[U-Boot] [PATCH] arm64: zynqmp: Enable SPI support in SPL for zcu104
It is enabling this mode but full boot is not validated yet.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
configs/xilinx_zynqmp_zcu104_revC_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 1c9a6d6f1ec4..2f269009dfe9 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y @@ -16,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_ATF=y CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y
st 11. 9. 2019 v 9:10 odesÃlatel Michal Simek michal.simek@xilinx.com napsal:
It is enabling this mode but full boot is not validated yet.
Signed-off-by: Michal Simek michal.simek@xilinx.com
configs/xilinx_zynqmp_zcu104_revC_defconfig | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 1c9a6d6f1ec4..2f269009dfe9 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -5,6 +5,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y @@ -16,6 +18,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_ATF=y CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y -- 2.17.1
Applied. M
participants (2)
-
Michal Simek -
Michal Simek