[U-Boot-Users] Ati M6 initialization in u-boot
Hi,
How can i initialize an ATI M6 video card with u-boot for a ppc 440?
Regards,
Roberto
In message 000d01c5c410$7cb402e0$8700a8c0@SN7855 you wrote:
How can i initialize an ATI M6 video card with u-boot for a ppc 440?
You asked the same question before on the linuxppc-embedded mailing list, and received several replies already.
In U-Boot, you can find an x86 emulator in the board/MAI/bios_emulator/ directory; so far this has only been used by the AmigaOneG3SE board.
You will probably have to spend some effort to get it working for your configuration.
Best regards,
Wolfgang Denk
On Wednesday 28 September 2005 11:39, Roberto Pavon Sierra wrote:
Hi,
How can i initialize an ATI M6 video card with u-boot for a ppc 440?
Hi Roberto,
I'm not sure if you're reading answers (you got one on the ppc-embedded list), but you're bothering now at least three lists with the same question over and over again and I think it's now time to accept that there is no painless way to get a solution for your problem.
One thing: if you don't get any answer to your request(s), then it's because nobody has a solution. AND, this circumstance won't change if you ask a hundred times.
Ciao, Gerhard
participants (3)
-
Gerhard Jaeger -
Roberto Pavon Sierra -
Wolfgang Denk