[U-Boot-Users] Boot Code Chip Select
Hello All,
I have a MPC852T based board with a Boot Flash on CS0 and User Flash on CS2.
Boot Flash mapped at Address 0xFE000000 and User Flash location at Address 0xFA000000.
Can we load the u-boot code on to the User Flash on CS1, and boot from there ? If so what are the changes required ?
Warm Regards, Raghu.
__________________________________ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html
In message 20040206040100.89537.qmail@web40407.mail.yahoo.com you wrote:
I have a MPC852T based board with a Boot Flash on CS0 and User Flash on CS2.
...
Can we load the u-boot code on to the User Flash on CS1, and boot from there ? If so what are the changes required ?
No, you cannot, unless you modify the processor :-)
The MPC8xx will always boot from the device attached to CS0.
Best regards,
Wolfgang Denk
participants (2)
-
Raghu -
Wolfgang Denk