Hello,

I am trying to put u-boot on my Embedded Planet Board EP8248 and it keeps looping in the initialization cycle:

U-Boot 1.1.2 (Dec 13 2004 - 21:11:34) MPC8248 Reset Status: Check Stop, External Soft, External Hard MPC8248 Clock Configuration - Bus-to-Core Mult 3.5x, VCO Div 2, 60x Bus Freq 30-85 , Core Freq 100-300 - dfbrg 1, corecnf 0x0e, busdf 3, cpmdf 1, plldf 0, pllmf 5 - vco_out 396000000, scc_clk 99000000, brg_clk 24750000 - cpu_clk 231000000, cpm_clk 198000000, bus_clk 66000000 - pci_clk 66000000 CPU: MPC8248 (HiP7 Rev 13, Mask 0.0 0K50M) at 231 MHz Board: EP8248E 1.0 CPLD revision 2 I2C: ready DRAM: 128 M U-Boot 1.1.2 (Dec 13 2004 - 21:11:34) MPC8248 Reset Status: Check Stop, External Soft, External Hard MPC8248 Clock Configuration ......

Could you make some suggestions? I thought U-boot has been successfully ported to EP8248 board. My board has 128Mbyte SDRAM and 64MB of flash.

Thanks,

Nguyen