From: Alessandro Rubini rubini@unipv.it

This patch cleans up some glitches in the initial submission: - nobody calls it "nmdk8815": the board is "nhk8815", so rename - nand and onenand can coexist, so fix config file accordingly - configure the chip select for OneNand, so it works properly - removed a pair of unused defines and reordered the jffs defs - add some comments and an explanation of the two configs

Signed-off-by: Alessandro Rubini rubini@unipv.it Acked-by: Andrea Gallo andrea.gallo@stericsson.com ---

If needed I can split this, but I think it's trivial enough. Over this I'll send a few additions in the next days.

Makefile | 10 ++-- board/st/{nmdk8815 => nhk8815}/Makefile | 2 +- board/st/{nmdk8815 => nhk8815}/config.mk | 0 .../st/{nmdk8815/nmdk8815.c => nhk8815/nhk8815.c} | 4 ++ board/st/{nmdk8815 => nhk8815}/platform.S | 0 cpu/arm926ejs/nomadik/reset.S | 12 +---- doc/{README.nmdk8815 => README.nhk8815} | 9 +++ include/configs/{nmdk8815.h => nhk8815.h} | 57 ++++++++++++-------- 8 files changed, 55 insertions(+), 39 deletions(-) rename board/st/{nmdk8815 => nhk8815}/Makefile (98%) rename board/st/{nmdk8815 => nhk8815}/config.mk (100%) rename board/st/{nmdk8815/nmdk8815.c => nhk8815/nhk8815.c} (91%) rename board/st/{nmdk8815 => nhk8815}/platform.S (100%) rename doc/{README.nmdk8815 => README.nhk8815} (75%) rename include/configs/{nmdk8815.h => nhk8815.h} (77%)

diff --git a/Makefile b/Makefile index acec1a0..14ba063 100644 --- a/Makefile +++ b/Makefile @@ -2841,17 +2841,17 @@ mx1fs2_config : unconfig netstar_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t netstar

-nmdk8815_config \ -nmdk8815_onenand_config: unconfig +nhk8815_config \ +nhk8815_onenand_config: unconfig @mkdir -p $(obj)include @ > $(obj)include/config.h @if [ "$(findstring _onenand, $@)" ] ; then \ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ - $(XECHO) "... configured for OneNand Flash"; \ + $(XECHO) "... configured to boot from OneNand Flash"; \ else \ - $(XECHO) "... configured for Nand Flash"; \ + $(XECHO) "... configured to boot from Nand Flash"; \ fi - @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik + @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik

omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn diff --git a/board/st/nmdk8815/Makefile b/board/st/nhk8815/Makefile similarity index 98% rename from board/st/nmdk8815/Makefile rename to board/st/nhk8815/Makefile index be9a424..b37fe53 100644 --- a/board/st/nmdk8815/Makefile +++ b/board/st/nhk8815/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib$(BOARD).a

-COBJS := nmdk8815.o +COBJS := nhk8815.o SOBJS := platform.o

SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/st/nmdk8815/config.mk b/board/st/nhk8815/config.mk similarity index 100% rename from board/st/nmdk8815/config.mk rename to board/st/nhk8815/config.mk diff --git a/board/st/nmdk8815/nmdk8815.c b/board/st/nhk8815/nhk8815.c similarity index 91% rename from board/st/nmdk8815/nmdk8815.c rename to board/st/nhk8815/nhk8815.c index edf4626..085a5e0 100644 --- a/board/st/nmdk8815/nmdk8815.c +++ b/board/st/nhk8815/nhk8815.c @@ -53,6 +53,10 @@ int board_init(void) writel(0x0000305b, REG_FSMC_BCR1); writel(0x00033f33, REG_FSMC_BTR1);

+ /* Set up SMCS0 for OneNand: sram-like once again */ + writel(0x000030db, NOMADIK_FSMC_BASE + 0x00); /* FSMC_BCR0 */ + writel(0x02100551, NOMADIK_FSMC_BASE + 0x04); /* FSMC_BTR0 */ + icache_enable(); return 0; } diff --git a/board/st/nmdk8815/platform.S b/board/st/nhk8815/platform.S similarity index 100% rename from board/st/nmdk8815/platform.S rename to board/st/nhk8815/platform.S diff --git a/cpu/arm926ejs/nomadik/reset.S b/cpu/arm926ejs/nomadik/reset.S index 948996b..694c32b 100644 --- a/cpu/arm926ejs/nomadik/reset.S +++ b/cpu/arm926ejs/nomadik/reset.S @@ -6,20 +6,10 @@ .align 5 .globl reset_cpu reset_cpu: -#if defined CONFIG_NOMADIK_8815 - ldr r0, =NOMADIK_SRC_BASE + ldr r0, =NOMADIK_SRC_BASE /* System and Reset Controller */ ldr r1, =0x1 str r1, [r0, #0x18] -#else - ldr r1, rstctl1 /* get clkm1 reset ctl */ - mov r3, #0x0 - strh r3, [r1] /* clear it */ - mov r3, #0x8 - strh r3, [r1] /* force dsp+arm reset */ -#endif

_loop_forever: b _loop_forever

-rstctl1: - .word 0xfffece10 diff --git a/doc/README.nmdk8815 b/doc/README.nhk8815 similarity index 75% rename from doc/README.nmdk8815 rename to doc/README.nhk8815 index 453cfae..940f24d 100644 --- a/doc/README.nmdk8815 +++ b/doc/README.nhk8815 @@ -15,6 +15,15 @@ SDRAM configuration, PLL setup and initial loading from NAND is implemented in the X-Loader, so U-Boot is already running in SDRAM when control is handed over to it.

+The Makefile offers two different configurations to be used if you +boot from Nand or OneNand. + + make nhk8815_config + make nhk8815_onenand_config + +Both support OneNand and Nand. Since U-Boot, running in RAM, can't know +where it was loaded from, the configurations differ in where the filesystem +is looked for by default.

On www.st.com/nomadik and on www.stnwireless.com there are documents, summary data and white papers on Nomadik. The full datasheet for diff --git a/include/configs/nmdk8815.h b/include/configs/nhk8815.h similarity index 77% rename from include/configs/nmdk8815.h rename to include/configs/nhk8815.h index 6d7b94f..bf1a915 100644 --- a/include/configs/nmdk8815.h +++ b/include/configs/nhk8815.h @@ -1,7 +1,8 @@ /* * (C) Copyright 2005 * STMicroelectronics. - * Configuration settings for the STn8815 nomadik board. + * Configuration settings for the "Nomadik Hardware Kit" NHK-8815, + * the evaluation board for the Nomadik 8815 System on Chip. * * See file CREDITS for list of people who contributed to this * project. @@ -29,9 +30,8 @@

#define CONFIG_ARM926EJS #define CONFIG_NOMADIK -#define CONFIG_NOMADIK_8815 -#define CONFIG_NOMADIK_NDK15 -#define CONFIG_NOMADIK_NHK15 +#define CONFIG_NOMADIK_8815 /* cpu variant */ +#define CONFIG_NOMADIK_NHK8815 /* board variant */

#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */

@@ -55,6 +55,7 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "Nomadik> " #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -90,6 +91,7 @@ #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ +#define CONFIG_SYS_64BIT_VSPRINTF /* mtd desires this */

#define CONFIG_MISC_INIT_R /* call misc_init_r during start up */

@@ -120,43 +122,54 @@ #define CONFIG_SMC_USE_32_BIT #define CONFIG_BOOTFILE "uImage"

-/* flash memory and filesystem information */ -#define CONFIG_DOS_PARTITION +/* Storage information: onenand and nand */ +#define CONFIG_CMD_ONENAND #define CONFIG_MTD_ONENAND_VERIFY_WRITE #define CONFIG_SYS_ONENAND_BASE 0x30000000 + +#define CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 /* SMPS0n */

+/* + * Filesystem information + * + * Since U-Boot has been loaded to RAM by vendor code, we could use + * either or both OneNand and Nand. However, we need to know where the + * filesystem lives. Comments below report vendor-selected partitions + */ #ifdef CONFIG_BOOT_ONENAND - -# define CONFIG_CMD_ONENAND /* Temporary: nand and onenand can't coexist */ /* Partition Size Start * XloaderTOC + X-Loader 256KB 0x00000000 * Memory init function 256KB 0x00040000 - * U-Boot 2MB 0x00080000 + * U-Boot + env 2MB 0x00080000 * Sysimage (kernel + ramdisk) 4MB 0x00280000 * JFFS2 Root filesystem 22MB 0x00680000 * JFFS2 User Data 227.5MB 0x01C80000 */ -# define CONFIG_JFFS2_PART_SIZE 0x400000 -# define CONFIG_JFFS2_PART_OFFSET 0x280000 - +# define CONFIG_JFFS2_DEV "onenand0" +# define CONFIG_JFFS2_PART_SIZE 0x01600000 +# define CONFIG_JFFS2_PART_OFFSET 0x00680000 # define CONFIG_ENV_IS_IN_ONENAND -# define CONFIG_ENV_SIZE (256 * 1024) -# define CONFIG_ENV_ADDR 0x30300000 - -#else /* ! CONFIG_BOOT_ONENAND */ - -# define CONFIG_CMD_NAND /* Temporary: nand and onenand can't coexist */ +# define CONFIG_ENV_SIZE 0x20000 /* 128 Kb - one sector */ +# define CONFIG_ENV_ADDR (0x00280000 - CONFIG_ENV_SIZE)

+#else /* BOOT_NAND */ + /* Partition Size Start + * XloaderTOC + X-Loader 256KB 0x00000000 + * Memory init function 256KB 0x00040000 + * U-Boot + env 2MB 0x00080000 + * Kernel Image 3MB 0x00280000 + * JFFS2 Root filesystem 22MB 0x00580000 + * JFFS2 User Data 100.5MB 0x01b80000 + */ # define CONFIG_JFFS2_DEV "nand0" # define CONFIG_JFFS2_NAND 1 /* For the jffs2 support*/ -# define CONFIG_JFFS2_PART_SIZE 0x00300000 -# define CONFIG_JFFS2_PART_OFFSET 0x00280000 - +# define CONFIG_JFFS2_PART_SIZE 0x01600000 +# define CONFIG_JFFS2_PART_OFFSET 0x00580000 # define CONFIG_ENV_IS_IN_NAND # define CONFIG_ENV_SIZE 0x20000 /* 128 Kb - one sector */ -# define CONFIG_ENV_OFFSET (0x8000000 - CONFIG_ENV_SIZE) +# define CONFIG_ENV_OFFSET (0x00280000 - CONFIG_ENV_SIZE)

#endif /* CONFIG_BOOT_ONENAND */