Re: [U-Boot-Users] [DNX#2006091242000041] [PATCH] Additional MPC8349 support for multibus i2 [...]

Hello list,
inside the automatic U-Boot patch tracking system a new ticket [DNX#2006091242000041] was created:
<snip>
Hello,
Here is a patch for a file that was accidentally left out of a previous attempt.
It accompanies the patch with ticket DNX#2006090742000024
CHANGELOG: Change PCI initialization to use new multi-bus I2C API.
regards, Ben
diff --git a/board/mpc8349emds/pci.c b/board/mpc8349emds/pci.c index 63e4405..cfe12ff 100644 --- a/board/mpc8349emds/pci.c +++ b/board/mpc8349emds/pci.c @@ -68,11 +68,16 @@ static struct pci_controller pci_hose[] void pib_init(void) {
- u8 val8;
- u8 val8, orig_i2c_bus; /*
*/
- Assign PIB PMC slot to desired PCI bus
- mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET);
/* Switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
if(orig_i2c_bus != I2C_BUS_2)
i2c_set_bus_num(I2C_BUS_2);
i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
val8 = 0;
@@ -118,6 +123,9 @@ pib_init(void) printf("PCI1: 32-bit on PMC1, PMC2\n"); printf("PCI2: 32-bit on PMC3\n"); #endif
- /* Reset to original I2C bus */
- if(orig_i2c_bus != I2C_BUS_2)
i2c_set_bus_num(orig_i2c_bus);
}
/**************************************************************************
</snip>
Your U-Boot support team
participants (1)
-
DENX Support System