On Fri, Jan 11, 2013 at 03:45:26PM +0100, Jens Scharsig wrote:

Am 2012-11-23 23:23, schrieb Angelo Dureghello:

...

Fix coldfire serial driver bindings no more relocated to ram after last changes to drivers/serial/serial.c (regression). Serial initialization in ram has to be called after that gd->reloc_off is calculated.

Signed-off-by: Angelo Dureghello sysamfw@gmail.com Cc: Jason Jin jason.jin@freescale.com

---

diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 02d73fd..373570c 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)

    gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */

•   serial_initialize();
  

•   debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
  
    WATCHDOG_RESET ();
  
    gd->reloc_off =  dest_addr - CONFIG_SYS_MONITOR_BASE;
  
  

• serial_initialize();

•   monitor_flash_len = (ulong)&__init_end - dest_addr;
  
  

#if defined(CONFIG_NEEDS_MANUAL_RELOC)

Acked-by: Jens Scharsig (BuS Elektronik) esw@bus-elektronik.de Tested-by: Jens Scharsig (BuS Elektronik) esw@bus-elektronik.de

Applied to u-boot/master, thanks!