &gpio1->a1; + start = 4; count = 2; + break; + } + for (i = start; i < start + count; i++) { + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + } + break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC3: + switch (peripheral) { + case PERIPH_ID_SDMMC0: + bank = &gpio1->c0; bank_ext = &gpio1->c1; + break; + case PERIPH_ID_SDMMC1: + bank = &gpio1->c1; bank_ext = NULL; + break; + case PERIPH_ID_SDMMC2: + bank = &gpio1->c2; bank_ext = &gpio1->c3; + break; + case PERIPH_ID_SDMMC3: + bank = &gpio1->c3; bank_ext = NULL; + break; + } + if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) { + debug("SDMMC device %d does not support 8bit mode", + peripheral); + return -1; + } + if (flags & PINMUX_FLAG_8BIT_MODE) { + for (i = 3; i <= 6; i++) { + s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP); + s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); + } + } + for (i = 0; i < 2; i++) { + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + for (i = 3; i <= 6; i++) { + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + break; + case PERIPH_ID_SROMC: + /* + * SROM:CS1 and EBI + * + * GPY0[0] SROM_CSn[0] + * GPY0[1] SROM_CSn[1](2) + * GPY0[2] SROM_CSn[2] + * GPY0[3] SROM_CSn[3] + * GPY0[4] EBI_OEn(2) + * GPY0[5] EBI_EEn(2) + * + * GPY1[0] EBI_BEn[0](2) + * GPY1[1] EBI_BEn[1](2) + * GPY1[2] SROM_WAIT(2) + * GPY1[3] EBI_DATA_RDn(2) + */ + s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK), + GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2)); + + for (i = 0; i < 4; i++) + s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2)); + + /* + * EBI: 8 Addrss Lines + * + * GPY3[0] EBI_ADDR[0](2) + * GPY3[1] EBI_ADDR[1](2) + * GPY3[2] EBI_ADDR[2](2) + * GPY3[3] EBI_ADDR[3](2) + * GPY3[4] EBI_ADDR[4](2) + * GPY3[5] EBI_ADDR[5](2) + * GPY3[6] EBI_ADDR[6](2) + * GPY3[7] EBI_ADDR[7](2) + * + * EBI: 16 Data Lines + * + * GPY5[0] EBI_DATA[0](2) + * GPY5[1] EBI_DATA[1](2) + * GPY5[2] EBI_DATA[2](2) + * GPY5[3] EBI_DATA[3](2) + * GPY5[4] EBI_DATA[4](2) + * GPY5[5] EBI_DATA[5](2) + * GPY5[6] EBI_DATA[6](2) + * GPY5[7] EBI_DATA[7](2) + * + * GPY6[0] EBI_DATA[8](2) + * GPY6[1] EBI_DATA[9](2) + * GPY6[2] EBI_DATA[10](2) + * GPY6[3] EBI_DATA[11](2) + * GPY6[4] EBI_DATA[12](2) + * GPY6[5] EBI_DATA[13](2) + * GPY6[6] EBI_DATA[14](2) + * GPY6[7] EBI_DATA[15](2) + */ + for (i = 0; i < 8; i++) { + s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP); + + s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP); + + s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP); + } + break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + +int exynos_pinmux_config(int peripheral, int flags) +{ + if (cpu_is_exynos5()) + return exynos5_pinmux_config(peripheral, flags); + else{ + debug("pinmux functionality not supported\n"); + return -1; + } +} diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..306f521 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Abhilash Kesavan a.kesavan@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H + +/* + * Peripherals requiring clock/pinmux configuration. List will + * grow with support for more devices getting added. + * + */ +enum periph_id { + PERIPH_ID_SDMMC0, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC2, + PERIPH_ID_SDMMC3, + PERIPH_ID_SDMMC4, + PERIPH_ID_SROMC, + PERIPH_ID_UART0, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_UART3, + + PERIPH_ID_COUNT, + PERIPH_ID_NONE = -1, +}; + +/* + * Flags for setting specific configarations of peripherals. + * List will grow with support for more devices getting added. + */ +enum { + PINMUX_FLAG_NONE = 0x00000000, + + /* Flags for eMMC */ + PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */ + + /* Flags for SROM controller */ + PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */ + PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */ +}; + +/** + * Configures the pinmux for a particular peripheral. + * + * Each gpio can be configured in many different ways (4 bits on exynos) + * such as "input", "output", "special function", "external interrupt" + * etc. This function will configure the peripheral pinmux along with + * pull-up/down and drive strength. + * + * @param peripheral peripheral to be configured + * @param flags configure flags + * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + */ +int exynos_pinmux_config(int peripheral, int flags); + +#endif
Use the pinmux configuration function for SMDK5250.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com --- arch/arm/cpu/armv7/exynos/Makefile | 2 +- board/samsung/smdk5250/smdk5250.c | 160 ++++++------------------------------ 2 files changed, 26 insertions(+), 136 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index 90ec2bd..9119961 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o +COBJS += clock.o power.o soc.o system.o pinmux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 32786e2..4c0398d 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -26,6 +26,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> #include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR; @@ -35,72 +36,7 @@ struct exynos5_gpio_part1 *gpio1; static void smc9115_pre_init(void) { u32 smc_bw_conf, smc_bc_conf; - int i; - - /* - * SROM:CS1 and EBI - * - * GPY0[0] SROM_CSn[0] - * GPY0[1] SROM_CSn[1](2) - * GPY0[2] SROM_CSn[2] - * GPY0[3] SROM_CSn[3] - * GPY0[4] EBI_OEn(2) - * GPY0[5] EBI_EEn(2) - * - * GPY1[0] EBI_BEn[0](2) - * GPY1[1] EBI_BEn[1](2) - * GPY1[2] SROM_WAIT(2) - * GPY1[3] EBI_DATA_RDn(2) - */ - s5p_gpio_cfg_pin(&gpio1->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2)); - s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2)); - s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2)); - - for (i = 0; i < 4; i++) - s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2)); - - /* - * EBI: 8 Addrss Lines - * - * GPY3[0] EBI_ADDR[0](2) - * GPY3[1] EBI_ADDR[1](2) - * GPY3[2] EBI_ADDR[2](2) - * GPY3[3] EBI_ADDR[3](2) - * GPY3[4] EBI_ADDR[4](2) - * GPY3[5] EBI_ADDR[5](2) - * GPY3[6] EBI_ADDR[6](2) - * GPY3[7] EBI_ADDR[7](2) - * - * EBI: 16 Data Lines - * - * GPY5[0] EBI_DATA[0](2) - * GPY5[1] EBI_DATA[1](2) - * GPY5[2] EBI_DATA[2](2) - * GPY5[3] EBI_DATA[3](2) - * GPY5[4] EBI_DATA[4](2) - * GPY5[5] EBI_DATA[5](2) - * GPY5[6] EBI_DATA[6](2) - * GPY5[7] EBI_DATA[7](2) - * - * GPY6[0] EBI_DATA[8](2) - * GPY6[1] EBI_DATA[9](2) - * GPY6[2] EBI_DATA[10](2) - * GPY6[3] EBI_DATA[11](2) - * GPY6[4] EBI_DATA[12](2) - * GPY6[5] EBI_DATA[13](2) - * GPY6[6] EBI_DATA[14](2) - * GPY6[7] EBI_DATA[15](2) - */ - for (i = 0; i < 8; i++) { - s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2)); - s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP); - - s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2)); - s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP); - - s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2)); - s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP); - } + int err;
/* Ethernet needs data bus width of 16 bits */ smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK) @@ -112,6 +48,11 @@ static void smc9115_pre_init(void) | SROMC_BC_PMC(0x01);
/* Select and configure the SROMC bank */ + err = exynos_pinmux_config(PERIPH_ID_SROMC, + CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT); + if (err < 0) + debug("SROMC not configured\n"); + s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf); } #endif @@ -186,31 +127,12 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - int i, err; - - /* - * MMC2 SD card GPIO: - * - * GPC2[0] SD_2_CLK(2) - * GPC2[1] SD_2_CMD(2) - * GPC2[2] SD_2_CDn - * GPC2[3:6] SD_2_DATA[0:3](2) - */ - for (i = 0; i < 7; i++) { - /* GPC2[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2)); + int err;
- /* GPK2[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X); - - /* GPK2[0:1] pull disable */ - if (i == 0 || i == 1) { - s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_NONE); - continue; - } - - /* GPK2[2:6] pull up */ - s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP); + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err < 0) { + debug("SDMMC2 not configured\n"); + return err; }
err = s5p_mmc_init(2, 4); @@ -220,55 +142,23 @@ int board_mmc_init(bd_t *bis)
static void board_uart_init(void) { - struct exynos5_gpio_part1 *gpio1 = - (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); - int i; + int err;
- /* - * UART0 GPIOs : GPA0CON[3:0] 0x2222 - * Must set CFG17 switches to select UART0 to use. - */ - for (i = 0; i <= 3; i++) { - s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2)); - } + err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE); + if (err < 0) + debug("UART0 not configured\n");
- /* - * UART1 GPIOs : GPA0CON[5:4] 0x22 - * Must set CFG17 switches to select UART1 to use. - * - * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down - * in order to use them (so that those pins can be used for I2C). - */ - for (i = 4; i <= 5; i++) { - s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2)); - } + err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE); + if (err < 0) + debug("UART1 not configured\n");
- /* - * UART2 GPIOs : GPA1CON[1:0] 0x22 - * Must set CFG17 switches to select UART2 to use. - * - * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down - * in order to use them (so that those pins can be used for I2C). - */ - for (i = 0; i <= 1; i++) { - s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2)); - } - - /* - * UART3 GPIOs : GPA1CON[5:4] 0x22 - * Must set CFG16 switches to select UART3 to use. - */ - for (i = 4; i <= 5; i++) { - s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2)); - } + err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE); + if (err < 0) + debug("UART2 not configured\n");
- /* - * There's no mux for UART4--it's internal only - */ + err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); + if (err < 0) + debug("UART3 not configured\n"); }
#ifdef CONFIG_BOARD_EARLY_INIT_F
Hi,
On 4 May 2012 12:26, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
Use the pinmux configuration function for SMDK5250.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/Makefile | 2 +- board/samsung/smdk5250/smdk5250.c | 160 ++++++------------------------------ 2 files changed, 26 insertions(+), 136 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index 90ec2bd..9119961 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o +COBJS += clock.o power.o soc.o system.o pinmux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 32786e2..4c0398d 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -26,6 +26,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> #include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR; @@ -35,72 +36,7 @@ struct exynos5_gpio_part1 *gpio1;
Do we need this declaration as gpio init is done using pinmux. And remove the same from board_init.
static void smc9115_pre_init(void) { u32 smc_bw_conf, smc_bc_conf;
- int i;
- /*
- * SROM:CS1 and EBI
- *
- * GPY0[0] SROM_CSn[0]
- * GPY0[1] SROM_CSn[1](2)
- * GPY0[2] SROM_CSn[2]
- * GPY0[3] SROM_CSn[3]
- * GPY0[4] EBI_OEn(2)
- * GPY0[5] EBI_EEn(2)
- *
- * GPY1[0] EBI_BEn[0](2)
- * GPY1[1] EBI_BEn[1](2)
- * GPY1[2] SROM_WAIT(2)
- * GPY1[3] EBI_DATA_RDn(2)
- */
- s5p_gpio_cfg_pin(&gpio1->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
- for (i = 0; i < 4; i++)
- s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
- /*
- * EBI: 8 Addrss Lines
- *
- * GPY3[0] EBI_ADDR[0](2)
- * GPY3[1] EBI_ADDR[1](2)
- * GPY3[2] EBI_ADDR[2](2)
- * GPY3[3] EBI_ADDR[3](2)
- * GPY3[4] EBI_ADDR[4](2)
- * GPY3[5] EBI_ADDR[5](2)
- * GPY3[6] EBI_ADDR[6](2)
- * GPY3[7] EBI_ADDR[7](2)
- *
- * EBI: 16 Data Lines
- *
- * GPY5[0] EBI_DATA[0](2)
- * GPY5[1] EBI_DATA[1](2)
- * GPY5[2] EBI_DATA[2](2)
- * GPY5[3] EBI_DATA[3](2)
- * GPY5[4] EBI_DATA[4](2)
- * GPY5[5] EBI_DATA[5](2)
- * GPY5[6] EBI_DATA[6](2)
- * GPY5[7] EBI_DATA[7](2)
- *
- * GPY6[0] EBI_DATA[8](2)
- * GPY6[1] EBI_DATA[9](2)
- * GPY6[2] EBI_DATA[10](2)
- * GPY6[3] EBI_DATA[11](2)
- * GPY6[4] EBI_DATA[12](2)
- * GPY6[5] EBI_DATA[13](2)
- * GPY6[6] EBI_DATA[14](2)
- * GPY6[7] EBI_DATA[15](2)
- */
- for (i = 0; i < 8; i++) {
- s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
- }
- int err;
/* Ethernet needs data bus width of 16 bits */ smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK) @@ -112,6 +48,11 @@ static void smc9115_pre_init(void) | SROMC_BC_PMC(0x01);
/* Select and configure the SROMC bank */
- err = exynos_pinmux_config(PERIPH_ID_SROMC,
- CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT);
- if (err < 0)
- debug("SROMC not configured\n");
s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf); } #endif @@ -186,31 +127,12 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) {
- int i, err;
- /*
- * MMC2 SD card GPIO:
- *
- * GPC2[0] SD_2_CLK(2)
- * GPC2[1] SD_2_CMD(2)
- * GPC2[2] SD_2_CDn
- * GPC2[3:6] SD_2_DATA[0:3](2)
- */
- for (i = 0; i < 7; i++) {
- /* GPC2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2));
- int err;
- /* GPK2[0:6] drv 4x */
- s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X);
- /* GPK2[0:1] pull disable */
- if (i == 0 || i == 1) {
- s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_NONE);
- continue;
- }
- /* GPK2[2:6] pull up */
- s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP);
- err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
- if (err < 0) {
- debug("SDMMC2 not configured\n");
- return err;
}
err = s5p_mmc_init(2, 4); @@ -220,55 +142,23 @@ int board_mmc_init(bd_t *bis)
static void board_uart_init(void) {
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- int i;
- int err;
- /*
- * UART0 GPIOs : GPA0CON[3:0] 0x2222
- * Must set CFG17 switches to select UART0 to use.
- */
- for (i = 0; i <= 3; i++) {
- s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
- }
- err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART0 not configured\n");
- /*
- * UART1 GPIOs : GPA0CON[5:4] 0x22
- * Must set CFG17 switches to select UART1 to use.
- *
- * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down
- * in order to use them (so that those pins can be used for I2C).
- */
- for (i = 4; i <= 5; i++) {
- s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
- }
- err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART1 not configured\n");
- /*
- * UART2 GPIOs : GPA1CON[1:0] 0x22
- * Must set CFG17 switches to select UART2 to use.
- *
- * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down
- * in order to use them (so that those pins can be used for I2C).
- */
- for (i = 0; i <= 1; i++) {
- s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));
- }
- /*
- * UART3 GPIOs : GPA1CON[5:4] 0x22
- * Must set CFG16 switches to select UART3 to use.
- */
- for (i = 4; i <= 5; i++) {
- s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));
- }
- err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART2 not configured\n");
- /*
- * There's no mux for UART4--it's internal only
- */
- err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART3 not configured\n");
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
1.7.4.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi Chander,
Thank you for comments
On Wed, May 23, 2012 at 11:35 AM, Chander Kashyap chander.kashyap@linaro.org wrote:
Hi,
On 4 May 2012 12:26, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
Use the pinmux configuration function for SMDK5250.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/Makefile | 2 +- board/samsung/smdk5250/smdk5250.c | 160 ++++++------------------------------ 2 files changed, 26 insertions(+), 136 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index 90ec2bd..9119961 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o +COBJS += clock.o power.o soc.o system.o pinmux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 32786e2..4c0398d 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -26,6 +26,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> #include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR; @@ -35,72 +36,7 @@ struct exynos5_gpio_part1 *gpio1;
Do we need this declaration as gpio init is done using pinmux. And remove the same from board_init.
- will do so
static void smc9115_pre_init(void) { u32 smc_bw_conf, smc_bc_conf;
- int i;
- /*
- * SROM:CS1 and EBI
- *
- * GPY0[0] SROM_CSn[0]
- * GPY0[1] SROM_CSn[1](2)
- * GPY0[2] SROM_CSn[2]
- * GPY0[3] SROM_CSn[3]
- * GPY0[4] EBI_OEn(2)
- * GPY0[5] EBI_EEn(2)
- *
- * GPY1[0] EBI_BEn[0](2)
- * GPY1[1] EBI_BEn[1](2)
- * GPY1[2] SROM_WAIT(2)
- * GPY1[3] EBI_DATA_RDn(2)
- */
- s5p_gpio_cfg_pin(&gpio1->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
- for (i = 0; i < 4; i++)
- s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
- /*
- * EBI: 8 Addrss Lines
- *
- * GPY3[0] EBI_ADDR[0](2)
- * GPY3[1] EBI_ADDR[1](2)
- * GPY3[2] EBI_ADDR[2](2)
- * GPY3[3] EBI_ADDR[3](2)
- * GPY3[4] EBI_ADDR[4](2)
- * GPY3[5] EBI_ADDR[5](2)
- * GPY3[6] EBI_ADDR[6](2)
- * GPY3[7] EBI_ADDR[7](2)
- *
- * EBI: 16 Data Lines
- *
- * GPY5[0] EBI_DATA[0](2)
- * GPY5[1] EBI_DATA[1](2)
- * GPY5[2] EBI_DATA[2](2)
- * GPY5[3] EBI_DATA[3](2)
- * GPY5[4] EBI_DATA[4](2)
- * GPY5[5] EBI_DATA[5](2)
- * GPY5[6] EBI_DATA[6](2)
- * GPY5[7] EBI_DATA[7](2)
- *
- * GPY6[0] EBI_DATA[8](2)
- * GPY6[1] EBI_DATA[9](2)
- * GPY6[2] EBI_DATA[10](2)
- * GPY6[3] EBI_DATA[11](2)
- * GPY6[4] EBI_DATA[12](2)
- * GPY6[5] EBI_DATA[13](2)
- * GPY6[6] EBI_DATA[14](2)
- * GPY6[7] EBI_DATA[15](2)
- */
- for (i = 0; i < 8; i++) {
- s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
- }
- int err;
/* Ethernet needs data bus width of 16 bits */ smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK) @@ -112,6 +48,11 @@ static void smc9115_pre_init(void) | SROMC_BC_PMC(0x01);
/* Select and configure the SROMC bank */
- err = exynos_pinmux_config(PERIPH_ID_SROMC,
- CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT);
- if (err < 0)
- debug("SROMC not configured\n");
s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf); } #endif @@ -186,31 +127,12 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) {
- int i, err;
- /*
- * MMC2 SD card GPIO:
- *
- * GPC2[0] SD_2_CLK(2)
- * GPC2[1] SD_2_CMD(2)
- * GPC2[2] SD_2_CDn
- * GPC2[3:6] SD_2_DATA[0:3](2)
- */
- for (i = 0; i < 7; i++) {
- /* GPC2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2));
- int err;
- /* GPK2[0:6] drv 4x */
- s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X);
- /* GPK2[0:1] pull disable */
- if (i == 0 || i == 1) {
- s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_NONE);
- continue;
- }
- /* GPK2[2:6] pull up */
- s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP);
- err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
- if (err < 0) {
- debug("SDMMC2 not configured\n");
- return err;
}
err = s5p_mmc_init(2, 4); @@ -220,55 +142,23 @@ int board_mmc_init(bd_t *bis)
static void board_uart_init(void) {
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- int i;
- int err;
- /*
- * UART0 GPIOs : GPA0CON[3:0] 0x2222
- * Must set CFG17 switches to select UART0 to use.
- */
- for (i = 0; i <= 3; i++) {
- s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
- }
- err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART0 not configured\n");
- /*
- * UART1 GPIOs : GPA0CON[5:4] 0x22
- * Must set CFG17 switches to select UART1 to use.
- *
- * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down
- * in order to use them (so that those pins can be used for I2C).
- */
- for (i = 4; i <= 5; i++) {
- s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
- }
- err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART1 not configured\n");
- /*
- * UART2 GPIOs : GPA1CON[1:0] 0x22
- * Must set CFG17 switches to select UART2 to use.
- *
- * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down
- * in order to use them (so that those pins can be used for I2C).
- */
- for (i = 0; i <= 1; i++) {
- s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));
- }
- /*
- * UART3 GPIOs : GPA1CON[5:4] 0x22
- * Must set CFG16 switches to select UART3 to use.
- */
- for (i = 4; i <= 5; i++) {
- s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));
- }
- err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART2 not configured\n");
- /*
- * There's no mux for UART4--it's internal only
- */
- err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
- if (err < 0)
- debug("UART3 not configured\n");
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
1.7.4.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- with warm regards, Chander Kashyap _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Regards, Rajeshwari Shinde
Hi,
On Wed, May 23, 2012 at 1:49 AM, Rajeshwari Birje < rajeshwari.birje@gmail.com> wrote:
Hi Chander,
Thank you for comments
On Wed, May 23, 2012 at 11:35 AM, Chander Kashyap chander.kashyap@linaro.org wrote:
Hi,
On 4 May 2012 12:26, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
Use the pinmux configuration function for SMDK5250.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/Makefile | 2 +- board/samsung/smdk5250/smdk5250.c | 160
++++++------------------------------
2 files changed, 26 insertions(+), 136 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/Makefile
b/arch/arm/cpu/armv7/exynos/Makefile
index 90ec2bd..9119961 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o +COBJS += clock.o power.o soc.o system.o pinmux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/board/samsung/smdk5250/smdk5250.c
b/board/samsung/smdk5250/smdk5250.c
index 32786e2..4c0398d 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -26,6 +26,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> #include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR; @@ -35,72 +36,7 @@ struct exynos5_gpio_part1 *gpio1;
Do we need this declaration as gpio init is done using pinmux. And remove the same from board_init.
- will do so
static void smc9115_pre_init(void) { u32 smc_bw_conf, smc_bc_conf;
int i;/** SROM:CS1 and EBI** GPY0[0] SROM_CSn[0]* GPY0[1] SROM_CSn[1](2)* GPY0[2] SROM_CSn[2]* GPY0[3] SROM_CSn[3]* GPY0[4] EBI_OEn(2)* GPY0[5] EBI_EEn(2)** GPY1[0] EBI_BEn[0](2)* GPY1[1] EBI_BEn[1](2)* GPY1[2] SROM_WAIT(2)* GPY1[3] EBI_DATA_RDn(2)*/s5p_gpio_cfg_pin(&gpio1->y0, CONFIG_ENV_SROM_BANK,GPIO_FUNC(2));
s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));for (i = 0; i < 4; i++)s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));/** EBI: 8 Addrss Lines** GPY3[0] EBI_ADDR[0](2)* GPY3[1] EBI_ADDR[1](2)* GPY3[2] EBI_ADDR[2](2)* GPY3[3] EBI_ADDR[3](2)* GPY3[4] EBI_ADDR[4](2)* GPY3[5] EBI_ADDR[5](2)* GPY3[6] EBI_ADDR[6](2)* GPY3[7] EBI_ADDR[7](2)** EBI: 16 Data Lines** GPY5[0] EBI_DATA[0](2)* GPY5[1] EBI_DATA[1](2)* GPY5[2] EBI_DATA[2](2)* GPY5[3] EBI_DATA[3](2)* GPY5[4] EBI_DATA[4](2)* GPY5[5] EBI_DATA[5](2)* GPY5[6] EBI_DATA[6](2)* GPY5[7] EBI_DATA[7](2)** GPY6[0] EBI_DATA[8](2)* GPY6[1] EBI_DATA[9](2)* GPY6[2] EBI_DATA[10](2)* GPY6[3] EBI_DATA[11](2)* GPY6[4] EBI_DATA[12](2)* GPY6[5] EBI_DATA[13](2)* GPY6[6] EBI_DATA[14](2)* GPY6[7] EBI_DATA[15](2)*/for (i = 0; i < 8; i++) {s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);}
int err; /* Ethernet needs data bus width of 16 bits */ smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK)@@ -112,6 +48,11 @@ static void smc9115_pre_init(void) | SROMC_BC_PMC(0x01);
/* Select and configure the SROMC bank */
err = exynos_pinmux_config(PERIPH_ID_SROMC,CONFIG_ENV_SROM_BANK |PINMUX_FLAG_16BIT);
if (err < 0)debug("SROMC not configured\n");
Perhaps return -1 here?
s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);} #endif @@ -186,31 +127,12 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) {
int i, err;/** MMC2 SD card GPIO:** GPC2[0] SD_2_CLK(2)* GPC2[1] SD_2_CMD(2)* GPC2[2] SD_2_CDn* GPC2[3:6] SD_2_DATA[0:3](2)*/for (i = 0; i < 7; i++) {/* GPC2[0:6] special function 2 */s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2));
int err;
/* GPK2[0:6] drv 4x */s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X);/* GPK2[0:1] pull disable */if (i == 0 || i == 1) {s5p_gpio_set_pull(&gpio1->c2, i,GPIO_PULL_NONE);
continue;}/* GPK2[2:6] pull up */s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP);
err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);if (err < 0) {debug("SDMMC2 not configured\n");return err; } err = s5p_mmc_init(2, 4);@@ -220,55 +142,23 @@ int board_mmc_init(bd_t *bis)
static void board_uart_init(void) {
struct exynos5_gpio_part1 *gpio1 =(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
int i;
int err;
/** UART0 GPIOs : GPA0CON[3:0] 0x2222* Must set CFG17 switches to select UART0 to use.*/for (i = 0; i <= 3; i++) {s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));}
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);if (err < 0)debug("UART0 not configured\n");
/** UART1 GPIOs : GPA0CON[5:4] 0x22* Must set CFG17 switches to select UART1 to use.** This only sets RXD/TXD, as RTS/CTS need a resistor soldereddown
* in order to use them (so that those pins can be used forI2C).
*/for (i = 4; i <= 5; i++) {s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));}
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);if (err < 0)debug("UART1 not configured\n");
/** UART2 GPIOs : GPA1CON[1:0] 0x22* Must set CFG17 switches to select UART2 to use.** This only sets RXD/TXD, as RTS/CTS need a resistor soldereddown
* in order to use them (so that those pins can be used forI2C).
*/for (i = 0; i <= 1; i++) {s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));}/** UART3 GPIOs : GPA1CON[5:4] 0x22* Must set CFG16 switches to select UART3 to use.*/for (i = 4; i <= 5; i++) {s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2));}
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);if (err < 0)debug("UART2 not configured\n");
/** There's no mux for UART4--it's internal only*/
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);if (err < 0)debug("UART3 not configured\n");}
#ifdef CONFIG_BOARD_EARLY_INIT_F
1.7.4.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- with warm regards, Chander Kashyap _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Regards, Rajeshwari Shinde _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi All,
Please do let me know if any updates on the this patchset.
On Fri, May 4, 2012 at 12:26 PM, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
This patch performs the pinmux configuration in a common file. As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/pinmux.c | 189 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++ 2 files changed, 266 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..11f4b71 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,189 @@ +/*
- Copyright (c) 2012 Samsung Electronics.
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+int exynos5_pinmux_config(int peripheral, int flags) +{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank, *bank_ext;
- int i, start, count;
- switch (peripheral) {
- case PERIPH_ID_UART0:
- case PERIPH_ID_UART1:
- case PERIPH_ID_UART2:
- case PERIPH_ID_UART3:
- switch (peripheral) {
- case PERIPH_ID_UART0:
- bank = &gpio1->a0;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART1:
- bank = &gpio1->a0;
- start = 4; count = 4;
- break;
- case PERIPH_ID_UART2:
- bank = &gpio1->a1;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART3:
- bank = &gpio1->a1;
- start = 4; count = 2;
- break;
- }
- for (i = start; i < start + count; i++) {
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- }
- break;
- case PERIPH_ID_SDMMC0:
- case PERIPH_ID_SDMMC1:
- case PERIPH_ID_SDMMC2:
- case PERIPH_ID_SDMMC3:
- switch (peripheral) {
- case PERIPH_ID_SDMMC0:
- bank = &gpio1->c0; bank_ext = &gpio1->c1;
- break;
- case PERIPH_ID_SDMMC1:
- bank = &gpio1->c1; bank_ext = NULL;
- break;
- case PERIPH_ID_SDMMC2:
- bank = &gpio1->c2; bank_ext = &gpio1->c3;
- break;
- case PERIPH_ID_SDMMC3:
- bank = &gpio1->c3; bank_ext = NULL;
- break;
- }
- if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
- debug("SDMMC device %d does not support 8bit mode",
- peripheral);
- return -1;
- }
- if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
- s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
- }
- }
- for (i = 0; i < 2; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- break;
- case PERIPH_ID_SROMC:
- /*
- * SROM:CS1 and EBI
- *
- * GPY0[0] SROM_CSn[0]
- * GPY0[1] SROM_CSn[1](2)
- * GPY0[2] SROM_CSn[2]
- * GPY0[3] SROM_CSn[3]
- * GPY0[4] EBI_OEn(2)
- * GPY0[5] EBI_EEn(2)
- *
- * GPY1[0] EBI_BEn[0](2)
- * GPY1[1] EBI_BEn[1](2)
- * GPY1[2] SROM_WAIT(2)
- * GPY1[3] EBI_DATA_RDn(2)
- */
- s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
- GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
- for (i = 0; i < 4; i++)
- s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
- /*
- * EBI: 8 Addrss Lines
- *
- * GPY3[0] EBI_ADDR[0](2)
- * GPY3[1] EBI_ADDR[1](2)
- * GPY3[2] EBI_ADDR[2](2)
- * GPY3[3] EBI_ADDR[3](2)
- * GPY3[4] EBI_ADDR[4](2)
- * GPY3[5] EBI_ADDR[5](2)
- * GPY3[6] EBI_ADDR[6](2)
- * GPY3[7] EBI_ADDR[7](2)
- *
- * EBI: 16 Data Lines
- *
- * GPY5[0] EBI_DATA[0](2)
- * GPY5[1] EBI_DATA[1](2)
- * GPY5[2] EBI_DATA[2](2)
- * GPY5[3] EBI_DATA[3](2)
- * GPY5[4] EBI_DATA[4](2)
- * GPY5[5] EBI_DATA[5](2)
- * GPY5[6] EBI_DATA[6](2)
- * GPY5[7] EBI_DATA[7](2)
- *
- * GPY6[0] EBI_DATA[8](2)
- * GPY6[1] EBI_DATA[9](2)
- * GPY6[2] EBI_DATA[10](2)
- * GPY6[3] EBI_DATA[11](2)
- * GPY6[4] EBI_DATA[12](2)
- * GPY6[5] EBI_DATA[13](2)
- * GPY6[6] EBI_DATA[14](2)
- * GPY6[7] EBI_DATA[15](2)
- */
- for (i = 0; i < 8; i++) {
- s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
- }
- break;
- default:
- debug("%s: invalid peripheral %d", __func__, peripheral);
- return -1;
- }
- return 0;
+}
+int exynos_pinmux_config(int peripheral, int flags) +{
- if (cpu_is_exynos5())
- return exynos5_pinmux_config(peripheral, flags);
- else{
- debug("pinmux functionality not supported\n");
- return -1;
- }
+} diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..306f521 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,77 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H
+/*
- Peripherals requiring clock/pinmux configuration. List will
- grow with support for more devices getting added.
- */
+enum periph_id {
- PERIPH_ID_SDMMC0,
- PERIPH_ID_SDMMC1,
- PERIPH_ID_SDMMC2,
- PERIPH_ID_SDMMC3,
- PERIPH_ID_SDMMC4,
- PERIPH_ID_SROMC,
- PERIPH_ID_UART0,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
- PERIPH_ID_COUNT,
- PERIPH_ID_NONE = -1,
+};
+/*
- Flags for setting specific configarations of peripherals.
- List will grow with support for more devices getting added.
- */
+enum {
- PINMUX_FLAG_NONE = 0x00000000,
- /* Flags for eMMC */
- PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
- /* Flags for SROM controller */
- PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
- PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+};
+/**
- Configures the pinmux for a particular peripheral.
- Each gpio can be configured in many different ways (4 bits on exynos)
- such as "input", "output", "special function", "external interrupt"
- etc. This function will configure the peripheral pinmux along with
- pull-up/down and drive strength.
- @param peripheral peripheral to be configured
- @param flags configure flags
- @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
+int exynos_pinmux_config(int peripheral, int flags);
+#endif
1.7.4.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Regards, Rajeshwari Shinde.
ccng to Minkyu
---------- Forwarded message ---------- From: Rajeshwari Birje rajeshwari.birje@gmail.com Date: 18 May 2012 12:16 Subject: Re: [U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings To: Rajeshwari Shinde rajeshwari.s@samsung.com Cc: marex@denx.de, k.chander@samsung.com, patches@linaro.org, u-boot@lists.denx.de
Hi All,
Please do let me know if any updates on the this patchset.
On Fri, May 4, 2012 at 12:26 PM, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
This patch performs the pinmux configuration in a common file. As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/pinmux.c | 189 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++ 2 files changed, 266 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..11f4b71 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,189 @@ +/*
- Copyright (c) 2012 Samsung Electronics.
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+int exynos5_pinmux_config(int peripheral, int flags) +{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank, *bank_ext;
- int i, start, count;
- switch (peripheral) {
- case PERIPH_ID_UART0:
- case PERIPH_ID_UART1:
- case PERIPH_ID_UART2:
- case PERIPH_ID_UART3:
- switch (peripheral) {
- case PERIPH_ID_UART0:
- bank = &gpio1->a0;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART1:
- bank = &gpio1->a0;
- start = 4; count = 4;
- break;
- case PERIPH_ID_UART2:
- bank = &gpio1->a1;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART3:
- bank = &gpio1->a1;
- start = 4; count = 2;
- break;
- }
- for (i = start; i < start + count; i++) {
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- }
- break;
- case PERIPH_ID_SDMMC0:
- case PERIPH_ID_SDMMC1:
- case PERIPH_ID_SDMMC2:
- case PERIPH_ID_SDMMC3:
- switch (peripheral) {
- case PERIPH_ID_SDMMC0:
- bank = &gpio1->c0; bank_ext = &gpio1->c1;
- break;
- case PERIPH_ID_SDMMC1:
- bank = &gpio1->c1; bank_ext = NULL;
- break;
- case PERIPH_ID_SDMMC2:
- bank = &gpio1->c2; bank_ext = &gpio1->c3;
- break;
- case PERIPH_ID_SDMMC3:
- bank = &gpio1->c3; bank_ext = NULL;
- break;
- }
- if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
- debug("SDMMC device %d does not support 8bit mode",
- peripheral);
- return -1;
- }
- if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
- s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
- }
- }
- for (i = 0; i < 2; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- break;
- case PERIPH_ID_SROMC:
- /*
- * SROM:CS1 and EBI
- *
- * GPY0[0] SROM_CSn[0]
- * GPY0[1] SROM_CSn[1](2)
- * GPY0[2] SROM_CSn[2]
- * GPY0[3] SROM_CSn[3]
- * GPY0[4] EBI_OEn(2)
- * GPY0[5] EBI_EEn(2)
- *
- * GPY1[0] EBI_BEn[0](2)
- * GPY1[1] EBI_BEn[1](2)
- * GPY1[2] SROM_WAIT(2)
- * GPY1[3] EBI_DATA_RDn(2)
- */
- s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
- GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
- for (i = 0; i < 4; i++)
- s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
- /*
- * EBI: 8 Addrss Lines
- *
- * GPY3[0] EBI_ADDR[0](2)
- * GPY3[1] EBI_ADDR[1](2)
- * GPY3[2] EBI_ADDR[2](2)
- * GPY3[3] EBI_ADDR[3](2)
- * GPY3[4] EBI_ADDR[4](2)
- * GPY3[5] EBI_ADDR[5](2)
- * GPY3[6] EBI_ADDR[6](2)
- * GPY3[7] EBI_ADDR[7](2)
- *
- * EBI: 16 Data Lines
- *
- * GPY5[0] EBI_DATA[0](2)
- * GPY5[1] EBI_DATA[1](2)
- * GPY5[2] EBI_DATA[2](2)
- * GPY5[3] EBI_DATA[3](2)
- * GPY5[4] EBI_DATA[4](2)
- * GPY5[5] EBI_DATA[5](2)
- * GPY5[6] EBI_DATA[6](2)
- * GPY5[7] EBI_DATA[7](2)
- *
- * GPY6[0] EBI_DATA[8](2)
- * GPY6[1] EBI_DATA[9](2)
- * GPY6[2] EBI_DATA[10](2)
- * GPY6[3] EBI_DATA[11](2)
- * GPY6[4] EBI_DATA[12](2)
- * GPY6[5] EBI_DATA[13](2)
- * GPY6[6] EBI_DATA[14](2)
- * GPY6[7] EBI_DATA[15](2)
- */
- for (i = 0; i < 8; i++) {
- s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
- }
- break;
- default:
- debug("%s: invalid peripheral %d", __func__, peripheral);
- return -1;
- }
- return 0;
+}
+int exynos_pinmux_config(int peripheral, int flags) +{
- if (cpu_is_exynos5())
- return exynos5_pinmux_config(peripheral, flags);
- else{
- debug("pinmux functionality not supported\n");
- return -1;
- }
+} diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..306f521 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,77 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H
+/*
- Peripherals requiring clock/pinmux configuration. List will
- grow with support for more devices getting added.
- */
+enum periph_id {
- PERIPH_ID_SDMMC0,
- PERIPH_ID_SDMMC1,
- PERIPH_ID_SDMMC2,
- PERIPH_ID_SDMMC3,
- PERIPH_ID_SDMMC4,
- PERIPH_ID_SROMC,
- PERIPH_ID_UART0,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
- PERIPH_ID_COUNT,
- PERIPH_ID_NONE = -1,
+};
+/*
- Flags for setting specific configarations of peripherals.
- List will grow with support for more devices getting added.
- */
+enum {
- PINMUX_FLAG_NONE = 0x00000000,
- /* Flags for eMMC */
- PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
- /* Flags for SROM controller */
- PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
- PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+};
+/**
- Configures the pinmux for a particular peripheral.
- Each gpio can be configured in many different ways (4 bits on exynos)
- such as "input", "output", "special function", "external interrupt"
- etc. This function will configure the peripheral pinmux along with
- pull-up/down and drive strength.
- @param peripheral peripheral to be configured
- @param flags configure flags
- @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
+int exynos_pinmux_config(int peripheral, int flags);
+#endif
1.7.4.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Regards, Rajeshwari Shinde. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi,
On 4 May 2012 12:26, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
This patch performs the pinmux configuration in a common file. As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/pinmux.c | 189 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++ 2 files changed, 266 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..11f4b71 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,189 @@ +/*
- Copyright (c) 2012 Samsung Electronics.
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+int exynos5_pinmux_config(int peripheral, int flags)
It should be static
+{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank, *bank_ext;
- int i, start, count;
- switch (peripheral) {
- case PERIPH_ID_UART0:
- case PERIPH_ID_UART1:
- case PERIPH_ID_UART2:
- case PERIPH_ID_UART3:
- switch (peripheral) {
- case PERIPH_ID_UART0:
- bank = &gpio1->a0;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART1:
- bank = &gpio1->a0;
- start = 4; count = 4;
- break;
- case PERIPH_ID_UART2:
- bank = &gpio1->a1;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART3:
- bank = &gpio1->a1;
- start = 4; count = 2;
- break;
- }
- for (i = start; i < start + count; i++) {
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- }
- break;
- case PERIPH_ID_SDMMC0:
- case PERIPH_ID_SDMMC1:
- case PERIPH_ID_SDMMC2:
- case PERIPH_ID_SDMMC3:
- switch (peripheral) {
- case PERIPH_ID_SDMMC0:
- bank = &gpio1->c0; bank_ext = &gpio1->c1;
- break;
- case PERIPH_ID_SDMMC1:
- bank = &gpio1->c1; bank_ext = NULL;
- break;
- case PERIPH_ID_SDMMC2:
- bank = &gpio1->c2; bank_ext = &gpio1->c3;
- break;
- case PERIPH_ID_SDMMC3:
- bank = &gpio1->c3; bank_ext = NULL;
- break;
- }
- if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
- debug("SDMMC device %d does not support 8bit mode",
- peripheral);
- return -1;
- }
- if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
- s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
- }
- }
- for (i = 0; i < 2; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- break;
- case PERIPH_ID_SROMC:
- /*
- * SROM:CS1 and EBI
- *
- * GPY0[0] SROM_CSn[0]
- * GPY0[1] SROM_CSn[1](2)
- * GPY0[2] SROM_CSn[2]
- * GPY0[3] SROM_CSn[3]
- * GPY0[4] EBI_OEn(2)
- * GPY0[5] EBI_EEn(2)
- *
- * GPY1[0] EBI_BEn[0](2)
- * GPY1[1] EBI_BEn[1](2)
- * GPY1[2] SROM_WAIT(2)
- * GPY1[3] EBI_DATA_RDn(2)
- */
- s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
- GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
- for (i = 0; i < 4; i++)
- s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
- /*
- * EBI: 8 Addrss Lines
- *
- * GPY3[0] EBI_ADDR[0](2)
- * GPY3[1] EBI_ADDR[1](2)
- * GPY3[2] EBI_ADDR[2](2)
- * GPY3[3] EBI_ADDR[3](2)
- * GPY3[4] EBI_ADDR[4](2)
- * GPY3[5] EBI_ADDR[5](2)
- * GPY3[6] EBI_ADDR[6](2)
- * GPY3[7] EBI_ADDR[7](2)
- *
- * EBI: 16 Data Lines
- *
- * GPY5[0] EBI_DATA[0](2)
- * GPY5[1] EBI_DATA[1](2)
- * GPY5[2] EBI_DATA[2](2)
- * GPY5[3] EBI_DATA[3](2)
- * GPY5[4] EBI_DATA[4](2)
- * GPY5[5] EBI_DATA[5](2)
- * GPY5[6] EBI_DATA[6](2)
- * GPY5[7] EBI_DATA[7](2)
- *
- * GPY6[0] EBI_DATA[8](2)
- * GPY6[1] EBI_DATA[9](2)
- * GPY6[2] EBI_DATA[10](2)
- * GPY6[3] EBI_DATA[11](2)
- * GPY6[4] EBI_DATA[12](2)
- * GPY6[5] EBI_DATA[13](2)
- * GPY6[6] EBI_DATA[14](2)
- * GPY6[7] EBI_DATA[15](2)
- */
- for (i = 0; i < 8; i++) {
- s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
- }
- break;
- default:
- debug("%s: invalid peripheral %d", __func__, peripheral);
- return -1;
- }
- return 0;
+}
+int exynos_pinmux_config(int peripheral, int flags) +{
- if (cpu_is_exynos5())
- return exynos5_pinmux_config(peripheral, flags);
- else{
- debug("pinmux functionality not supported\n");
- return -1;
- }
+} diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..306f521 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,77 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H
+/*
- Peripherals requiring clock/pinmux configuration. List will
- grow with support for more devices getting added.
- */
+enum periph_id {
- PERIPH_ID_SDMMC0,
- PERIPH_ID_SDMMC1,
- PERIPH_ID_SDMMC2,
- PERIPH_ID_SDMMC3,
- PERIPH_ID_SDMMC4,
- PERIPH_ID_SROMC,
- PERIPH_ID_UART0,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
- PERIPH_ID_COUNT,
- PERIPH_ID_NONE = -1,
+};
+/*
- Flags for setting specific configarations of peripherals.
- List will grow with support for more devices getting added.
- */
+enum {
- PINMUX_FLAG_NONE = 0x00000000,
- /* Flags for eMMC */
- PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
- /* Flags for SROM controller */
- PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
- PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+};
+/**
- Configures the pinmux for a particular peripheral.
- Each gpio can be configured in many different ways (4 bits on exynos)
- such as "input", "output", "special function", "external interrupt"
- etc. This function will configure the peripheral pinmux along with
- pull-up/down and drive strength.
- @param peripheral peripheral to be configured
- @param flags configure flags
- @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
+int exynos_pinmux_config(int peripheral, int flags);
+#endif
1.7.4.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi,
On Tue, May 22, 2012 at 11:12 PM, Chander Kashyap < chander.kashyap@linaro.org> wrote:
Hi,
On 4 May 2012 12:26, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
This patch performs the pinmux configuration in a common file. As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/pinmux.c | 189
+++++++++++++++++++++++++++++
arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++ 2 files changed, 266 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c
b/arch/arm/cpu/armv7/exynos/pinmux.c
new file mode 100644 index 0000000..11f4b71 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,189 @@ +/*
- Copyright (c) 2012 Samsung Electronics.
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+int exynos5_pinmux_config(int peripheral, int flags)
It should be static
It can't be static, as it is called from board files, drivers, etc.
+{
struct exynos5_gpio_part1 *gpio1 =(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
struct s5p_gpio_bank *bank, *bank_ext;int i, start, count;switch (peripheral) {case PERIPH_ID_UART0:case PERIPH_ID_UART1:case PERIPH_ID_UART2:case PERIPH_ID_UART3:switch (peripheral) {case PERIPH_ID_UART0:bank = &gpio1->a0;start = 0; count = 4;break;case PERIPH_ID_UART1:bank = &gpio1->a0;start = 4; count = 4;break;case PERIPH_ID_UART2:bank = &gpio1->a1;start = 0; count = 4;break;case PERIPH_ID_UART3:bank = &gpio1->a1;start = 4; count = 2;break;}for (i = start; i < start + count; i++) {s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));}break;case PERIPH_ID_SDMMC0:case PERIPH_ID_SDMMC1:case PERIPH_ID_SDMMC2:case PERIPH_ID_SDMMC3:switch (peripheral) {case PERIPH_ID_SDMMC0:bank = &gpio1->c0; bank_ext = &gpio1->c1;break;case PERIPH_ID_SDMMC1:bank = &gpio1->c1; bank_ext = NULL;break;case PERIPH_ID_SDMMC2:bank = &gpio1->c2; bank_ext = &gpio1->c3;break;case PERIPH_ID_SDMMC3:bank = &gpio1->c3; bank_ext = NULL;break;}if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {debug("SDMMC device %d does not support 8bitmode",
peripheral);return -1;}if (flags & PINMUX_FLAG_8BIT_MODE) {for (i = 3; i <= 6; i++) {s5p_gpio_cfg_pin(bank_ext, i,GPIO_FUNC(0x3));
s5p_gpio_set_pull(bank_ext, i,GPIO_PULL_UP);
s5p_gpio_set_drv(bank_ext, i,GPIO_DRV_4X);
}}for (i = 0; i < 2; i++) {s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);}for (i = 3; i <= 6; i++) {s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);}break;case PERIPH_ID_SROMC:/** SROM:CS1 and EBI** GPY0[0] SROM_CSn[0]* GPY0[1] SROM_CSn[1](2)* GPY0[2] SROM_CSn[2]* GPY0[3] SROM_CSn[3]* GPY0[4] EBI_OEn(2)* GPY0[5] EBI_EEn(2)** GPY1[0] EBI_BEn[0](2)* GPY1[1] EBI_BEn[1](2)* GPY1[2] SROM_WAIT(2)* GPY1[3] EBI_DATA_RDn(2)*/s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),GPIO_FUNC(2));s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));for (i = 0; i < 4; i++)s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));/** EBI: 8 Addrss Lines** GPY3[0] EBI_ADDR[0](2)* GPY3[1] EBI_ADDR[1](2)* GPY3[2] EBI_ADDR[2](2)* GPY3[3] EBI_ADDR[3](2)* GPY3[4] EBI_ADDR[4](2)* GPY3[5] EBI_ADDR[5](2)* GPY3[6] EBI_ADDR[6](2)* GPY3[7] EBI_ADDR[7](2)** EBI: 16 Data Lines** GPY5[0] EBI_DATA[0](2)* GPY5[1] EBI_DATA[1](2)* GPY5[2] EBI_DATA[2](2)* GPY5[3] EBI_DATA[3](2)* GPY5[4] EBI_DATA[4](2)* GPY5[5] EBI_DATA[5](2)* GPY5[6] EBI_DATA[6](2)* GPY5[7] EBI_DATA[7](2)** GPY6[0] EBI_DATA[8](2)* GPY6[1] EBI_DATA[9](2)* GPY6[2] EBI_DATA[10](2)* GPY6[3] EBI_DATA[11](2)* GPY6[4] EBI_DATA[12](2)* GPY6[5] EBI_DATA[13](2)* GPY6[6] EBI_DATA[14](2)* GPY6[7] EBI_DATA[15](2)*/for (i = 0; i < 8; i++) {s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);}break;default:debug("%s: invalid peripheral %d", __func__, peripheral);return -1;}return 0;+}
+int exynos_pinmux_config(int peripheral, int flags) +{
if (cpu_is_exynos5())return exynos5_pinmux_config(peripheral, flags);else{debug("pinmux functionality not supported\n");return -1;}+} diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h
b/arch/arm/include/asm/arch-exynos/pinmux.h
new file mode 100644 index 0000000..306f521 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,77 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H
+/*
- Peripherals requiring clock/pinmux configuration. List will
- grow with support for more devices getting added.
- */
+enum periph_id {
PERIPH_ID_SDMMC0,PERIPH_ID_SDMMC1,PERIPH_ID_SDMMC2,PERIPH_ID_SDMMC3,PERIPH_ID_SDMMC4,PERIPH_ID_SROMC,PERIPH_ID_UART0,PERIPH_ID_UART1,PERIPH_ID_UART2,PERIPH_ID_UART3,PERIPH_ID_COUNT,PERIPH_ID_NONE = -1,+};
+/*
- Flags for setting specific configarations of peripherals.
- List will grow with support for more devices getting added.
- */
+enum {
PINMUX_FLAG_NONE = 0x00000000,/* Flags for eMMC */PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode *//* Flags for SROM controller */PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */+};
+/**
- Configures the pinmux for a particular peripheral.
- Each gpio can be configured in many different ways (4 bits on exynos)
- such as "input", "output", "special function", "external interrupt"
- etc. This function will configure the peripheral pinmux along with
- pull-up/down and drive strength.
- @param peripheral peripheral to be configured
- @param flags configure flags
- @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
+int exynos_pinmux_config(int peripheral, int flags);
+#endif
1.7.4.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- with warm regards, Chander Kashyap _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Regards, Simon
Hi,
On Thu, May 3, 2012 at 11:56 PM, Rajeshwari Shinde <rajeshwari.s@samsung.com
wrote:
This patch performs the pinmux configuration in a common file. As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/pinmux.c | 189 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++ 2 files changed, 266 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..11f4b71 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,189 @@ +/*
- Copyright (c) 2012 Samsung Electronics.
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+int exynos5_pinmux_config(int peripheral, int flags) +{
struct exynos5_gpio_part1 *gpio1 =(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
struct s5p_gpio_bank *bank, *bank_ext;int i, start, count;switch (peripheral) {case PERIPH_ID_UART0:case PERIPH_ID_UART1:case PERIPH_ID_UART2:case PERIPH_ID_UART3:switch (peripheral) {case PERIPH_ID_UART0:bank = &gpio1->a0;start = 0; count = 4;break;case PERIPH_ID_UART1:bank = &gpio1->a0;start = 4; count = 4;break;case PERIPH_ID_UART2:bank = &gpio1->a1;start = 0; count = 4;break;case PERIPH_ID_UART3:bank = &gpio1->a1;start = 4; count = 2;break;}for (i = start; i < start + count; i++) {s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));}break;case PERIPH_ID_SDMMC0:case PERIPH_ID_SDMMC1:case PERIPH_ID_SDMMC2:case PERIPH_ID_SDMMC3:switch (peripheral) {case PERIPH_ID_SDMMC0:bank = &gpio1->c0; bank_ext = &gpio1->c1;break;case PERIPH_ID_SDMMC1:bank = &gpio1->c1; bank_ext = NULL;break;case PERIPH_ID_SDMMC2:bank = &gpio1->c2; bank_ext = &gpio1->c3;break;case PERIPH_ID_SDMMC3:bank = &gpio1->c3; bank_ext = NULL;break;}if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {debug("SDMMC device %d does not support 8bit mode",peripheral);return -1;}if (flags & PINMUX_FLAG_8BIT_MODE) {for (i = 3; i <= 6; i++) {s5p_gpio_cfg_pin(bank_ext, i,GPIO_FUNC(0x3));
s5p_gpio_set_pull(bank_ext, i,GPIO_PULL_UP);
s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);}}for (i = 0; i < 2; i++) {s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);}for (i = 3; i <= 6; i++) {s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);}break;case PERIPH_ID_SROMC:/** SROM:CS1 and EBI** GPY0[0] SROM_CSn[0]* GPY0[1] SROM_CSn[1](2)* GPY0[2] SROM_CSn[2]* GPY0[3] SROM_CSn[3]* GPY0[4] EBI_OEn(2)* GPY0[5] EBI_EEn(2)** GPY1[0] EBI_BEn[0](2)* GPY1[1] EBI_BEn[1](2)* GPY1[2] SROM_WAIT(2)* GPY1[3] EBI_DATA_RDn(2)*/s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),GPIO_FUNC(2));s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));for (i = 0; i < 4; i++)s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));/** EBI: 8 Addrss Lines** GPY3[0] EBI_ADDR[0](2)* GPY3[1] EBI_ADDR[1](2)* GPY3[2] EBI_ADDR[2](2)* GPY3[3] EBI_ADDR[3](2)* GPY3[4] EBI_ADDR[4](2)* GPY3[5] EBI_ADDR[5](2)* GPY3[6] EBI_ADDR[6](2)* GPY3[7] EBI_ADDR[7](2)** EBI: 16 Data Lines** GPY5[0] EBI_DATA[0](2)* GPY5[1] EBI_DATA[1](2)* GPY5[2] EBI_DATA[2](2)* GPY5[3] EBI_DATA[3](2)* GPY5[4] EBI_DATA[4](2)* GPY5[5] EBI_DATA[5](2)* GPY5[6] EBI_DATA[6](2)* GPY5[7] EBI_DATA[7](2)** GPY6[0] EBI_DATA[8](2)* GPY6[1] EBI_DATA[9](2)* GPY6[2] EBI_DATA[10](2)* GPY6[3] EBI_DATA[11](2)* GPY6[4] EBI_DATA[12](2)* GPY6[5] EBI_DATA[13](2)* GPY6[6] EBI_DATA[14](2)* GPY6[7] EBI_DATA[15](2)*/for (i = 0; i < 8; i++) {s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);}break;default:debug("%s: invalid peripheral %d", __func__, peripheral);return -1;}return 0;+}
+int exynos_pinmux_config(int peripheral, int flags) +{
if (cpu_is_exynos5())return exynos5_pinmux_config(peripheral, flags);
Oh I see.
You could perhaps put this check in the above function, but it seems odd that this function is in the exynos directory instead of exynos5. It seems like this code would be specific to a particular chip, but I don't know much about it.
If you do want this, then {} around the if() bit also.
+ else{
space
debug("pinmux functionality not supported\n");return -1;}+} diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..306f521 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,77 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H
+/*
- Peripherals requiring clock/pinmux configuration. List will
- grow with support for more devices getting added.
- */
+enum periph_id {
PERIPH_ID_SDMMC0,PERIPH_ID_SDMMC1,PERIPH_ID_SDMMC2,PERIPH_ID_SDMMC3,PERIPH_ID_SDMMC4,PERIPH_ID_SROMC,PERIPH_ID_UART0,PERIPH_ID_UART1,PERIPH_ID_UART2,PERIPH_ID_UART3,PERIPH_ID_COUNT,PERIPH_ID_NONE = -1,+};
+/*
- Flags for setting specific configarations of peripherals.
- List will grow with support for more devices getting added.
- */
+enum {
PINMUX_FLAG_NONE = 0x00000000,/* Flags for eMMC */PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode *//* Flags for SROM controller */PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */+};
+/**
- Configures the pinmux for a particular peripheral.
- Each gpio can be configured in many different ways (4 bits on exynos)
- such as "input", "output", "special function", "external interrupt"
- etc. This function will configure the peripheral pinmux along with
- pull-up/down and drive strength.
- @param peripheral peripheral to be configured
- @param flags configure flags
- @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
+int exynos_pinmux_config(int peripheral, int flags);
+#endif
1.7.4.4
Regards, Simon
Hi Simon,
Thank you for comments.
On Fri, Jun 1, 2012 at 6:05 AM, Simon Glass sjg@chromium.org wrote:
Hi,
On Thu, May 3, 2012 at 11:56 PM, Rajeshwari Shinde <rajeshwari.s@samsung.com
wrote:
This patch performs the pinmux configuration in a common file. As of now only Exynos5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
arch/arm/cpu/armv7/exynos/pinmux.c | 189 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 77 ++++++++++++ 2 files changed, 266 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..11f4b71 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,189 @@ +/*
- Copyright (c) 2012 Samsung Electronics.
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+int exynos5_pinmux_config(int peripheral, int flags) +{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *)
samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank, *bank_ext;
- int i, start, count;
- switch (peripheral) {
- case PERIPH_ID_UART0:
- case PERIPH_ID_UART1:
- case PERIPH_ID_UART2:
- case PERIPH_ID_UART3:
- switch (peripheral) {
- case PERIPH_ID_UART0:
- bank = &gpio1->a0;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART1:
- bank = &gpio1->a0;
- start = 4; count = 4;
- break;
- case PERIPH_ID_UART2:
- bank = &gpio1->a1;
- start = 0; count = 4;
- break;
- case PERIPH_ID_UART3:
- bank = &gpio1->a1;
- start = 4; count = 2;
- break;
- }
- for (i = start; i < start + count; i++) {
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- }
- break;
- case PERIPH_ID_SDMMC0:
- case PERIPH_ID_SDMMC1:
- case PERIPH_ID_SDMMC2:
- case PERIPH_ID_SDMMC3:
- switch (peripheral) {
- case PERIPH_ID_SDMMC0:
- bank = &gpio1->c0; bank_ext = &gpio1->c1;
- break;
- case PERIPH_ID_SDMMC1:
- bank = &gpio1->c1; bank_ext = NULL;
- break;
- case PERIPH_ID_SDMMC2:
- bank = &gpio1->c2; bank_ext = &gpio1->c3;
- break;
- case PERIPH_ID_SDMMC3:
- bank = &gpio1->c3; bank_ext = NULL;
- break;
- }
- if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
- debug("SDMMC device %d does not support 8bit mode",
- peripheral);
- return -1;
- }
- if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank_ext, i,
GPIO_FUNC(0x3));
- s5p_gpio_set_pull(bank_ext, i,
GPIO_PULL_UP);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
- }
- }
- for (i = 0; i < 2; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
- }
- break;
- case PERIPH_ID_SROMC:
- /*
- * SROM:CS1 and EBI
- *
- * GPY0[0] SROM_CSn[0]
- * GPY0[1] SROM_CSn[1](2)
- * GPY0[2] SROM_CSn[2]
- * GPY0[3] SROM_CSn[3]
- * GPY0[4] EBI_OEn(2)
- * GPY0[5] EBI_EEn(2)
- *
- * GPY1[0] EBI_BEn[0](2)
- * GPY1[1] EBI_BEn[1](2)
- * GPY1[2] SROM_WAIT(2)
- * GPY1[3] EBI_DATA_RDn(2)
- */
- s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
- GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
- for (i = 0; i < 4; i++)
- s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
- /*
- * EBI: 8 Addrss Lines
- *
- * GPY3[0] EBI_ADDR[0](2)
- * GPY3[1] EBI_ADDR[1](2)
- * GPY3[2] EBI_ADDR[2](2)
- * GPY3[3] EBI_ADDR[3](2)
- * GPY3[4] EBI_ADDR[4](2)
- * GPY3[5] EBI_ADDR[5](2)
- * GPY3[6] EBI_ADDR[6](2)
- * GPY3[7] EBI_ADDR[7](2)
- *
- * EBI: 16 Data Lines
- *
- * GPY5[0] EBI_DATA[0](2)
- * GPY5[1] EBI_DATA[1](2)
- * GPY5[2] EBI_DATA[2](2)
- * GPY5[3] EBI_DATA[3](2)
- * GPY5[4] EBI_DATA[4](2)
- * GPY5[5] EBI_DATA[5](2)
- * GPY5[6] EBI_DATA[6](2)
- * GPY5[7] EBI_DATA[7](2)
- *
- * GPY6[0] EBI_DATA[8](2)
- * GPY6[1] EBI_DATA[9](2)
- * GPY6[2] EBI_DATA[10](2)
- * GPY6[3] EBI_DATA[11](2)
- * GPY6[4] EBI_DATA[12](2)
- * GPY6[5] EBI_DATA[13](2)
- * GPY6[6] EBI_DATA[14](2)
- * GPY6[7] EBI_DATA[15](2)
- */
- for (i = 0; i < 8; i++) {
- s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
- }
- break;
- default:
- debug("%s: invalid peripheral %d", __func__, peripheral);
- return -1;
- }
- return 0;
+}
+int exynos_pinmux_config(int peripheral, int flags) +{
- if (cpu_is_exynos5())
- return exynos5_pinmux_config(peripheral, flags);
Oh I see.
You could perhaps put this check in the above function, but it seems odd that this function is in the exynos directory instead of exynos5. It seems like this code would be specific to a particular chip, but I don't know much about it.
-- Currently in the mainline code we have a common directory for both exynos4 and exynos5 hence we have put this check. There are no separate directories for exynos4 and exynos5.
If you do want this, then {} around the if() bit also.
-- will correct this
- else{
space
- debug("pinmux functionality not supported\n");
- return -1;
- }
+} diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..306f521 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,77 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H
+/*
- Peripherals requiring clock/pinmux configuration. List will
- grow with support for more devices getting added.
- */
+enum periph_id {
- PERIPH_ID_SDMMC0,
- PERIPH_ID_SDMMC1,
- PERIPH_ID_SDMMC2,
- PERIPH_ID_SDMMC3,
- PERIPH_ID_SDMMC4,
- PERIPH_ID_SROMC,
- PERIPH_ID_UART0,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
- PERIPH_ID_COUNT,
- PERIPH_ID_NONE = -1,
+};
+/*
- Flags for setting specific configarations of peripherals.
- List will grow with support for more devices getting added.
- */
+enum {
- PINMUX_FLAG_NONE = 0x00000000,
- /* Flags for eMMC */
- PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */
- /* Flags for SROM controller */
- PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
- PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+};
+/**
- Configures the pinmux for a particular peripheral.
- Each gpio can be configured in many different ways (4 bits on exynos)
- such as "input", "output", "special function", "external interrupt"
- etc. This function will configure the peripheral pinmux along with
- pull-up/down and drive strength.
- @param peripheral peripheral to be configured
- @param flags configure flags
- @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
+int exynos_pinmux_config(int peripheral, int flags);
+#endif
1.7.4.4
Regards, Simon
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Regards, Rajeshwari Shinde.
participants (4)
-
Chander Kashyap -
Rajeshwari Birje -
Rajeshwari Shinde -
Simon Glass