Hello, has anybody u-boot running on i.mx27 litekit from LogicPD, please? I have this board with Logic Loader 2.4.9. I'm more familiar with uBoot so I wanted to try it on the desk. Compilation from actual master runs without any problem, but unfortunately it does not run after loading with lolo my commands were
load load elf /tftp/10.0.0.1:u-boot
loading from /tftp/10.0.0.1:u-boot: ............................................................................................................... ELF section 0: download address: 0xa0208000 load address: 0xc0000000 loaded 238792 @ 0xc0000000 Flash ...done
exec - -> now the LoLo started again
Could you please give me any help, please?
best regards Jan
On 07/01/2011 04:15 PM, Jan Pohanka wrote:
Hello, has anybody u-boot running on i.mx27 litekit from LogicPD, please?
I have now compiled, no problems at all:
U-Boot 2011.06-00022-gc88d13a (Jul 01 2011 - 16:18:04)
CPU: Freescale i.MX27 at 399 MHz
Board: LogicPD imx27lite DRAM: 128 MiB Flash: 2 MiB NAND: 64 MiB MMC: MXC MCI: 0 In: serial Out: serial Err: serial Net: FEC Hit any key to stop autoboot: 0
load load elf /tftp/10.0.0.1:u-boot
loading from /tftp/10.0.0.1:u-boot: ............................................................................................................... ELF section 0: download address: 0xa0208000 load address: 0xc0000000 loaded 238792 @ 0xc0000000 Flash ...done
exec - -> now the LoLo started again
No idea which is this LoLo.
Best regards, Stefano Babic
On Fri, Jul 1, 2011 at 11:15 AM, Jan Pohanka xhpohanka@gmail.com wrote:
Hello, has anybody u-boot running on i.mx27 litekit from LogicPD, please? I have this board with Logic Loader 2.4.9. I'm more familiar with uBoot so I wanted to try it on the desk. Compilation from actual master runs without any problem, but unfortunately it does not run after loading with lolo my commands were
Why don't you erase Lolo and flash U-boot into flash?
Regards,
Fabio Estevam
Thank you for answer, unfortunately I don't have a JTAG and don't know if there is some ISP programming possibility, yet. I will try to find it out.
regards Jan
Dne Fri, 01 Jul 2011 16:32:09 +0200 Fabio Estevam festevam@gmail.com napsal(a):
On Fri, Jul 1, 2011 at 11:15 AM, Jan Pohanka xhpohanka@gmail.com wrote:
Hello, has anybody u-boot running on i.mx27 litekit from LogicPD, please? I have this board with Logic Loader 2.4.9. I'm more familiar with uBoot so I wanted to try it on the desk. Compilation from actual master runs without any problem, but unfortunately it does not run after loading with lolo my commands were
Why don't you erase Lolo and flash U-boot into flash?
Regards,
Fabio Estevam
participants (3)
-
Fabio Estevam -
Jan Pohanka -
Stefano Babic