[U-Boot] [PATCH 1/2 V6] EXYNOS5: PINMUX: Added default pinumx settings
This patch performs the pinmux configuration in a common file. As of now only EXYNOS5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Chander Kashyap chander.kashyap@linaro.org Acked-by: Simon Glass sjg@chromium.org --- Changes in V2: - Adding pinmux.c to Makefile moved to this patch. - exynos5_pinmux_config made static Changes in V3: - Separate functions made for each peripheral - enum periph_id moved to a separate periph.h Changes in V4: - removed variable declarations from exynos5_pinmux_config Changes in V5: - added a return statement for function exynos5_mmc_config and added a check for same Changes in V6: - Added a blank line arch/arm/cpu/armv7/exynos/Makefile | 2 +- arch/arm/cpu/armv7/exynos/pinmux.c | 220 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/periph.h | 47 ++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 58 ++++++++ 4 files changed, 326 insertions(+), 1 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/periph.h create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index 90ec2bd..9119961 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o +COBJS += clock.o power.o soc.o system.o pinmux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..d2b7d2c --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,220 @@ +/* + * Copyright (c) 2012 Samsung Electronics. + * Abhilash Kesavan a.kesavan@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h> + +static void exynos5_uart_config(int peripheral) +{ + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct s5p_gpio_bank *bank; + int i, start, count; + + switch (peripheral) { + case PERIPH_ID_UART0: + bank = &gpio1->a0; + start = 0; + count = 4; + break; + case PERIPH_ID_UART1: + bank = &gpio1->a0; + start = 4; + count = 4; + break; + case PERIPH_ID_UART2: + bank = &gpio1->a1; + start = 0; + count = 4; + break; + case PERIPH_ID_UART3: + bank = &gpio1->a1; + start = 4; + count = 2; + break; + } + for (i = start; i < start + count; i++) { + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + } +} + +static int exynos5_mmc_config(int peripheral, int flags) +{ + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct s5p_gpio_bank *bank, *bank_ext; + int i; + + switch (peripheral) { + case PERIPH_ID_SDMMC0: + bank = &gpio1->c0; + bank_ext = &gpio1->c1; + break; + case PERIPH_ID_SDMMC1: + bank = &gpio1->c1; + bank_ext = NULL; + break; + case PERIPH_ID_SDMMC2: + bank = &gpio1->c2; + bank_ext = &gpio1->c3; + break; + case PERIPH_ID_SDMMC3: + bank = &gpio1->c3; + bank_ext = NULL; + break; + } + if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) { + debug("SDMMC device %d does not support 8bit mode", + peripheral); + return -1; + } + if (flags & PINMUX_FLAG_8BIT_MODE) { + for (i = 3; i <= 6; i++) { + s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP); + s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); + } + } + for (i = 0; i < 2; i++) { + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + for (i = 3; i <= 6; i++) { + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + return 0; +} + +static void exynos5_sromc_config(int flags) +{ + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + int i; + + /* + * SROM:CS1 and EBI + * + * GPY0[0] SROM_CSn[0] + * GPY0[1] SROM_CSn[1](2) + * GPY0[2] SROM_CSn[2] + * GPY0[3] SROM_CSn[3] + * GPY0[4] EBI_OEn(2) + * GPY0[5] EBI_EEn(2) + * + * GPY1[0] EBI_BEn[0](2) + * GPY1[1] EBI_BEn[1](2) + * GPY1[2] SROM_WAIT(2) + * GPY1[3] EBI_DATA_RDn(2) + */ + s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK), + GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2)); + + for (i = 0; i < 4; i++) + s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2)); + + /* + * EBI: 8 Addrss Lines + * + * GPY3[0] EBI_ADDR[0](2) + * GPY3[1] EBI_ADDR[1](2) + * GPY3[2] EBI_ADDR[2](2) + * GPY3[3] EBI_ADDR[3](2) + * GPY3[4] EBI_ADDR[4](2) + * GPY3[5] EBI_ADDR[5](2) + * GPY3[6] EBI_ADDR[6](2) + * GPY3[7] EBI_ADDR[7](2) + * + * EBI: 16 Data Lines + * + * GPY5[0] EBI_DATA[0](2) + * GPY5[1] EBI_DATA[1](2) + * GPY5[2] EBI_DATA[2](2) + * GPY5[3] EBI_DATA[3](2) + * GPY5[4] EBI_DATA[4](2) + * GPY5[5] EBI_DATA[5](2) + * GPY5[6] EBI_DATA[6](2) + * GPY5[7] EBI_DATA[7](2) + * + * GPY6[0] EBI_DATA[8](2) + * GPY6[1] EBI_DATA[9](2) + * GPY6[2] EBI_DATA[10](2) + * GPY6[3] EBI_DATA[11](2) + * GPY6[4] EBI_DATA[12](2) + * GPY6[5] EBI_DATA[13](2) + * GPY6[6] EBI_DATA[14](2) + * GPY6[7] EBI_DATA[15](2) + */ + for (i = 0; i < 8; i++) { + s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP); + + s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP); + + s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2)); + s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP); + } +} + +static int exynos5_pinmux_config(int peripheral, int flags) +{ + switch (peripheral) { + case PERIPH_ID_UART0: + case PERIPH_ID_UART1: + case PERIPH_ID_UART2: + case PERIPH_ID_UART3: + exynos5_uart_config(peripheral); + break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC2: + case PERIPH_ID_SDMMC3: + return exynos5_mmc_config(peripheral, flags); + case PERIPH_ID_SROMC: + exynos5_sromc_config(flags); + break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + +int exynos_pinmux_config(int peripheral, int flags) +{ + if (cpu_is_exynos5()) + return exynos5_pinmux_config(peripheral, flags); + else { + debug("pinmux functionality not supported\n"); + return -1; + } +} diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h new file mode 100644 index 0000000..5db25aa --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde rajeshwari.s@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_PERIPH_H +#define __ASM_ARM_ARCH_PERIPH_H + +/* + * Peripherals requiring clock/pinmux configuration. List will + * grow with support for more devices getting added. + * + */ +enum periph_id { + PERIPH_ID_SDMMC0, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC2, + PERIPH_ID_SDMMC3, + PERIPH_ID_SROMC, + PERIPH_ID_UART0, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_UART3, + + PERIPH_ID_COUNT, + PERIPH_ID_NONE = -1, +}; + +#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..10ea736 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Abhilash Kesavan a.kesavan@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H + +#include "periph.h" + +/* + * Flags for setting specific configarations of peripherals. + * List will grow with support for more devices getting added. + */ +enum { + PINMUX_FLAG_NONE = 0x00000000, + + /* Flags for eMMC */ + PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */ + + /* Flags for SROM controller */ + PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */ + PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */ +}; + +/** + * Configures the pinmux for a particular peripheral. + * + * Each gpio can be configured in many different ways (4 bits on exynos) + * such as "input", "output", "special function", "external interrupt" + * etc. This function will configure the peripheral pinmux along with + * pull-up/down and drive strength. + * + * @param peripheral peripheral to be configured + * @param flags configure flags + * @return 0 if ok, -1 on error (e.g. unsupported peripheral) + */ +int exynos_pinmux_config(int peripheral, int flags); + +#endif
Use the pinmux configuration function for SMDK5250.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Chander Kashyap chander.kashyap@linaro.org Acked-by: Simon Glass sjg@chromium.org --- Changes in V2: - Removed exynos5_gpio_part1 *gpio1 global variable as initialised in pinmux.c. Changes in V3: - Added a error return for smc9115_pre_init and board_uart_init. Changes in V6: - none board/samsung/smdk5250/smdk5250.c | 176 ++++++++----------------------------- 1 files changed, 38 insertions(+), 138 deletions(-)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 32786e2..3b078da 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -26,81 +26,16 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> #include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR; -struct exynos5_gpio_part1 *gpio1;
#ifdef CONFIG_SMC911X -static void smc9115_pre_init(void) +static int smc9115_pre_init(void) { u32 smc_bw_conf, smc_bc_conf; - int i; - - /* - * SROM:CS1 and EBI - * - * GPY0[0] SROM_CSn[0] - * GPY0[1] SROM_CSn[1](2) - * GPY0[2] SROM_CSn[2] - * GPY0[3] SROM_CSn[3] - * GPY0[4] EBI_OEn(2) - * GPY0[5] EBI_EEn(2) - * - * GPY1[0] EBI_BEn[0](2) - * GPY1[1] EBI_BEn[1](2) - * GPY1[2] SROM_WAIT(2) - * GPY1[3] EBI_DATA_RDn(2) - */ - s5p_gpio_cfg_pin(&gpio1->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2)); - s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2)); - s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2)); - - for (i = 0; i < 4; i++) - s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2)); - - /* - * EBI: 8 Addrss Lines - * - * GPY3[0] EBI_ADDR[0](2) - * GPY3[1] EBI_ADDR[1](2) - * GPY3[2] EBI_ADDR[2](2) - * GPY3[3] EBI_ADDR[3](2) - * GPY3[4] EBI_ADDR[4](2) - * GPY3[5] EBI_ADDR[5](2) - * GPY3[6] EBI_ADDR[6](2) - * GPY3[7] EBI_ADDR[7](2) - * - * EBI: 16 Data Lines - * - * GPY5[0] EBI_DATA[0](2) - * GPY5[1] EBI_DATA[1](2) - * GPY5[2] EBI_DATA[2](2) - * GPY5[3] EBI_DATA[3](2) - * GPY5[4] EBI_DATA[4](2) - * GPY5[5] EBI_DATA[5](2) - * GPY5[6] EBI_DATA[6](2) - * GPY5[7] EBI_DATA[7](2) - * - * GPY6[0] EBI_DATA[8](2) - * GPY6[1] EBI_DATA[9](2) - * GPY6[2] EBI_DATA[10](2) - * GPY6[3] EBI_DATA[11](2) - * GPY6[4] EBI_DATA[12](2) - * GPY6[5] EBI_DATA[13](2) - * GPY6[6] EBI_DATA[14](2) - * GPY6[7] EBI_DATA[15](2) - */ - for (i = 0; i < 8; i++) { - s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2)); - s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP); - - s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2)); - s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP); - - s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2)); - s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP); - } + int err;
/* Ethernet needs data bus width of 16 bits */ smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK) @@ -112,14 +47,20 @@ static void smc9115_pre_init(void) | SROMC_BC_PMC(0x01);
/* Select and configure the SROMC bank */ + err = exynos_pinmux_config(PERIPH_ID_SROMC, + CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT); + if (err) { + debug("SROMC not configured\n"); + return err; + } + s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf); + return 0; } #endif
int board_init(void) { - gpio1 = (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); - gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); return 0; } @@ -168,7 +109,8 @@ void dram_init_banksize(void) int board_eth_init(bd_t *bis) { #ifdef CONFIG_SMC911X - smc9115_pre_init(); + if (smc9115_pre_init()) + return -1; return smc911x_initialize(0, CONFIG_SMC911X_BASE); #endif return 0; @@ -186,31 +128,12 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - int i, err; - - /* - * MMC2 SD card GPIO: - * - * GPC2[0] SD_2_CLK(2) - * GPC2[1] SD_2_CMD(2) - * GPC2[2] SD_2_CDn - * GPC2[3:6] SD_2_DATA[0:3](2) - */ - for (i = 0; i < 7; i++) { - /* GPC2[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio1->c2, i, GPIO_FUNC(0x2)); - - /* GPK2[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio1->c2, i, GPIO_DRV_4X); + int err;
- /* GPK2[0:1] pull disable */ - if (i == 0 || i == 1) { - s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_NONE); - continue; - } - - /* GPK2[2:6] pull up */ - s5p_gpio_set_pull(&gpio1->c2, i, GPIO_PULL_UP); + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err) { + debug("SDMMC2 not configured\n"); + return err; }
err = s5p_mmc_init(2, 4); @@ -218,63 +141,40 @@ int board_mmc_init(bd_t *bis) } #endif
-static void board_uart_init(void) +static int board_uart_init(void) { - struct exynos5_gpio_part1 *gpio1 = - (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); - int i; + int err;
- /* - * UART0 GPIOs : GPA0CON[3:0] 0x2222 - * Must set CFG17 switches to select UART0 to use. - */ - for (i = 0; i <= 3; i++) { - s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2)); + err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE); + if (err) { + debug("UART0 not configured\n"); + return err; }
- /* - * UART1 GPIOs : GPA0CON[5:4] 0x22 - * Must set CFG17 switches to select UART1 to use. - * - * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down - * in order to use them (so that those pins can be used for I2C). - */ - for (i = 4; i <= 5; i++) { - s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2)); + err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE); + if (err) { + debug("UART1 not configured\n"); + return err; }
- /* - * UART2 GPIOs : GPA1CON[1:0] 0x22 - * Must set CFG17 switches to select UART2 to use. - * - * This only sets RXD/TXD, as RTS/CTS need a resistor soldered down - * in order to use them (so that those pins can be used for I2C). - */ - for (i = 0; i <= 1; i++) { - s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2)); + err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE); + if (err) { + debug("UART2 not configured\n"); + return err; }
- /* - * UART3 GPIOs : GPA1CON[5:4] 0x22 - * Must set CFG16 switches to select UART3 to use. - */ - for (i = 4; i <= 5; i++) { - s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE); - s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC(0x2)); + err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); + if (err) { + debug("UART3 not configured\n"); + return err; }
- /* - * There's no mux for UART4--it's internal only - */ + return 0; }
#ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { - board_uart_init(); - return 0; + return board_uart_init(); } #endif
On Wed, Jun 6, 2012 at 10:54 PM, Rajeshwari Shinde <rajeshwari.s@samsung.com
wrote:
Use the pinmux configuration function for SMDK5250.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Chander Kashyap chander.kashyap@linaro.org Acked-by: Simon Glass sjg@chromium.org
Acked-by: Simon Glass sjg@chromium.org
Changes in V2: - Removed exynos5_gpio_part1 *gpio1 global variable as initialised in pinmux.c. Changes in V3: - Added a error return for smc9115_pre_init and board_uart_init. Changes in V6: - none board/samsung/smdk5250/smdk5250.c | 176 ++++++++-----------------------------
On 10 June 2012 05:15, Simon Glass sjg@chromium.org wrote:
On Wed, Jun 6, 2012 at 10:54 PM, Rajeshwari Shinde <rajeshwari.s@samsung.com
wrote:
Use the pinmux configuration function for SMDK5250.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Chander Kashyap chander.kashyap@linaro.org Acked-by: Simon Glass sjg@chromium.org
Acked-by: Simon Glass sjg@chromium.org
Changes in V2: - Removed exynos5_gpio_part1 *gpio1 global variable as initialised in pinmux.c. Changes in V3: - Added a error return for smc9115_pre_init and board_uart_init. Changes in V6: - none board/samsung/smdk5250/smdk5250.c | 176 ++++++++-----------------------------
applied to u-boot-samsung.
Thanks. Minkyu Kang.
On Wed, Jun 6, 2012 at 10:54 PM, Rajeshwari Shinde <rajeshwari.s@samsung.com
wrote:
This patch performs the pinmux configuration in a common file. As of now only EXYNOS5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Chander Kashyap chander.kashyap@linaro.org Acked-by: Simon Glass sjg@chromium.org
Acked-by: Simon Glass sjg@chromium.org
Changes in V2: - Adding pinmux.c to Makefile moved to this patch. - exynos5_pinmux_config made static Changes in V3: - Separate functions made for each peripheral - enum periph_id moved to a separate periph.h Changes in V4: - removed variable declarations from exynos5_pinmux_config Changes in V5: - added a return statement for function exynos5_mmc_config and added a check for same Changes in V6: - Added a blank line arch/arm/cpu/armv7/exynos/Makefile | 2 +- arch/arm/cpu/armv7/exynos/pinmux.c | 220 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/periph.h | 47 ++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 58 ++++++++ 4 files changed, 326 insertions(+), 1 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/periph.h create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index 90ec2bd..9119961 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o +COBJS += clock.o power.o soc.o system.o pinmux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c new file mode 100644 index 0000000..d2b7d2c --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -0,0 +1,220 @@ +/*
- Copyright (c) 2012 Samsung Electronics.
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <common.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h>
+static void exynos5_uart_config(int peripheral) +{
struct exynos5_gpio_part1 *gpio1 =(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
struct s5p_gpio_bank *bank;int i, start, count;switch (peripheral) {case PERIPH_ID_UART0:bank = &gpio1->a0;start = 0;count = 4;break;case PERIPH_ID_UART1:bank = &gpio1->a0;start = 4;count = 4;break;case PERIPH_ID_UART2:bank = &gpio1->a1;start = 0;count = 4;break;case PERIPH_ID_UART3:bank = &gpio1->a1;start = 4;count = 2;break;}for (i = start; i < start + count; i++) {s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));}+}
+static int exynos5_mmc_config(int peripheral, int flags) +{
struct exynos5_gpio_part1 *gpio1 =(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
struct s5p_gpio_bank *bank, *bank_ext;int i;switch (peripheral) {case PERIPH_ID_SDMMC0:bank = &gpio1->c0;bank_ext = &gpio1->c1;break;case PERIPH_ID_SDMMC1:bank = &gpio1->c1;bank_ext = NULL;break;case PERIPH_ID_SDMMC2:bank = &gpio1->c2;bank_ext = &gpio1->c3;break;case PERIPH_ID_SDMMC3:bank = &gpio1->c3;bank_ext = NULL;break;}if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {debug("SDMMC device %d does not support 8bit mode",peripheral);return -1;}if (flags & PINMUX_FLAG_8BIT_MODE) {for (i = 3; i <= 6; i++) {s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);}}for (i = 0; i < 2; i++) {s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);}for (i = 3; i <= 6; i++) {s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);}return 0;+}
+static void exynos5_sromc_config(int flags) +{
struct exynos5_gpio_part1 *gpio1 =(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
int i;/** SROM:CS1 and EBI** GPY0[0] SROM_CSn[0]* GPY0[1] SROM_CSn[1](2)* GPY0[2] SROM_CSn[2]* GPY0[3] SROM_CSn[3]* GPY0[4] EBI_OEn(2)* GPY0[5] EBI_EEn(2)** GPY1[0] EBI_BEn[0](2)* GPY1[1] EBI_BEn[1](2)* GPY1[2] SROM_WAIT(2)* GPY1[3] EBI_DATA_RDn(2)*/s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),GPIO_FUNC(2));s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));for (i = 0; i < 4; i++)s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));/** EBI: 8 Addrss Lines** GPY3[0] EBI_ADDR[0](2)* GPY3[1] EBI_ADDR[1](2)* GPY3[2] EBI_ADDR[2](2)* GPY3[3] EBI_ADDR[3](2)* GPY3[4] EBI_ADDR[4](2)* GPY3[5] EBI_ADDR[5](2)* GPY3[6] EBI_ADDR[6](2)* GPY3[7] EBI_ADDR[7](2)** EBI: 16 Data Lines** GPY5[0] EBI_DATA[0](2)* GPY5[1] EBI_DATA[1](2)* GPY5[2] EBI_DATA[2](2)* GPY5[3] EBI_DATA[3](2)* GPY5[4] EBI_DATA[4](2)* GPY5[5] EBI_DATA[5](2)* GPY5[6] EBI_DATA[6](2)* GPY5[7] EBI_DATA[7](2)** GPY6[0] EBI_DATA[8](2)* GPY6[1] EBI_DATA[9](2)* GPY6[2] EBI_DATA[10](2)* GPY6[3] EBI_DATA[11](2)* GPY6[4] EBI_DATA[12](2)* GPY6[5] EBI_DATA[13](2)* GPY6[6] EBI_DATA[14](2)* GPY6[7] EBI_DATA[15](2)*/for (i = 0; i < 8; i++) {s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);}+}
+static int exynos5_pinmux_config(int peripheral, int flags) +{
switch (peripheral) {case PERIPH_ID_UART0:case PERIPH_ID_UART1:case PERIPH_ID_UART2:case PERIPH_ID_UART3:exynos5_uart_config(peripheral);break;case PERIPH_ID_SDMMC0:case PERIPH_ID_SDMMC1:case PERIPH_ID_SDMMC2:case PERIPH_ID_SDMMC3:return exynos5_mmc_config(peripheral, flags);case PERIPH_ID_SROMC:exynos5_sromc_config(flags);break;default:debug("%s: invalid peripheral %d", __func__, peripheral);return -1;}return 0;+}
+int exynos_pinmux_config(int peripheral, int flags) +{
if (cpu_is_exynos5())return exynos5_pinmux_config(peripheral, flags);else {debug("pinmux functionality not supported\n");return -1;}+} diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h new file mode 100644 index 0000000..5db25aa --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -0,0 +1,47 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Rajeshwari Shinde rajeshwari.s@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PERIPH_H +#define __ASM_ARM_ARCH_PERIPH_H
+/*
- Peripherals requiring clock/pinmux configuration. List will
- grow with support for more devices getting added.
- */
+enum periph_id {
PERIPH_ID_SDMMC0,PERIPH_ID_SDMMC1,PERIPH_ID_SDMMC2,PERIPH_ID_SDMMC3,PERIPH_ID_SROMC,PERIPH_ID_UART0,PERIPH_ID_UART1,PERIPH_ID_UART2,PERIPH_ID_UART3,PERIPH_ID_COUNT,PERIPH_ID_NONE = -1,+};
+#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h new file mode 100644 index 0000000..10ea736 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -0,0 +1,58 @@ +/*
- Copyright (C) 2012 Samsung Electronics
- Abhilash Kesavan a.kesavan@samsung.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __ASM_ARM_ARCH_PINMUX_H +#define __ASM_ARM_ARCH_PINMUX_H
+#include "periph.h"
+/*
- Flags for setting specific configarations of peripherals.
- List will grow with support for more devices getting added.
- */
+enum {
PINMUX_FLAG_NONE = 0x00000000,/* Flags for eMMC */PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode *//* Flags for SROM controller */PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */+};
+/**
- Configures the pinmux for a particular peripheral.
- Each gpio can be configured in many different ways (4 bits on exynos)
- such as "input", "output", "special function", "external interrupt"
- etc. This function will configure the peripheral pinmux along with
- pull-up/down and drive strength.
- @param peripheral peripheral to be configured
- @param flags configure flags
- @return 0 if ok, -1 on error (e.g. unsupported peripheral)
- */
+int exynos_pinmux_config(int peripheral, int flags);
+#endif
1.7.4.4
On 10 June 2012 05:13, Simon Glass sjg@chromium.org wrote:
On Wed, Jun 6, 2012 at 10:54 PM, Rajeshwari Shinde <rajeshwari.s@samsung.com
wrote:
This patch performs the pinmux configuration in a common file. As of now only EXYNOS5 pinmux for SDMMC, UART and Ethernet is supported.
Signed-off-by: Abhilash Kesavan a.kesavan@samsung.com Signed-off-by: Che-Liang Chiou clchiou@chromium.org Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Chander Kashyap chander.kashyap@linaro.org Acked-by: Simon Glass sjg@chromium.org
Acked-by: Simon Glass sjg@chromium.org
Changes in V2: - Adding pinmux.c to Makefile moved to this patch. - exynos5_pinmux_config made static Changes in V3: - Separate functions made for each peripheral - enum periph_id moved to a separate periph.h Changes in V4: - removed variable declarations from exynos5_pinmux_config Changes in V5: - added a return statement for function exynos5_mmc_config and added a check for same Changes in V6: - Added a blank line arch/arm/cpu/armv7/exynos/Makefile | 2 +- arch/arm/cpu/armv7/exynos/pinmux.c | 220 +++++++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/periph.h | 47 ++++++ arch/arm/include/asm/arch-exynos/pinmux.h | 58 ++++++++ 4 files changed, 326 insertions(+), 1 deletions(-) create mode 100644 arch/arm/cpu/armv7/exynos/pinmux.c create mode 100644 arch/arm/include/asm/arch-exynos/periph.h create mode 100644 arch/arm/include/asm/arch-exynos/pinmux.h
applied to u-boot-samsung.
Thanks. Minkyu Kang.
participants (3)
-
Minkyu Kang -
Rajeshwari Shinde -
Simon Glass